Par End-Fedz EF-SWL
SKU Part Number: VIB-EF-SWL
SPECIFICATIONS Design Frequency: 0-30 MHz Transformer: 9:1 ratio Grounding:  User configurable Radiator length: 45’ of #18 black polyethylene...
Read More
£89.99 £74.99
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

SPECIFICATIONS

Design Frequency: 0-30 MHz

Transformer: 9:1 ratio

Grounding:  User configurable

Radiator length: 45’ of #18 black polyethylene coated Flex-Weave wire

Connector: silver/Teflon SO-239

Hardware: Stainless steel

Polarity: User configurable

The Par EndFedz ® EF-SWL is an end-fed short wave antenna optimally designed for 0-30 MHz reception.  The radiator is 45 feet of #18 black polyethylene coated Flex-Weave wire.

The radiator wire is custom made for us.  It is a stranded #18 copperweld with a slippery polyethylene jacket.  Breaking strength is 280 pounds. Very flexible yet small diameter. The black polyethylene jacket is also very abrasion resistant. The UV resistant matchbox houses a wideband 9:1 transformer wound on a binocular core.  Unlike other transformers, external stainless studs on the matchbox allow the user to configure the primary and secondary grounds for best noise reduction at their particular location.  Examples are given in the manual.  Output is via a silver/Teflon® SO239 UHF connector (ready to accept a PL-259).  Lead-in coax cable is not provided.

The radiator also attaches via a stainless stud allowing it to be removed, or replaced with a different length radiator for experimental purposes. The included manual shows typical radiation patterns for selected frequencies through out the HF spectrum. (This is a receive-only antenna).

Click here to read the operation manual.

SPECIFICATIONS

Design Frequency: 0-30 MHz

Transformer: 9:1 ratio

Grounding:  User configurable

Radiator length: 45’ of #18 black polyethylene coated Flex-Weave wire

Connector: silver/Teflon SO-239

Hardware: Stainless steel

Polarity: User configurable

The Par EndFedz ® EF-SWL is an end-fed short wave antenna optimally designed for 0-30 MHz reception.  The radiator is 45 feet of #18 black polyethylene coated Flex-Weave wire.

The radiator wire is custom made for us.  It is a stranded #18 copperweld with a slippery polyethylene jacket.  Breaking strength is 280 pounds. Very flexible yet small diameter. The black polyethylene jacket is also very abrasion resistant. The UV resistant matchbox houses a wideband 9:1 transformer wound on a binocular core.  Unlike other transformers, external stainless studs on the matchbox allow the user to configure the primary and secondary grounds for best noise reduction at their particular location.  Examples are given in the manual.  Output is via a silver/Teflon® SO239 UHF connector (ready to accept a PL-259).  Lead-in coax cable is not provided.

The radiator also attaches via a stainless stud allowing it to be removed, or replaced with a different length radiator for experimental purposes. The included manual shows typical radiation patterns for selected frequencies through out the HF spectrum. (This is a receive-only antenna).

Click here to read the operation manual.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]