Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599Would You Like a Custom Control Cable Made?
Select your radio manufacturer and model below, then click the button to send our team the details of your station.
OM Power OM4001A
A fully automatic dual-FU728F ceramic-tetrode HF linear amplifier delivering more than 4kW in SSB and CW, with automatic band switching, frequency-aware PA tuning, CAT integration, LAN remote control and comprehensive protection.
A 4kW-Class Valve Amplifier That Follows the Radio
The OM Power OM4001A combines the RF performance of a high-power ceramic-tetrode amplifier with automatic control normally associated with modern solid-state designs.
Once configured for the station, CAT, CI-V, band-data or RF-sensing information can be used to select the correct band and stored tuning condition automatically as the operator changes frequency.
Two FU728F Power Tubes
The OM4001A uses two FU728F ceramic tetrodes to deliver more than 4kW output in SSB and CW, with 3kW specified for RTTY and digital modes.
Automatic bias setup simplifies servicing following tube replacement, with the amplifier able to establish the required anode-current bias automatically.
Frequency-Aware Tuning by Band Segment
Rather than requiring the operator to manually adjust TUNE and LOAD controls whenever frequency is changed, the OM4001A stores and recalls amplifier tuning conditions according to the selected band and frequency segment.
OM Power specifies a response time of less than 0.5 seconds when moving within the same band and less than 2 seconds when changing band.
Automatic Amplifier Tuning, Not an Antenna Tuner
The automatic tuning system adjusts the amplifier's own tuned RF output network. It is not a wide-range antenna matching unit, so the antenna system, feeder and switching equipment must still present a suitable load and be rated for the RF power being used.
CAT, CI-V, Band Data or RF Sensing
OM Power provides direct integration with Icom, Yaesu, Kenwood, Elecraft, Ten-Tec Orion, FlexRadio 6xxx and Apache Labs ANAN equipment, together with Icom CI-V data supplied through compatible microHAM devices.
For transceivers without suitable CAT data, RF-sensitive band and frequency detection allows the OM4001A to provide automatic band switching without requiring a digital radio interface.
Full Output from Around 40-60W Drive
With approximately 17dB power gain, the OM4001A normally requires only around 40 to 60W of transceiver drive to achieve full rated output, depending on frequency, tuning and load conditions.
High-Power Output with Controlled Distortion
OM Power specifies intermodulation distortion at approximately -32dB below nominal output, with harmonic suppression better than -50dBc.
Input impedance is 50 ohms with input VSWR below 1.5:1, while the output connection is an unbalanced 50-ohm system.
Automatic SWR Protection
Maximum specified output SWR is 3:1. If reflected power reaches approximately 350W or higher, the amplifier automatically switches to STBY to protect the RF stage.
At this level of RF power, antennas, feeders, connectors, switches, filters and other accessories must all be rated appropriately for the intended operating power.
Monitoring the Entire Power Amplifier
The OM4001A monitors SWR, anode current and voltage, screen current and voltage, grid current and voltage, heater voltage, amplifier tuning and operating temperature.
A soft-start system reduces mains inrush stress, while a safety interlock prevents normal switch-on with the amplifier opened. Faults and warnings are stored in memory to simplify diagnosis and servicing.
Three Programmable Axial-Blower Modes
Axial blower behaviour can be configured according to operating requirements, allowing cooling performance to be tailored to the expected workload.
Remote Control over the Network
The OM4001A incorporates a Lantronix XPORT network interface for remote monitoring and operation using OM Power's Windows remote-control software.
The factory network configuration can be changed through the XPORT web interface. OM Power recommends securing the interface with a username and password after installation.
Dual 3kVA Toroidal Transformers
The OM4001A uses two 3kVA toroidal mains transformers. OM Power specifies switchable primary settings of 220/230/240V at 50Hz or 230/240/250V at 60Hz, with other primary-voltage arrangements available for certain markets.
A 4kW-class amplifier places substantial demands on the mains supply. Installation must be suitable for the amplifier and carried out in accordance with OM Power's instructions and applicable electrical regulations.
Use Within Your Licence Conditions
The OM4001A's maximum RF capability may exceed the transmit power permitted by an operator's amateur-radio licence. Output power must always be set and operated within the applicable licence conditions and local regulations.
OM4001A Downloads
OM Power provides the OM4001A instruction manual, automatic-tuning documentation, firmware updates, firmware loader and Windows remote-control software through its official download centre.
View OM Power DownloadsOM Power OM4001A
Fully automatic HF linear amplifier using two FU728F ceramic tetrodes, with CAT and RF-sensed band control, automatic PA tuning, LAN remote control and comprehensive protection.
| Amplifier Type | Fully automatic ceramic-tetrode HF linear amplifier |
| Frequency Coverage | Amateur bands from 1.8 to 29.7MHz including WARC bands |
| SSB / CW Output | 4,000W+ |
| RTTY / Digital Output | 3,000W |
| Typical Drive Power | Approximately 40-60W for full output |
| Power Gain | 17dB |
| Input Impedance | 50 ohms |
| Input VSWR | Less than 1.5:1 |
| Output Impedance | 50 ohms unbalanced |
| Maximum Output SWR | 3:1 |
| SWR Protection | Automatic STBY when reflected power reaches 350W or higher |
| Intermodulation Distortion | -32dB below nominal output |
| Harmonic Suppression | Better than -50dBc |
RF Power Stage & Automatic Tuning
| Power Tubes | 2 × FU728F ceramic tetrode |
| Automatic Tuning | Automatic band and frequency-segment PA tuning |
| Same-Band Response | Less than 0.5 seconds |
| Band-Change Response | Less than 2 seconds |
| Automatic Bias | Automatic anode-current bias setup following tube replacement |
| Automatic Radio Control | CAT, Icom CI-V, Yaesu-compatible band data and RF frequency sensing |
| Supported Manufacturers | Icom, Yaesu, Kenwood, Elecraft, Ten-Tec Orion, FlexRadio 6xxx and Apache Labs ANAN |
| microHAM Compatibility | Icom transceive / CI-V output from compatible microHAM interfaces |
| RF Sensing | Automatic band and frequency detection where CAT data is unavailable |
| Band-Pass Filter Control | Yaesu-compatible BCD BAND DATA output |
| External Antenna Control | BCD control for up to 10 antenna positions |
| QSK | Full break-in operation |
Protection & Monitoring
| Power Supply | High-voltage mains supply using two 3kVA toroidal transformers |
| 50Hz Primary Settings | 220 / 230 / 240V |
| 60Hz Primary Settings | 230 / 240 / 250V |
| Transformers | 2 × 3kVA toroidal transformers |
| Cooling | Centrifugal blower plus axial blower |
LAN Remote Control
| Network Interface | Lantronix XPORT XP1001000-05R |
| Factory IP Address | 192.168.1.222 |
| Factory Subnet Mask | 255.255.255.0 |
| Factory Gateway | 192.168.1.1 |
| Remote Software Ports | LAN ports 9999 and 10001 must be accessible for OM Power remote-control software |
| Display | 4.3in colour touchscreen |
| Dimensions | 485 × 200 × 455mm, width × height × depth |
| Approx. Weight | 46kg |
| Fault Memory | Fault and warning history stored for maintenance and diagnosis |
| Axial Blower Control | Three programmable operating modes |
Manufacturer Documentation
Download the current OM4001A manual, automatic-tuning instructions, remote-control software, firmware loader and firmware releases directly from OM Power.
View OM Power DownloadsDelivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.

