Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599The ACOM 1400S is a state-of-the-art amplifier covering all amateur bands from 1.8 to 54 MHz. It comes with a new compact Touch-Screen Remote Control Unit. The proven ACOM 06AT tuner is the optimal option for use with ACOM 1400S. Both devices share the same front panel design and will look magnificent in your shack.
ACOM 1400S amplifier is based on the latest LDMOS transistor technology. The final PA stage uses a rugged 65 V LDMOS transistor for heavy operation modes. The amplifier as standard is equipped with an Ethernet interface and thus can be remotely controlled via the Internet through the integrated Web interface.
Usage
The ACOM 1400S is a state-of-the-art linear power amplifier that covers all amateur bands from 1.8 through 54 MHz and provides 1200 W output power (PEP or continuous carrier). The amplifier operating information is shown on a separate Remote Control Unit (RCU) equipped with a touch screen.
Easy to operate
The overall operation of ACOM 1400S is extremely simplified: the touch screen menus on the RCU are intuitive and easy to follow, and no special skill is required from the operator when changing frequency bands.
User-friendly automatic control
When connected to a transceiver with CAT capability, the amplifier will track the operating frequency and will change bands accordingly. Even if not CAT-connected, the amplifier monitors the input signal frequency through the built-in frequency counter and automatically switches bands.
High-resolution colour touch display
Amplifier status indications are explained via detailed text displayed on the RCU 7" high-resolution color touch display. All indicators and controls (except the primary mains switch and power indicator) are accessible via the RCU's touch screen, as well as all command input to the RCU is menu-driven,
Transceiver-independent
Compatible with all transceiver models - does not need any special signals: "ground on transmit" and less than 50 W of RF drive power is sufficient.
Remote control capabilities
Remotely controlled via the Internet through an integrated Web interface and Ethernet RJ45 port.
LDMOS transistor technology
The final PA stage uses a rugged 65 V LDMOS transistor for heavy operation modes.
Broadband input circuit
Broadband input circuit, providing a perfect transceiver load with SWR below 1.2 (typically 1.1), without retuning throughout the whole frequency range from 1.8 to 54 MHz.
Intelligence
Takes care of itself during operation via continuously working protection circuits in all modes. The operator can monitor many parameters of the amplifier while it is in operation.
Easy maintenance
Detailed data (55 parameters) about each of the last 28 hard-fault protection trips is stored in the amplifier's memory.
Compact construction
Extremely compact construction with built-in switching-mode power supply (SMPS) that operates with an extended mains voltage range of 900-264 VAC, with no internal switchover. The consumed current is purely sinusoidal, Power Factor Corrected (PFC) and inrush current limited. This makes the operation of unstable mains and generators easy and trouble-free.
Electromagnetic compatibility
Perfect electromagnetic compatibility (EMC) with both highly sensitive devices and the powerful devices in the radio station (receivers, computers, other amplifiers) exceeds the standard EMC requirements due to the used PFC and built-in radio-frequency filters.
ACOM 1400S amplifier is based on the latest LDMOS transistor technology. The final PA stage uses a rugged 65 V LDMOS transistor for heavy operation modes. The amplifier as standard is equipped with an Ethernet interface and thus can be remotely controlled via the Internet through the integrated Web interface.
Standard Frequency Coverage
- All amateur bands from 1.8 through 54 MHz:
- 1.800 - 2.000 MHz (160 m band)
- 3.500 - 4.000 MHz (80 m band)
- 5.020 - 5.455 MHz (60 m band)*
- 7.000 - 7.300 MHz (40 m band)
- 10.100 - 10.150 MHz (30 m band)
- 14.000 - 14.350 MHz (20 m band)
- 18.068 - 18.168 MHz (17 m band)
- 21.000 - 21.450 MHz (15 m band)
- 24.890 - 24.990 MHz (12 m band)
- 28.000 - 29.700 MHz (10 m band)
- 50.000 - 54.000 MHz (6 m band)*
- (*) Please, refer the applicable regional band plans and laws for specific allocations and limitations;
- In specific business cases, extensions or changes of the frequency coverage can be discussed, but this must be agreed upon before ordering. In any case, this is not the producer's obligation and can not be against local rules and laws.
