Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599
mAT-TUNER MAT-Y200 200W Automatic Antenna Tuner for Yaesu Transceivers
Claim £255 Cashback
Buy your Yaesu FTDX101D new from us at full price and you are eligible for £255 cashback directly from Yaesu, subject to their terms.
Offer ends 31 December 2026
Cashback Details & Claim →You pay the full product price to ML&S; cashback is claimed separately from Yaesu after purchase. Eligibility and claim deadlines are subject to Yaesu's terms.
Yaesu FTDX101D
100W HF/50MHz Hybrid SDR Transceiver
Exceptional close-in receiver performance, independent dual reception and advanced Hybrid SDR technology. The FTDX101D brings Yaesu's flagship receiver architecture, precision RF filtering and real-time spectrum visualisation together in an outstanding 100W transceiver.
FREE Yaesu SP-101 Speaker
Receive the matching Yaesu SP-101 external speaker, worth £139.90, completely free with your FTDX101D.
Free accessory available while promotional stocks last. Not part of the standard Yaesu package.
Discover the Yaesu FTDX101 Series
Explore the receiver technology, operating features and performance of Yaesu's flagship FTDX101 family.
Flagship engineering for serious HF operation
Continuing the heritage of Yaesu's celebrated FT-101 series, the FTDX101D was developed around one of the most demanding aspects of amateur radio: hearing a weak signal while much stronger stations are operating close by.
Its Hybrid SDR architecture combines a high-performance narrow-band receiving system with direct-sampling SDR technology for spectrum visualisation. The result is a sophisticated HF/50MHz transceiver designed for demanding DX work, contesting and everyday operation.
The FTDX101D shares much of its fundamental receiver technology with the 200W FTDX101MP. The D version provides 100W output, requires a separate 13.8V DC power supply and features factory-fitted VC-Tune on the MAIN receiver, with optional VC-Tune available for the SUB receiver.
Recognised by Sherwood Engineering
The FTDX101D has achieved a leading position in Sherwood Engineering's widely referenced amateur-radio receiver test data. Its impressive close-in dynamic range makes it particularly attractive to operators who regularly work weak signals on crowded bands.
Sherwood's rankings reflect specific measurements and configurations. Results and positions can change as additional equipment is tested.
View Sherwood Receiver Test Data →Engineered for exceptional HF performance
RF Output
Up to 100W output on supported HF and 50MHz modes, with adjustable transmit power for different operating requirements.
Independent Receivers
MAIN and SUB receiver architecture supports simultaneous reception, dual watch and split-frequency operation.
Precision RF Preselection
Factory-fitted motor-driven RF preselector on the MAIN receiver, with an optional unit available for the SUB receiver.
Colour Touchscreen
Detailed spectrum and waterfall displays with Yaesu's three-dimensional spectrum stream visualisation.
The advantage of Hybrid SDR
The FTDX101D combines two complementary signal-processing systems. A narrow-band SDR receiver delivers demanding signal reception, while a separate direct-sampling SDR system provides detailed, real-time visibility of band activity.
Narrow-Band SDR
A high-performance down-conversion receiver uses crystal roofing filters, low-noise RF circuitry and high-resolution digital signal processing. Strong signals outside the desired receive bandwidth can be attenuated before reaching the analogue-to-digital converter, helping preserve receiver performance in demanding conditions.
Direct-Sampling SDR
A complementary direct-sampling receiver supports the real-time spectrum scope. This gives the operator a detailed visual representation of nearby activity, making it easier to locate stations and identify operating opportunities.
This combination is particularly valuable during contests, DX pile-ups and operation near powerful transmitters, where both strong-signal handling and spectrum awareness are essential.
Outstanding close-in signal handling
Yaesu designed the FTDX101 series for exceptional performance with closely spaced signals. Its 400MHz High Resolution Direct Digital Synthesizer (HRDDS), low-noise oscillator architecture and high-performance RF filtering contribute to excellent strong-signal characteristics.
Reciprocal Mixing Dynamic Range at 2kHz spacing.
Blocking Dynamic Range at 2kHz spacing.
Third-order Intermodulation Dynamic Range at 2kHz spacing.
Manufacturer-published performance figures under Yaesu's specified test conditions. Actual receiver performance depends on configuration, operating frequency and measurement conditions.
VC-Tune. Greater control over interference.
The FTDX101D includes Yaesu's motor-driven VC-Tune RF preselector on its MAIN receiver. This system is designed to improve reception in the presence of strong nearby signals by providing adjustable RF preselection ahead of subsequent receiver stages.
