EAntenna 432LFA30 (20,45 dBi ヨ 44,32 dB F/B) - R2010120
SKU Part Number: 17744.3
Dimensions 243x10x10cm, Weight 9.4kg   EAntenna LFA antennas for UHF represent the largest development in antennas with moderate boom...
Read More
£264.95 £220.79
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
Dimensions 243x10x10cm, Weight 9.4kg  

 

EAntenna LFA antennas for UHF represent the largest development in antennas with moderate boom length for a single performance.

This performance is characterized in that:

  • You can listen to very low signals without noise QRM and QRN alter audio clarity.
  • Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. 
  • The bandwidth covers the entire band with low SWR / SWR.
  • The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
  • Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
  • The gain is comparable with other models of antennas always larger in dimensions.

All this is explained because in EAntenna:

  • Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
  • It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.
  • All hardware we use is in stainless steel AISI 304
  • The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
  • Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).
Specifications 432LFA30
  • Square boom 40/35/30x2mm telescopic sections.
  • 6mm diameter elements except LOOP is 13mm and 10mm at the ends.
  • Mast plate of 150x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.

Features of the 432LFA30

  • It is undoubtedly the final antenna if looking earnestly in TX signal and receive a greater number of correspondents.
  • Winner of competitions (EA4LU with one 432LFA30, has won the Spanish championship in 2010 and 2011).
  • A very clean lobe, 18.3 dBd gain and exceeding 44 dB F / B antenna makes this dream come true for many.
  • Simple and quick, because the boom joints are very easy to assemble.
  • Antenna very solid construction, and with a moderate weight considering withstand winds.
  • Available for enfasar 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.
SPECIFICATIONSEAntenna 432LFA30
Frequency Range: 432 ~ 433 MHz
Gain: 20.45 dBi
F / B: 44.32 dB
SWR: 1:1 ~ 1:2
Impedance: 50 Ohm.
Maximum Power: 5 kW.
Boom length: 8.25 m. / 27.0 '
Wind Resistance: ≥ 160kmh / 100mph ≥
Weight: 9.4 kg / 20.7 pounds

* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd

** Ratio Gain Front / Back "F / B" (gain when the antenna is rotated 180 ° azimuth direction)

 

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]