EAntenna 432LFA12 (15,35 dBi ヨ 36,22 dB F/B) - R2010138
SKU Part Number: 17744.12
Dimensions 132X10x10cm, Weight 3.35kg    EAntenna LFA antennas for UHF represent the largest development in antennas with moderate boom...
Read More
£139.96 £116.63
Availability: In stock
call

Seen this product cheaper elseware?

Call 0345 2300 599
Dimensions 132X10x10cm, Weight 3.35kg  
 


EAntenna LFA antennas for UHF represent the largest development in antennas with moderate boom length for a single performance.

This performance is characterized in that:

  • You can listen to very low signals without noise QRM and QRN alter audio clarity.
  • Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. 
  • The bandwidth covers the entire band with low SWR / SWR.
  • The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
  • Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
  • The gain is comparable with other models of antennas always larger in dimensions.

All this is explained because in EAntenna:

  • Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
  • It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.
  • All hardware we use is in stainless steel AISI 304
  • The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
  • Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).
Specifications 432LFA12
  • 30x2mm square boom.
  • 6mm diameter elements except LOOP is 13mm and 10mm at the ends.
  • Mast plate 100x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.

Features of the 432LFA12

  • This antenna has several functions, for beginners in the world of 70 cm. who want to achieve optimal results, for portable operations, by their small sizes, and of course, for people who seek a high gain on a small boom.

    All this in only 235 cm. antenna.

  • A lobe clean and wide, even putting it fixed without rotation, you can speak daily with people in a particular direction and amplitude spectrum much.
  • Simple and quick, because the boom joints are very easy to assemble.
  • Antenna very solid construction, and a very acceptable weight.
  • Available for enfasar 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.
SPECIFICATIONSEAntenna 432LFA12
Frequency Range: 432 ~ 433 MHz
Gain: 15.35 dBi
F / B: 36.22 dB
SWR: 1:1 ~ 1:2
Impedance: 50 Ohm
Maximum Power: 5 kW.
Boom length: 2,35 m. / 7.70 '
Wind Resistance: ≥ 200kmh / 125mph ≥
Weight: 3.35 kg / 7.4 pounds

* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd

** Ratio Gain Front / Back "F / B" (gain when the antenna is rotated 180 ° azimuth direction)

 

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]