EAntenna WARC2+40 12/17/40 1 EL. 12-17-40m - R2010703
SKU Part Number: 17828.437
Specifications WARC2 +40 It consists of 3 elements positioned one above the other, optimizing the separation so that only through a coaxial...
Read More
£649.00 £540.83
Availability: In stock
call

Seen this product cheaper elseware?

Call 0345 2300 599


Specifications WARC2 +40
      • It consists of 3 elements positioned one above the other, optimizing the separation so that only through a coaxial drop the 3 bands get to act without altering the signal and the result from the interaction between bands and elements.
      • Items divided into several sections, simulated for wind resistance greater than 150 kmh.
      • Mast plate of 350x100mm with 6mm thick with U-bolts of M8 to the plate to the mast.

        Characteristics of the WARC2 +40
 
      • This antenna, though larger in size than a rigid dipole of the same bands, this antenna acts as an antenna of 1/2 wavelength, having 3,0 dBi in free space, which no rigid dipole market has it, unless it is single band. Except in the 40 meter band that manages to compress the half-wave length required by two coils with very high Q (Q> 850) to ensure smooth operation without appreciable losses. At 7 MHz presents only a degradation of 0.15 dB compared to a half-wave dipole full extension, which retrieves and exceeded in an actual installation to be perfectly extended branches off the common fixed installation inverted V-thread.
      • Simple and quick, because the elements are joined by rivets Aluminum facility for life, high pressure clamps on the ends to fit.
      • Antenna very solid construction, and with an acceptable weight.
      • It is recommended that in case of location on triband directives boom is located parallel to and at a distance not less than one meter.
 
ESPECIFICACIONES40m17m12m
Frequency Range: 7,0~7,3 18,00~18,17 24,8~25,0
Elements per Band: 1 1 1
Gain: 2,15 dBi 3,0 dBi 3,0 dBi
SWR: 1,1:1~2,0:0 (150 KHz.) 1,3:1~1,4:0 1,3:1~1,4:0
Impedance: 50 Ohm
Max. Power : 3 kW***
Total Length: 13,20m / 43,30'
Turning Radius: 6,60m / 21.65'
Wind survival: ≥ 160kmh / ≥ 100mph
Weight: 12,5 Kg / 27,5 Pounds
 
* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd
** Ratio Gain Front / Back “F / B” (gain when the antenna is rotated 180 ° azimuth direction)
*** Balun  included, there are options of 5 and 10 kW.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]