Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599OM Power OM-2002W
A high-power 144MHz VHF solid-state linear amplifier using two MRF1K8 LDMOS devices, with liquid cooling, touchscreen monitoring, LAN remote control and comprehensive protection.
LDMOS Power for Serious VHF Stations
The OM Power OM-2002W is a dedicated high-power amplifier for the 144MHz amateur band. OM Power specifies RF coverage from 144 to 148MHz, encompassing the UK amateur allocation of 144 to 146MHz.
Unlike OM Power's high-power HF valve amplifiers, the OM-2002W uses a fully solid-state RF stage built around two MRF1K8 LDMOS devices, requiring only around 25 to 30W of drive for full output.
Two MRF1K8 Power Transistors
The OM-2002W uses two MRF1K8 LDMOS devices to produce up to 1.8kW in CW and SSB, with up to 1.6kW specified for AM, FM and digital modes.
With approximately 19dB of gain, full output requires only around 25 to 30W of RF drive, making the amplifier suitable for pairing with a wide range of 2m multimode transceivers.
Designed to Move Serious Heat
OM Power describes the OM-2002W as liquid cooled, providing an effective means of removing heat from the high-output LDMOS power stage during demanding VHF operation.
The cooling system also incorporates two axial blowers, combining liquid heat transfer with forced airflow to manage the thermal load generated at high RF output.
Built for Every Common 2m Mode
Up to 1,800W
Maximum manufacturer-rated output for SSB and CW operation.
Up to 1,600W
Manufacturer-rated output for AM, FM and digital-mode operation.
50% Duty Cycle
OM Power specifies the OM-2002W for 50% duty-cycle operation at its stated power levels. Cooling airflow and installation clearances should therefore be treated as an important part of the station design.
25-30W for Full Output
The amplifier provides approximately 19dB power gain, requiring around 25 to 30W of drive for full rated output.
Input impedance is 50 ohms, with input VSWR specified at better than 1.1:1, presenting the connected transceiver with a well-matched RF load.
Clean High-Power VHF Output
OM Power specifies intermodulation distortion of approximately -32dBc.
Harmonic suppression is specified at better than -70dBc, an important consideration when operating a high-power amplifier on the 2m band.
Automatic Reflected-Power Protection
Maximum specified output SWR is 2:1. If reflected power reaches approximately 200W or more, the amplifier automatically switches to STBY.
At this power level, coaxial cable, connectors, relays, antenna switches and antennas must all be suitable for high-power VHF operation.
Constant Monitoring of the RF Stage
The OM-2002W continuously monitors the operating conditions of its high-power LDMOS stage and automatically protects the amplifier when parameters move outside their permitted range.
Protection includes excessive SWR, drain current, input overdrive, excessive output power, reflected power, low gain, combiner imbalance, low DC voltage and excessive temperature.
Monitor and Control the Amplifier Remotely
The OM-2002W incorporates a Lantronix XPORT network interface and can be monitored and controlled using OM Power's dedicated remote-control software.
Factory network settings are 192.168.1.233 with subnet mask 255.255.255.0 and gateway 192.168.1.1. OM Power recommends securing the XPORT web interface after installation.
120-250V AC, 50-60Hz
The OM-2002W's internal supply accepts mains input from 120 to 250V AC at 50-60Hz, providing considerably greater installation flexibility than many traditional high-power valve amplifiers.
Use Within Your Licence Conditions
The OM-2002W is capable of substantially more RF output than is permitted under a UK amateur-radio licence. UK operators must set and use the amplifier within the power limits and other conditions of their licence.
OM-2002W Downloads
OM Power provides technical documentation and dedicated remote-control software for the OM-2002W through its official download resources.
View OM Power DownloadsOM Power OM-2002W
Liquid-cooled solid-state 144MHz VHF linear amplifier using two MRF1K8 LDMOS devices, with 1.8kW SSB/CW output, LAN control and comprehensive protection.
| Amplifier Type | Solid-state 144MHz VHF linear amplifier |
| Manufacturer Frequency Coverage | 144-148MHz |
| UK 2m Amateur Allocation | 144-146MHz |
| CW / SSB Output | 1,800W |
| AM / FM / Digital Output | 1,600W |
| Duty Cycle | 50% |
| Drive Power | 25-30W |
| Power Gain | 19dB |
| Input Impedance | 50 ohms |
| Input VSWR | Better than 1.1:1 |
| Maximum Output SWR | 2:1 |
| SWR Protection | Automatic STBY at approximately 200W reflected power or higher |
| Intermodulation Distortion | Approximately -32dBc |
| Harmonic Suppression | Better than -70dBc |
RF Stage & Cooling
| RF Devices | 2 × MRF1K8 LDMOS |
| Primary Cooling | Liquid-cooled RF stage |
| Air Cooling | 2 × axial blower |
Protection Circuits
| Power Supply | Internal wide-range mains power supply |
| Mains Input | 120-250V AC, 50-60Hz |
| Display | 4.3in colour touchscreen, 480 × 272 pixels |
| Remote Control | LAN remote control and monitoring using OM Power software |
LAN Configuration
| Network Interface | Lantronix XPORT XP1001000-05R |
| Factory IP Address | 192.168.1.233 |
| Factory Subnet Mask | 255.255.255.0 |
| Factory Gateway | 192.168.1.1 |
| Required LAN Ports | 9999 and 10001 for OM Power remote-control software |
| Dimensions | 383 × 180 × 365mm, width × height × depth |
| Approx. Weight | 11.7kg |
Manufacturer Documentation
Access OM Power documentation and remote-control software for the OM-2002W through the manufacturer's download resources.
View OM Power DownloadsDelivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.
