Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599OM Power OM2000+
A high-power HF and 50MHz ceramic-tetrode linear amplifier delivering more than 2kW on HF and up to 1.5kW on 6m, with full QSK, three-way antenna switching, comprehensive protection and direct manual tuning.
One Amplifier from 160m through 6m
The OM Power OM2000+ is designed for the amateur bands from 1.8 to 29.7MHz, including WARC allocations, together with the 50MHz amateur band.
It combines a single FU-728F ceramic tetrode with a substantial 3kVA power supply, full QSK, three-way antenna switching and a comprehensive monitoring and protection system.
More Than 2kW from a Single Tube
At the heart of the OM2000+ is a single FU-728F ceramic tetrode, producing more than 2kW in SSB and CW on the HF amateur bands.
On 50MHz the amplifier is rated for up to 1.5kW in SSB and CW, while RTTY output is specified at 1.5kW.
Direct Control of the RF Output Stage
The OM2000+ is a manual-tune amplifier. The operator sets the amplifier correctly for the selected frequency and antenna load using the front-panel tuning controls.
This gives experienced operators direct control of the tuned RF stage while OM Power's electronic monitoring protects the amplifier against mistuning and abnormal operating conditions.
Amplifier Tuning Is Not an Antenna Tuner
The OM2000+'s tuning controls adjust the amplifier's own output network. They do not replace an external antenna matching unit, so the antenna system, feeder, switches and connectors must present a suitable load and be correctly rated for the RF power being used.
Full Output from Around 40-60W Drive
OM Power specifies approximately 15dB power gain, with around 40 to 60W of RF drive normally required for full output depending on frequency, tuning and load conditions.
Three Antenna Outputs
A built-in three-way antenna switch allows several antennas to remain connected to the amplifier, reducing the need for an additional high-power external antenna switch in many stations.
Clean Output from HF through 6m
Intermodulation distortion is specified at approximately -32dBc below nominal output.
Harmonic suppression is specified at better than -50dBc, improving to better than -70dBc from 30 to 54MHz.
Automatic Reflected-Power Protection
Maximum specified output SWR is 2:1. If reflected power reaches approximately 250W or higher, the amplifier automatically switches to STBY.
Input impedance is 50 ohms, with input VSWR specified below 1.5:1.
Protecting the Tube, Power Supply and Station
Protection systems monitor SWR, anode current, screen current, grid current, PA tuning and amplifier temperature.
Soft-start circuitry reduces mains inrush stress and a safety interlock prevents normal switch-on while the amplifier cabinet is open. Fault and warning information is retained to simplify maintenance and diagnosis.
Digital Status with Analogue RF Metering
The front panel combines an OLED character display with a traditional dual-system analogue meter for forward and reflected RF power. Separate LEDs provide clear ON, STBY, FAULT and ON AIR status indication.
Automatic Bias Setup
The OM2000+ can automatically establish the required anode-current bias following tube replacement, removing the need for a separate manual bias-adjustment procedure.
3kVA Toroidal Transformer
The amplifier uses a substantial 3kVA toroidal mains transformer with switchable 220, 230 and 240V primary settings for 50/60Hz operation.
Installation must provide an electrical supply suitable for the amplifier's high mains demand and comply with OM Power's instructions and applicable electrical regulations.
Use Within Your Licence Conditions
The OM2000+'s maximum RF capability may exceed the transmit power permitted by an operator's amateur-radio licence. Output power must always be set and operated within applicable licence conditions and local regulations.
OM2000+ Downloads
OM Power provides current OM2000+ user manuals and supporting documentation through its official download centre.
View OM Power DownloadsOM Power OM2000+
Manual-tune HF and 50MHz linear amplifier using one FU-728F ceramic tetrode, with 2kW+ HF output, 1.5kW 6m output, full QSK and integrated three-way antenna switching.
| Amplifier Type | Manual-tune ceramic-tetrode HF and 50MHz linear amplifier |
| Frequency Coverage | Amateur bands 1.8-29.7MHz including WARC bands, plus 50MHz |
| HF SSB / CW Output | 2,000W+ |
| 50MHz SSB / CW Output | 1,500W |
| RTTY Output | 1,500W |
| Typical Drive Power | 40-60W for full output |
| Power Gain | 15dB |
| Input Impedance | 50 ohms |
| Input VSWR | Less than 1.5:1 |
| Output Impedance | 50 ohms unbalanced |
| Maximum Output SWR | 2:1 |
| SWR Protection | Automatic STBY when reflected power reaches 250W or higher |
| Intermodulation Distortion | Approximately -32dBc below nominal output |
| Harmonic Suppression | Better than -50dBc |
| Harmonic Suppression, 30-54MHz | Better than -70dBc |
RF Power Stage
| Tube | 1 × FU-728F ceramic tetrode |
| PA Tuning | Manual |
| Automatic Bias Setup | Supported following tube replacement |
| Antenna Switch | Integrated 3-way antenna switch |
| QSK | Full break-in using silent vacuum relay |
Protection & Monitoring
| Digital Display | OLED character display |
| RF Meter | Dual-system analogue meter for forward and reflected power |
| Status Indicators | ON, STBY, FAULT and ON AIR |
| Fault Memory | Stored warning and fault information for maintenance and diagnosis |
| Mains Supply | Switchable 220 / 230 / 240V AC, 50/60Hz |
| Transformer | 1 × 3kVA toroidal transformer |
| Cooling | Temperature-controlled two-speed centrifugal blower plus axial blower |
| Dimensions | 390 × 195 × 370mm, width × height × depth |
| Approx. Weight | 24kg |
Manufacturer Documentation
Download the current OM2000+ user manual and supporting documentation directly from OM Power.
View OM Power DownloadsDelivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.

