EAntenna 144LFA11 - R2010103
SKU Part Number: 17740.11
Dimensions 223x10x10cm, Weight 9kg   The antennas for VHF EAntenna LFA represent the largest development in antennas with moderate boom...
Read More
£261.95 £218.29
Pre Order
call

Seen this product cheaper elseware?

Call 0345 2300 599
Dimensions 223x10x10cm, Weight 9kg  
 



The antennas for VHF EAntenna LFA represent the largest development in antennas with moderate boom length for a single performance.

This performance is characterized in that:

  • You can listen to very low signals without QRM and QRN noise alters the audio clarity.
  • The food is straightforward to 50 Ohms, which has not lost any respect to lines of adaptation. 
  • The bandwidth covers the entire band with low SWR / SWR.
  • The radiation lobe is wide, so that the signal is not as selective as you turn the minimum antenna.
  • Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
  • The gain is comparable with other models of antennas always larger in dimensions.
Specifications 144LFA11
  • 30x2mm square boom.
  • Elements of 8mm in diameter, except that the LOOP is 13mm and 10mm at the ends.
  • Mast plate of 150x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.

Characteristics of the 144LFA11

  • With this antenna elevation EME has been no problem and with only 100W. This means that the antenna is short 144LFA11 for those who want to start in the world of DX, EME and competitions seriously.
  • A clean lobe makes this antenna has a noise level of the lowest of all antennas LFA on the market.
  • Simple and quick, because the boom joints are easy to assemble.
  • Antenna very solid construction, and with a weight very acceptable.
  • Phasing distances for 2 or more units in a short (under table included) with our Power Splitter.
SPECIFICATIONSEAntenna 144LFA11
Frequency Range: 144~146 MHz.
Gain: 15,29 dBi
F/B: 28,59 dB
SWR: 1:1.1~1:1.2
Impedance: 50 Ohm
Maximum Power: 5 kW.
Boom length: 6,15m. / 20,16'
Wind Survival: ≥ 160kmh / ≥ 100mph
Weight: 9 Kg. / 19,8 Pounds

* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd
** Ratio Gain Front / Back “F / B” (gain when the antenna is rotated 180 ° azimuth direction)

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]