Rated Output Power
- 1200 W ±0.5 dB, PEP or continuous carrier, without mode limitation, at 200-264 VAC mains;
- 600 W if operated at 90-132 VAC mains.
Intermodulation Distortion (IM3)
- Better than 31 dB below rated PEP;
Harmonic and Parasitic Emissions Output Suppression
- -60 / -70 dB or less (HF/50 MHz band);
Input and Output Impedances
- Nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors;
- Input circuit: Broadband, SWR below 1.2 (1.1 typically), 1.8-54 MHz continuous range without retuning or switching;
- RF bypass path: SWR - below 1.1, 1.8-54 MHz;
- Acceptable SWR at the output load (the antenna): up to 3 with proportional power reduction and up to 1.5 for full output power;
RF Power Gain
- 14 dB ±1 dB (typically 50 W for 1200 W output power);
Mains Power Supply Voltage
- 100-240 VAC, ±10%, 50-60 Hz, Single phase;
Mains Power Consumption at Full Output Power
- Power factor of 0.95 or higher;
- Up to 3100 VA at rated output (200 VAC);
- Up to 2000 VA at 600 W output from 100/120 VAC;
Mains Power Consumption in Low Energy (Waiting) Mode
- Less than 1 VA;
Receive / Transmit Control
- KEY-IN - Phono RCA connector
- Voltage applied to the transceiver keying output - up to +12 V;
- Closed-circuit current flow to the transceiver keying output - up to 6 mA;
- KEY-OUT - open-drain Phono RCA connector
- Output resistance: not more than 120 Ohm;
- The maximum allowable open-circuit voltage coming from external devices connection: +50 V;
- Maximum allowable closed-circuit current flow by external devices: 20 mA;
- Minimum required time of sequencing between sending a request for transmitting (KEY-IN "ground on transmit" signal) and applying RF drive power at RF INPUT connector for safely switching receive to transmit: 10 ms.
Safety and Electromagnetic Compatibility
- Complies with CE safety and electromagnetic compatibility requirements;
- The FCC (US Federal Communications Commission) certification is in process of organization as of October 2024;
Size & Weight (operating, excluding connected cables)
- Amplifier, WxDxH: 372x418x170 mm, 14,6 kg (14.7x16.5x6.7 inches, 32.2 lbs.);
- Remote Control Unit, WxDxH: 179x118x86 mm, 0.730 kg (7.1x4.7x3.4 inches, 1.6 lbs.);
Shipping Size & Weight
- Please, contact us for shipment details;
Operating environments
- Temperature range: -10 to +40 degrees Celsius (14 degrees F to 104 degrees F);
- Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
- Height above sea level: up to 3050 m (10000 ft) without output deterioration.
There are several individual purchase options available:
- ACOM 06AT | Automatic Antenna Tuner and Switch
- ACOM 04AT | Remote Automatic Antenna Tuner and Switch
- | The ACOM 04AT and 06AT automatic antenna tuners with four-way antenna switches are designed to work with our transistor (solid state) amplifier series, including the ACOM 1400S.
- Using the ACOM 06AT or 04AT with an ACOM 1400S amplifier is highly recommended.
Brochures & Manuals
ACOM 1400S Brochure | October 2024 | PDF file
ACOM Product Catalog | October 2023 | PDF file
Firmware & Tools
Will be available later.
Technical Information & Tools
CAT cables for ACOM S-series amplifiers Technical Information | November 2022 | PDF file
NEW for ACOM Enthusiasts and Admirers:
ACOM 1400S Wallpaper image 1920x1080 dpi | JPG file
Delivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.





