We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
Icom IC-7300 MK2 HF / 50 / (70) MHz TRANSCEIVER
SKU Part Number:
IC-7300MK2
IC-7300MK2 HF/50/70 MHz Transceiver
The successor to the world-renowned IC-7300, the new IC-7300MK2 builds on a legacy of excellence with enhanced...
Read More
Read More
£1,359.00
Availability: In stock
Seen this product cheaper elsewhere?
Call 0345 2300 599
IC-7300MK2 HF/50/70 MHz Transceiver
The successor to the world-renowned IC-7300, the new IC-7300MK2 builds on a legacy of excellence with enhanced performance and innovative features – setting a new standard for HF operation.
Key Enhancements
- Improved RMDR & Phase Noise – RMDR improved to about 105 dB* typical (at 2 kHz separation). Phase noise reduced by approx. 12 dB (at 1 kHz separation) compared to the previous model.
- Lower Heat & Power Consumption – Reduced RX standby current from 0.9 A to 0.7 A (typical). Optimised for cooler, stable operation during contests and long sessions.
- HDMI™ Port – First time on an Icom HF/50 MHz radio! Connect to an external display for frequency, scope, waterfall, menus and even audio output via HDMI™.
- RX Antenna IN/OUT – Enables external bandpass filters, preamps or alternative RX antennas for optimised reception and reduced QRN.
- Simplified RS-BA1 Remote Control – Operate worldwide via Ethernet with RS-BA1 (Version 2). No base station PC required – power the radio ON/OFF remotely over the Internet.
- Built-in CW Decoder – Decode Morse code signals directly on the radio with automatic tracking and keying speed adjustment.
- USB Type-C™ Connectivity – Dual virtual COM ports + audio I/O. Run digital modes, logging and contest software simultaneously with a single cable.
Other Features
- Supports newly allocated 5 MHz band (Europe version).
- 70 MHz band included in the Europe version.
IC-7300MK2 Highlights
- Improved RMDR and Phase Noise Characteristics
- Lower Heat Generation and Power Consumption
- HDMI™ Port for External Display
- RX Antenna IN/OUT Connectors
- Built-in CW Decoder
- Simplified RS-BA1 Remote Control
- USB Type-C™ with Dual COM + Audio
*RMDR: Reciprocal Mixing Dynamic Range
Improved RMDR and Phase Noise Characteristics
The IC-7300MK2’s RMDR is improved to about 105 dB* typical (at 2 kHz separation) and transmit Phase Noise characteristics are improved by about 12 dB (at 1 kHz frequency separation) compared to the previous model. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals.
Lower Heat Generation and Lower Power Consumption
Through component selection and DC power optimization, the IC-7300MK2 reduces heat generation and enables stable operation during extended operating periods, such as contest operation. Compared to the previous model, the IC-7300MK2 reduces power consumption from 0.9 A to 0.7 A (typical) during RX standby.
HDMI™ Port for an External Display
As a first for Icom’s HF/50 MHz radios, the IC-7300MK2 incorporates an HDMI™ port for external display connection. Operating information, such as frequency, scope, waterfall, and menus, can be shown on a large monitor, and audio can also be output through HDMI™ to the display’s speakers.
RX Antenna IN/OUT Connectors
The RX Antenna IN/OUT connectors enable you to take advantage of antenna characteristics for optimized reception, such as avoiding interference and QRN. External bandpass filters and preamps can also be connected to these connectors.
Simplified RS-BA1 Remote Control
Whether from a remote location within your home QTH, or from a remote location somewhere around the world, the RS-BA1 (Version 2) software enables you to operate your IC-7300MK2. With the addition of an Ethernet connector, a base station computer is not required. You are able to remotely turn the radio ON or OFF through the Internet.
Built-in CW Decoder
Another first for Icom’s HF/50 MHz radio, the IC-7300MK2 can decode Morse code signals without using a PC or other external equipment. The decode filter automatically follows the target signal, and keying speed is automatically adjusted.
USB Type-C™ with Dual COM + Audio
The IC-7300MK2 provides a USB Type-C™ port with dual virtual COM ports and audio In/Output. You can use two applications simultaneously, such as FT8, logging and contest software, with just one USB cable.
Other Features
• Supports newly allocated 5 MHz band (Europe Version)
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]