VC-Tune employs a variable capacitor driven by a precision stepping motor. Its resonant frequency can be adjusted to help reject strong interfering signals while maintaining reception of the desired signal. Yaesu specifies maximum attenuation of approximately 70dB under its measurement conditions.
The system is controlled using the front-panel VC-TUNE key and Multi-Purpose VFO Outer Dial. Tuning settings can be retained by band, reducing the need to repeat adjustments when returning to familiar operating conditions.
The MAIN receiver VC-Tune is factory-fitted. A separate VCT-101 unit can be installed to add VC-Tune functionality to the SUB receiver. The 200W FTDX101MP includes both units as standard.
Crystal roofing filters for demanding reception
The FTDX101D incorporates narrow crystal roofing filters as part of its receiver's front-end selectivity system. These filters attenuate unwanted signals before digital processing, helping the receiver maintain performance when strong adjacent signals are present.
| Roofing Filter | MAIN Receiver | SUB Receiver |
|---|---|---|
| 300Hz CW | Optional | Optional |
| 600Hz CW | Standard | Standard |
| 3.0kHz SSB | Standard | Standard |
| 12kHz AM | Standard | Standard |
| 1.2kHz SSB | Optional | Optional |
Optional narrow roofing filters are separately purchased internal accessories and may require specialist installation.
See the band in remarkable detail
The 7-inch, 800 x 480 pixel colour touchscreen offers a detailed operating display while retaining extensive dedicated front-panel controls. Spectrum and waterfall information gives the operator an immediate visual representation of signals across the selected frequency span.
3DSS Spectrum Stream
Yaesu's three-dimensional spectrum visualisation provides an alternative way to observe signal strength and changes in band activity over time.
Real-Time Spectrum Scope
The direct-sampling SDR system produces a live view of nearby signals, supporting rapid identification of operating opportunities.
Dual-Receiver Displays
Configurable display arrangements support MAIN and SUB receiver operation, including dual-band spectrum monitoring.
Purpose-built front-panel controls
The FTDX101D balances modern touchscreen operation with a traditional high-grade radio control layout. Important functions remain accessible directly from the front panel, allowing the operator to make adjustments without navigating multiple menus.
MPVD Outer Dial
The aluminium Multi-Purpose VFO Outer Dial provides adjustment of functions including SUB VFO tuning, VC-Tune, clarifier and user-selectable controls.
Active Band Indicator
Illuminated band-selection controls identify MAIN and SUB receiver assignments and the transmitting VFO at a glance.
Receiver Adjustments
Quick access to WIDTH, SHIFT and RF preselection supports precise tuning in changing band conditions.
Split and Dual Watch
Independent receiver controls make it practical to monitor separate frequencies and manage split-frequency contacts.
100W transmission with exceptional signal purity
The FTDX101D delivers up to 100W RF output on supported HF and 50MHz modes. Its transmitter design places considerable emphasis on low phase noise and maintaining signal quality throughout the transmit chain.
Yaesu's 400MHz HRDDS oscillator architecture supports both receiver and transmitter performance. High-resolution digital signal-generation circuitry, carefully designed conversion stages and a precision RF amplifier help maintain a clean transmitted signal, particularly important on crowded amateur bands.
Standard 13.8V DC station power
Unlike the FTDX101MP, which includes the FPS-101 external mains power supply, the FTDX101D requires a suitable regulated 13.8V DC power supply. The radio draws approximately 23A at maximum 100W transmit output.
Use a quality regulated 13.8V DC supply with sufficient continuous-current capacity for the transceiver's transmitting requirements. Allow adequate ventilation around the radio and follow Yaesu's power-connection instructions.
Remote operation and station integration
The FTDX101 series supports computer-based remote control, allowing compatible software to manage operating functions and monitor receiver information. Remote operation over a LAN or internet connection requires the appropriate optional external LAN equipment and software configuration. This equipment is not included as standard with the FTDX101D.
What's included?
Standard documentation and small accessories are provided according to the supplied UK package. A mains power supply, optional SUB VC-Tune and optional roofing filters are not included. The SP-101 speaker is part of a separate ML&S promotional offer.
Official Yaesu Information
Explore Yaesu's official FTDX101 series information for complete technical details, operating features and manufacturer documentation.
View Manufacturer Information →Yaesu FTDX101D
100W HF/50MHz hybrid SDR transceiver featuring two independent receivers, VC-Tune on the MAIN receiver and a 7-inch colour touchscreen.
