EAntenna EASLP80S SLOPER 80m 2Kw NEW - R2010030
SKU Part Number: 17902.SL080
Like all sloper antennas, this antenna works like a vertical antenna with a low elevation angle of the main lobe. This gives very good results for...
Read More
£109.96 £91.63
Pre Order
call

Seen this product cheaper elseware?

Call 0345 2300 599

Like all sloper antennas, this antenna works like a vertical antenna with a low elevation angle of the main lobe. This gives very good results for DX. Due to the mast there is a directivity, the mast acts as a reflector. If a wooden mast or another non-conductive mast is used, a cable must be laid down from the feed point.

The advantage of the sloper antenna results from the very simple installation, its flat radiation and the easy adjustment. The bandwidth does not cover the entire band, the minimum is at the lower end of the band (CW range). To adjust the antenna for the SSB range, it must be shortened slightly at the lower end, 5cm is usually sufficient.

The EAntenna Sloper is a monoband Lambda/4 antenna with a shortening coil to reduce the length of the antenna. The feed point is at the top of the mast, the mast acts as a reflector. This antenna does not contain a balun, but you can easily use a choke (1:1 balun, sheath wave block) at the feed point. The antenna wire is 2mm thick and protected against UV radiation for long life. The max. permissible transmitting power is 2 kW.

80m SLoper: required mast height for 45° rigging approx. 9.3m.
160m SLoper: required mast height for 45° rigging approx. 14.2m.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]