Icom IC-7610 - FREE Matching Speaker and Microphone!
SKU Part Number: IC-7610
100W HF / 50MHz SDR Transceiver Icom IC-7610 ...
Read More
£3,199.99
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
100W HF / 50MHz SDR Transceiver

Icom IC-7610

High-performance dual-receiver SDR transceiver with RF direct sampling, 110dB RMDR, dual spectrum scopes, 7-inch touchscreen and built-in automatic antenna tuner.

Free Accessories
Purchase a New IC-7610 and Receive an SP-41 Speaker and SM-30 Microphone FREE

Includes the Icom SP-41 matching speaker, worth £164.95, and the Icom SM-30 desktop microphone, worth £132.

Whether you are dealing with poor band conditions or trying to pick a weak caller out of a large pile-up, receiver performance can make the difference between putting the QSO in the log and having to try again later.

The Icom IC-7610 combines two independent RF direct-sampling receivers with a representative 110dB RMDR, giving DXers and contest operators the performance needed to hear weak signals in the presence of much stronger adjacent stations.

Twin DIGI-SEL preselectors, dual band-pass filter networks and separate A/D converters feed the FPGA, while the large touchscreen, dual spectrum scopes, built-in ATU and extensive station connectivity make the IC-7610 equally capable as the centre of a serious home station.

RECEIVER
Dual Direct Sampling

Two independent RF direct-sampling receivers with separate signal paths.

RMDR
110dB Performance

Excellent ability to recover weak signals alongside powerful adjacent signals.

DISPLAY
7-inch Touchscreen

High-resolution colour display with dual spectrum scope and waterfall operation.

ANTENNA TUNER
Built-In Automatic ATU

Frequency-based tuning memories automatically recall previously stored settings.

RF Direct Sampling

Two Independent High-Performance Receivers

Incoming RF signals are digitised by the A/D converters and immediately processed by the FPGA. By eliminating many of the analogue mixer stages used in conventional superheterodyne designs, RF direct sampling helps reduce unwanted distortion.

The IC-7610 uses two separate DIGI-SEL preselectors, two separate band-pass filter networks and two independent A/D converters, allowing MAIN and SUB to operate as genuinely independent receivers.

Receiver Performance

110dB RMDR

The IC-7610 achieves a representative 110dB RMDR at 2kHz separation, helping the receiver pull weak stations out from beside much stronger signals during busy contest and DX conditions.

DIGI-SEL

MAIN and SUB Preselectors

Independent DIGI-SEL preselectors use sharp RF filtering to help prevent A/D converter overflow from powerful out-of-band signals and reduce higher-order intermodulation products.

Master Clock

Low Phase Noise VCXO

A customised low-phase-noise VCXO is used for the master clock, while a 10MHz reference signal can also be supplied externally when greater frequency precision is required.

Transmitter

Digital Up-Conversion for a Clean Transmitted Signal

Rather than generating the transmit signal by mixing a carrier with a local oscillator, the IC-7610 uses Digital Up-Conversion to generate the required signal through the Digital-to-Analogue Converter, helping provide a clean RF output.

Dual Spectrum Scope

7-inch Colour Touchscreen

The large 7-inch, 800 × 480 touchscreen provides operating information, simulated analogue meters, decoded RTTY and PSK31/63 messages and the IC-7610's high-speed dual spectrum scopes.

MAIN and SUB spectrum displays can be arranged horizontally or vertically, with a 100dB dynamic range and waterfall display making it easier to identify activity and locate weak signals.

Additional Features

Built for Serious HF Operating

  • Independent MAIN and SUB receivers
  • Dual high-speed spectrum scopes and waterfall displays
  • 100dB spectrum scope dynamic range
  • Audio scope with FFT and oscilloscope displays
  • Built-in automatic antenna tuner
  • Emergency tuner function
  • High-quality internal speaker enclosure
  • RTTY and PSK31/63 decoding
  • SD card slot and USB storage support
  • I/Q signal output through USB
  • Ethernet connection for remote operation
  • RS-BA1 remote control support
  • DVI-D external display connection
  • Optional RC-28 remote encoder support
  • Transverter connection
  • Diversity reception
Official Icom Brochure

Want to See More?

Download the official IC-7610 brochure for additional technical information and operating details.

