Chameleon HPD (High Performance Dipole) For CHA TD 2.0
SKU Part Number: CHA-HPD
Employing the optional High-Performance Wire kit (CHA HPD) as either antenna or counterpoise wires will also increase the gain, see figure gain graph...
Read More
£175.96 £146.63
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Employing the optional High-Performance Wire kit (CHA HPD) as either antenna or counterpoise wires will also increase the gain, see figure gain graph above. Based upon the antenna model, simply using the high - performance wire kit (CHA HPD) in place of the standard counterpoise wires increases the gain below 14 MHz an average of 2.6 dB, while still making the antenna easy to deploy, since the counterpose wires may be ran in any convenient direction and do not have to be straight.

 

All variations of the Sloping “V” / Inverted “V” antenna can also be installed without the terminated resistors. This can improve the performance of the antenna but may require the use of a tuner on most bands.

 

Modular Antenna Configurations 

 

The two primary antenna configurations described in the User Guide are the Terminated Sloping “V” / Inverted “V” and the Terminated Sloping Wire configurations, but the CHA TD 2.0 is a modularly designed wire antenna system. This modular design enables the CHA TD 2.0 to be configured into more than a dozen and a half operationally useful antenna configurations using existing components and the optional High Performance Wire kit (CHA HPD). The Tactical Dipole Modular Antenna Configurations table above shows other modular antenna configurations and variations not previously described. Refer to the installation procedures for the Sloping “V” / Inverted “V” or Sloping Wire Antennas for CHA TD 2.0 component connection details.  

 

The antenna system consists of:

2 X 108' Tinned Copper KEVLAR PTFE (Teflon) (-70°C to 150°C) wires

 

USER GUIDE

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]