General Specifications
| Model | FTDX101D |
|---|---|
| Manufacturer | Yaesu Musen |
| Radio Type | HF/50MHz all-mode hybrid SDR transceiver |
| Receivers | Two independent MAIN and SUB receivers |
| Receive Frequency | 30kHz to 75MHz |
| Transmit Coverage | Amateur HF and 50MHz bands; 70MHz availability depends on UK destination configuration |
| Operating Modes | SSB, CW, AM, FM, RTTY and PSK/data |
| Frequency Stability | ±0.1ppm under specified conditions |
| Antenna Impedance | 50 ohms nominal, tuner off |
| Power Requirement | 13.8V DC ±10% |
| Receive Current | Approximately 4A |
| Transmit Current | Approximately 23A at 100W |
| Operating Temperature | 0 to +50 degrees C |
| Dimensions | 420 x 130 x 322mm (W x H x D, excluding projections) |
| Weight | Approximately 12kg, transceiver only |
Transmitter Specifications
| Maximum RF Output | 100W SSB/CW |
|---|---|
| AM Carrier Output | 50W |
| SSB Modulation | J3E, balanced |
| AM Modulation | A3E |
| FM Modulation | F3E |
| FM Deviation | ±5kHz or ±2.5kHz narrow |
| Microphone Impedance | 600 ohms nominal |
| Carrier Suppression | 60dB or better |
| Unwanted Sideband Suppression | 69dB or better |
Receiver Architecture and Performance
| Receiver Architecture | Narrow-band SDR with direct-sampling SDR spectrum display |
|---|---|
| Conversion | Double superheterodyne |
| MAIN First IF | 9.0005MHz |
| SUB First IF | 8.9000MHz |
| Second IF | 24kHz |
| Signal Processing | 18-bit A/D conversion and FPGA-based DSP |
| Local Oscillator | 400MHz HRDDS |
| RMDR at 2kHz | 123dB or greater, Yaesu published figure |
| BDR at 2kHz | 150dB or greater, Yaesu published figure |
| 3rd IMDR at 2kHz | 110dB or greater, Yaesu published figure |
| Phase Noise | Approximately -150dBc/Hz at 2kHz separation |
| VC-Tune MAIN | Factory-fitted |
| VC-Tune SUB | Optional VCT-101 |
Crystal Roofing Filters
| Bandwidth | MAIN Receiver | SUB Receiver |
|---|---|---|
| 300Hz CW | Optional XF-128CN | Optional XF-129CN |
| 600Hz CW | Standard | Standard |
| 1.2kHz SSB | Optional XF-128SN | Optional XF-129SN |
| 3.0kHz SSB | Standard | Standard |
| 12kHz AM | Standard | Standard |
Display and Operating Controls
| Display | 7-inch TFT colour touchscreen |
|---|---|
| Resolution | 800 x 480 pixels |
| Spectrum Scope | Real-time spectrum and waterfall |
| 3D Visualisation | 3DSS |
| Band Selection | Active Band Indicator keys |
| Additional Tuning | Multi-Purpose VFO Outer Dial |
| Dual Receive | Independent MAIN/SUB receivers |
| Remote Operation | Supported with compatible software and optional LAN equipment |
Standard Supplied Equipment
| Transceiver | FTDX101D |
|---|---|
| Hand Microphone | SSM-75G |
| DC Power Cable | Included |
| Spare Fuses | Included |
| Connector Accessories | 2 x RCA plugs; 3.5mm and 6.3mm jack plugs |
| Documentation | Operating manual and standard manufacturer documentation |
| Power Supply | Not included; suitable 13.8V supply required |
Additional ML&S Promotional Accessory
Yaesu SP-101 external speaker supplied free with qualifying FTDX101D purchases while promotional stocks last. This is an ML&S offer and is not part of the standard manufacturer's package.
Installation and Configuration
Power: Use a suitable regulated 13.8V DC power supply with sufficient continuous-current capacity for the radio's maximum specified transmitting current.
Ventilation: Ensure adequate airflow around the radio during high-power or prolonged operation.
Receiver upgrades: Optional VCT-101 SUB receiver preselection and narrow roofing filters require appropriate installation. Consult ML&S before ordering internal upgrades.
70MHz: The UK manufacturer specification references 70MHz operation. Actual transmit availability is dependent on the supplied destination configuration and applicable licence authorisation.
Manufacturer Documentation
Refer to Yaesu's official FTDX101 series documentation for full operating instructions, configuration options and specification details.
View Official Yaesu Specifications →Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]