Download the IC-7610 Brochure
Product Information

Icom IC-7610

General Specifications

IC-7610 General

Type HF / 50MHz amateur radio transceiver
Frequency Range TX: 160-10m amateur bands, WARC bands, 137kHz on European version and 50MHz
RX: 0.03-60MHz
Tuning Steps 1Hz / 100Hz, plus 1 / 5 / 9 / 10 / 12.5 / 20 / 25kHz
Frequency Stability ±0.5ppm at 0°C to 50°C
Operating Modes AM, FM, SSB, CW, RTTY, PSK
Memory Channels 99 regular memories plus 2 scan-edge memories, non-volatile storage
Quick Split Offset HF: -100kHz default
50MHz: -500kHz default
Adjustable
Power Supply 13.8V DC ±15%
Current Drain Receive: approx. 3-3.5A
Transmit: maximum 23A
Antenna Impedance 50Ω, with 16.7-150Ω matching range using the internal ATU
Antenna Connectors 2 × SO-239
Dimensions 340 × 118 × 277mm
Weight Approx. 8.5kg
Receiver Architecture

Independent Dual RF Direct-Sampling Receivers

Two independent receiver chains use separate DIGI-SEL preselectors, band-pass filter networks and A/D converters feeding the FPGA. This allows true dual reception together with dual spectrum scopes and diversity reception.

Receiver Section

Receiver Specifications

Receiver System Direct RF-sampling superheterodyne
Intermediate Frequency 12kHz
RMDR 110dB representative value at 2kHz separation
Image Rejection 70dB, excluding ADC aliasing
AF Output 2W into 8Ω at 10% distortion
External Speaker 3.5mm, 4-8Ω
Receiver Sensitivity - General Version

Published figures using P.AMP1 on HF and P.AMP2 on 50MHz where specified.

Mode Frequency Sensitivity
AM 0.1-1.8MHz 6.3µV
AM 1.8-30MHz 2µV
AM 50MHz 1µV
FM 28-29.7MHz 0.5µV
FM 50MHz 0.32µV
SSB / CW 1.8-30MHz 0.16µV
SSB / CW 50MHz 0.13µV
Receiver Sensitivity - European Version
Mode Frequency Sensitivity
AM 1.8-3MHz 16dBµV emf
AM 3-30MHz 6dBµV emf
AM 50MHz 0dBµV emf
FM 28-29.7MHz 0dBµV emf
FM 50MHz -6dBµV emf
SSB 1.8-3MHz 10dBµV emf
SSB 3-30MHz 0dBµV emf
SSB 50MHz -6dBµV emf
Receiver Selectivity
Mode / Filter -6dB -60dB
SSB, 2.4kHz Sharp 2.4kHz 3.6kHz
CW, 500Hz Sharp 500Hz 700Hz
RTTY, 500Hz Sharp 500Hz 700Hz
AM, 6kHz Sharp 6kHz 15kHz
FM, 15kHz Sharp 12kHz 20kHz
Transmitter Section

RF Output & Modulation

SSB PEP 1-100W
CW / RTTY 1-100W
PSK 1-100W
FM 1-100W
AM 1-25W
SSB Modulation PSN modulation
FM Modulation Reactance modulation
AM Modulation Low-power modulation
Maximum FM Deviation ±5kHz
HF Spurious Emissions Better than -40dB out-of-band
50MHz Spurious Emissions Better than -60dB out-of-band
Microphone Impedance 600Ω, 8-pin locking-ring connector
Additional Functions

Operating & Connectivity

  • True dual independent receivers
  • Dual DIGI-SEL preselectors
  • Dual band-pass filter networks
  • Dual spectrum scopes and waterfall displays
  • 100dB spectrum scope dynamic range
  • Diversity reception
  • Audio scope with FFT and oscilloscope
  • 7-inch 800 × 480 touchscreen
  • Digital Up-Conversion transmitter architecture
  • Built-in automatic antenna tuner
  • Emergency tuner function
  • 10MHz external reference input
  • RTTY and PSK decoder
  • Electronic keyer
  • SD card slot
  • USB flash drive support
  • I/Q signal output
  • Ethernet / LAN connection
  • RS-BA1 remote operation support
  • DVI-D external display output
  • Optional RC-28 second VFO control
  • Transverter connection

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.