We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
Icom RC-28 + RS-BA1 Version2 (Package)
SKU Part Number:
RC-28
Icom is pleased to launch the RC-28 IP remote control system that allows a user to control selected Icom HF Amateur radio transceivers through an IP...
Read More
Read More
£282.00
£235.00
Pre Order
Seen this product cheaper elseware?
Call 0345 2300 599Icom is pleased to launch the RC-28 IP remote control system that allows a user to control selected Icom HF Amateur radio transceivers through an IP Network. This new system includes the RS-BA1 remote control software together with a remote control USB encoder which provides users with a radio operator’s style interface for controlling this new software product.
Introducing the RS-BA1 Version 2 Dualwatch Remote Control Software
Update: Dec 4 2018
The RS-BA1 remote control software gained popularity by allowing Amateur radio operators to operate selected Icom radios from a PC via IP. A new version of this software is now available called RS-BA1 Version 2 which will allow users to take advantage of some of the features of HF radios such as the IC-7610, IC-7851 and IC-7850 including dualwatch operation and dual spectrum scope.
The RS-BA1 Version 2 will allow the dualwatch operation and dual spectrum scopes with waterfall functions* to be used on a remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 Version 2 at the same time.
The RS-BA1 Version 2 can be used with Icom single receiver transceivers, however, we advise that you consult with the product leaflet for the level of compatibility and available functions.
Introducing the RS-BA1 Version 2 Dualwatch Remote Control Software
Update: Dec 4 2018
The RS-BA1 remote control software gained popularity by allowing Amateur radio operators to operate selected Icom radios from a PC via IP. A new version of this software is now available called RS-BA1 Version 2 which will allow users to take advantage of some of the features of HF radios such as the IC-7610, IC-7851 and IC-7850 including dualwatch operation and dual spectrum scope.
The RS-BA1 Version 2 will allow the dualwatch operation and dual spectrum scopes with waterfall functions* to be used on a remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 Version 2 at the same time.
The RS-BA1 Version 2 can be used with Icom single receiver transceivers, however, we advise that you consult with the product leaflet for the level of compatibility and available functions.
RC-28 Remote Control USB Encoder
The RC-28 utilises the same tuning knob and encoder used on Icom HF radios, (identical to the IC-7000) providing a tactile option for the bundled RS-BA1 IP control software. The table top controller includes a sturdy PTT and two user-programmable function keys. The RC-28 is not a standalone control for Icom radios and may only be used with the RS-BA1 software.
Remotely Control Icom Transceivers through an IP network
The included RS-BA1 control software allows you to use the radio installed in another room using your home network or even from a remote location over the Internet.
Low voice latency (caused by the RS-BA1) provides the same operational experience as using an actual radio.
Advanced remote control interface tailored to Icom transceivers
Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled. Also, S-meter and SWR can be observed. Also has RX voice recording function.
- The RS-BA1 consists with two component software applications; Systems configuration software and remote control software. The system configuration software sets up IP address, audio sampling rate and other settings. The remote control software provides a user interface, similar to the radio's front panel, and allows you to control the radio from a remote location.
- The IC-7600, IC-7200 or IC-9100 can be connected to a PC with a USB cable and the input/output audio signal and CI-V command is sent through the USB cable.
- The IC-7800 or IC-7700 can be connected to a PC with a RS-232C cable plus S/P DIF or ACC cable.
- The IC-756PRO111, IC-746PRO, IC-7400 or IC-7000 can be connected to a PC with an audio cable and RS-232C cable through CT-17 CI-V level converter*
*RS-BA1 operation with the Base station's PC connected to the radio's ACC socket, MIC connector, or S/P DIF jack for audio communication cannot be guaranteed.
*Depending on your radio, a few functions or modes cannot be used, or you need to update the radio's firmware to operate the CW keyer, using the RS-BA1
Supplied items
- CD (including the RS-BA1 instruction manual, the RS-BA1 installer, the USB driver and the USB driver installation guide)
- USB cable (A-B type)
- Installation guides
Operating System requirements
- Microsoft® Windows® 7 (32/64bit)
- Microsoft® Windows Vista® (32/64bit)
- Microsoft® Windows® XP (SP3 or later)
Network data speed requirement
For transceiver location: Upload 500 kbps, or faster; Download 350 kbps, or faster.
For the remote location: Upload 350kbps, or faster; Download 500 kbps, or faster.
(When the default audio quality is used)
All stated features, appearances, screen shots and specifications may be subject to change without notice.
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]