EAntenna 144LFA9 (14,13 dBi ヨ 25,26 dB F/B) - R2010149
SKU Part Number: 17740.09
Dimensions 151x10x10cm, Weight 5.25kg  The antennas for VHF EAntenna LFA represent the largest development in antennas with moderate boom length...
Read More
£210.95 £175.79
Pre Order
call

Seen this product cheaper elseware?

Call 0345 2300 599
Dimensions 151x10x10cm, Weight 5.25kg  



The antennas for VHF EAntenna LFA represent the largest development in antennas with moderate boom length for a single performance.

This performance is characterized in that:

  • You can listen to very low signals without QRM and QRN noise alters the audio clarity.
  • The food is straightforward to 50 Ohms, which has not lost any respect to lines of adaptation. 
  • The bandwidth covers the entire band with low SWR / SWR.
  • The radiation lobe is wide, so that the signal is not as selective as you turn the minimum antenna.
  • Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
  • The gain is comparable with other models of antennas always larger in dimensions.

This is explained because in EAntenna:

  • Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
  • It takes care of every piece of aluminum, by filing of rough exterior and interior. All this by hand, by qualified and prepared for a final product of extreme quality.
  • All hardware we use is in stainless steel AISI 304
  • The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
  • Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).
Specifications 144LFA9
  • 30x2mm square boom.
  • Elements of 6mm in diameter, except that the LOOP is 13mm and 10mm at the ends.
  • Mast plate of 150x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.

Characteristics of the 144LFA9

  • After trying many models, we were surprised by EAntenna performance 144LFA9. The official station EAntenna ( www.eantenna.es / team ) have one of them fixed, and even with other antennas in the same direction, we noticed that the noise level is much lower. Something that characterizes the LFA antennas, but no other model has come to get.
  • A special lobe, makes it one of the most versatile LFA antennas by weight, because its elements are of 6mm.
  • Simple and quick, because the boom joints are easy to assemble.
  • Antenna very solid construction, and with a very acceptable weight.
  • Available for 2 or 4 units enfasar in a short (under enfasamiento table included), and to make a profit no big antenna can get.

 

SPECIFICATIONSEAntenna 144LFA9
Freq. Range: 144~146 MHz.
Gain: 14,16 dBi
F/B: 24,13 dB
SWR: 1:1.1 ~ 1:1.2
Impedance: 50 Ohm
Max. Power: 5 kW.
Boom length: 4,50 m. / 14,75 '
Wind Survival: ≥ 160kmh / ≥ 100mph
Weight: 5,25 kg / 11,6 pounds

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]