Icom IC-7100 - FREE HM-151 Microphone and Mount!
SKU Part Number: IC-7100
Exclusive Offer! Now, with every order of the Icom IC-7100, receive a FREE Icom HM-151 Full Keypad Mic worth £54 and a MyDEL Suction...
Read More
£1,274.95 £1,062.46
Availability: In stock
call

Seen this product cheaper elseware?

Call 0345 2300 599

Exclusive Offer!

Now, with every order of the Icom IC-7100, receive a FREE Icom HM-151 Full Keypad Mic worth £54 and a MyDEL Suction Mount worth £13.

IC-7100 HF/VHF/UHF Transceiver

In 1995, almost two decades ago, Icom changed the way radio hams thought about mobile HF communication with the introduction of the IC-706. Since that time, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. Now, at the 2012 Tokyo Hamfair, Icom has once again changed mobile HF communications with the introduction of the IC-7100.

70MHz Band in European Versions

A first for an Icom transceiver, the IC-7100 is designed to the 70MHz band in European versions where now, 70MHz is open to Amateur radio enthusiasts.

Touch Screen Control Portal

An amateur radio first! The radio control head features a large, multi-function, "touch screen" DOT-Matrix LCD display that is positioned for easy view and operation. This is an important feature as the controller display not only provides information, but is your control portal to the IC-7100's feature settings and menus.

Control Head

Breaking the concept that a radio panel should be flat, the IC-7100's control head is designed for an optimal view angle for the LCD as well as the spacing for large fingers, and plenty of room to have a large internal speaker along with a CW keyjack, phone/speaker, microphone, and control cable.

D-STAR READY

The IC-7100 provides D-STAR DV mode digital voice and low speed data communication.

IF DSP Features

The latest 32-bit floating point DSP supports many digital processing features such as digital IF filter, twin PBT, manual notch filters. Of course, those highgrade digital processing features work on all ham bands, from HF to the 70cm band.

Other Features

  • Built-in SD Card Slot for voice storage and data cloning
  • Dual DSP chips deliver versatile digital processing performance
  • Built-in RTTY demodulator and decoder
  • Multi-function meter
  • SWR graphic display
  • DSP controller RF speech compressor
  • Total of 505 memory channels
  • Voice recording and playback functions
  • 70-70.5MHz coverage, 50W output power (for Europe versions only, varies according to version.)
  • 0.5ppm high frequency stability
  • Optional RS-BA1 IP control remote control software

Supplied Accessories

  • Hand microphone
  • DC power cable
  • Electronic keyer plug
  • Spare fuses
  • Key plug
  • ACC cable
  • Separation cable

To download the most up to date cloning/programming files of Icom D-STAR radios and data files of UK D-STAR repeaters and reflectors visit: Icom D-STAR Downloads.

IC-7100 Specification

  • Intuitive Touch Screen Interface
  • Innovative Slant Top Controller
  • HF/6M/4M/2M/70cm & 70MHz
  • D-STAR DV Mode Operation
  • IF DSP Digital Processing
  • Built-in Speaker
  • Mounting Base Option
  • Built-in SD card slot for voice storage and data cloning
  • Built-in RTTY demodulator and decoder
  • Multi-function meter
  • SWR graphic display
  • DSP controller RF speech compressor
  • Total of 505 memory channels
  • Voice recording and playback functions
  • ±0.5ppm high frequency stability
  • Optional RS-BA1 IP control remote control

The Icom IC-7100 is an innovative multiband transceiver that offers many exciting features including touch screen control and a first for an Icom rig...the addition of the 70 MHz band. To maintain its commitment to D-STAR, all versions of the IC-7100 will come with standard D-STAR DV mode.

This video shows the simplicity of touch-screen operation to control various settings in base operation.

Exclusive Offer!

Now, with every order of the Icom IC-7100, receive a FREE Icom HM-151 Full Keypad Mic worth £54 and a MyDEL Suction Mount worth £13.

IC-7100 HF/VHF/UHF Transceiver

In 1995, almost two decades ago, Icom changed the way radio hams thought about mobile HF communication with the introduction of the IC-706. Since that time, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. Now, at the 2012 Tokyo Hamfair, Icom has once again changed mobile HF communications with the introduction of the IC-7100.

70MHz Band in European Versions

A first for an Icom transceiver, the IC-7100 is designed to the 70MHz band in European versions where now, 70MHz is open to Amateur radio enthusiasts.

Touch Screen Control Portal

An amateur radio first! The radio control head features a large, multi-function, "touch screen" DOT-Matrix LCD display that is positioned for easy view and operation. This is an important feature as the controller display not only provides information, but is your control portal to the IC-7100's feature settings and menus.

Control Head

Breaking the concept that a radio panel should be flat, the IC-7100's control head is designed for an optimal view angle for the LCD as well as the spacing for large fingers, and plenty of room to have a large internal speaker along with a CW keyjack, phone/speaker, microphone, and control cable.

D-STAR READY

The IC-7100 provides D-STAR DV mode digital voice and low speed data communication.

IF DSP Features

The latest 32-bit floating point DSP supports many digital processing features such as digital IF filter, twin PBT, manual notch filters. Of course, those highgrade digital processing features work on all ham bands, from HF to the 70cm band.

Other Features

  • Built-in SD Card Slot for voice storage and data cloning
  • Dual DSP chips deliver versatile digital processing performance
  • Built-in RTTY demodulator and decoder
  • Multi-function meter
  • SWR graphic display
  • DSP controller RF speech compressor
  • Total of 505 memory channels
  • Voice recording and playback functions
  • 70-70.5MHz coverage, 50W output power (for Europe versions only, varies according to version.)
  • 0.5ppm high frequency stability
  • Optional RS-BA1 IP control remote control software

Supplied Accessories

  • Hand microphone
  • DC power cable
  • Electronic keyer plug
  • Spare fuses
  • Key plug
  • ACC cable
  • Separation cable

To download the most up to date cloning/programming files of Icom D-STAR radios and data files of UK D-STAR repeaters and reflectors visit: Icom D-STAR Downloads.

IC-7100 Specification

  • Intuitive Touch Screen Interface
  • Innovative Slant Top Controller
  • HF/6M/4M/2M/70cm & 70MHz
  • D-STAR DV Mode Operation
  • IF DSP Digital Processing
  • Built-in Speaker
  • Mounting Base Option
  • Built-in SD card slot for voice storage and data cloning
  • Built-in RTTY demodulator and decoder
  • Multi-function meter
  • SWR graphic display
  • DSP controller RF speech compressor
  • Total of 505 memory channels
  • Voice recording and playback functions
  • ±0.5ppm high frequency stability
  • Optional RS-BA1 IP control remote control

The Icom IC-7100 is an innovative multiband transceiver that offers many exciting features including touch screen control and a first for an Icom rig...the addition of the 70 MHz band. To maintain its commitment to D-STAR, all versions of the IC-7100 will come with standard D-STAR DV mode.

This video shows the simplicity of touch-screen operation to control various settings in base operation.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]