We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
ANAN-G2 (with display) HF & 6M 100W Ultra High Performance SDR
SKU Part Number:
ANAN-G2
Introducing the ANAN-G2, the new generation ultra high performance SDR
The G2 (Gen2 SDR) provides the same stellar Receiver and transmitter...
Read More
Read More
£4,595.99
£3,829.99
Pre Order
Seen this product cheaper elsewhere?
Call 0345 2300 599
Introducing the ANAN-G2, the new generation ultra high performance SDR
The G2 (Gen2 SDR) provides the same stellar Receiver and transmitter performance as the earlier ANAN radios, however, it provides a huge leap forward in processing capability and flexibility in use case scenarios.
- Large FPGA with 930 GMAC/s of processing capability
- Built-in Linux OS with Desktop running on a quad core Arm platform
- Capable of Stand-Alone operation without a PC
- Use it with a PC running Thetis
- Hardware capable of remote operation (please note this is a future feature set not currently available)
- Rich I/Os - 2 x HDMI 4K, Gigabit Ethernet, 3 x USB, 7 inch Touch Panel, Knobs/Buttons for use as a traditional radio and much more!
- XLR Balanced Mic Input (built-in preamp) for Broadcast Quality Audio!
Watch this to get to learn more about the Gen2 Platform
| ANAN-7000/8000DLE MKII | ANAN-G2 | |
| FPGA DSP Peak Processing capacity | 240 GMAC/s | 930 GMAC/s |
| Number of DDCs | 8 | 10 |
| Stand-Alone Capability | No | Yes |
| Thin Client/Remote Capability | No | Hardware Capable (Future Feature Set) |
| Protocol 2 Support | Beta | Fully Supported |
| Built-in CPU | No | Yes |
| Balanced Audio Input | No | Yes |
Specifications:
General Specifications:
- Architecture: Direct Sampling DDC/DUC Transceiver
- Interface: Ethernet and PCIe (Internally)
- Full Desktop Linux OS
- Phase Noise (Clock): -149dB @ 10Khz
- TCXO Stability (Typical): /- .1 PPM
- Modes: CW, SSB, NFM, AM, Digital
- Antenna Ports: Three BNC 50 ohms Software Configurable Ports, Three BNC ADC1 Bypass and Loop in ports, One BNC for RX2
- Frequency Resolution: 1 Hz
- Anan G2
Electrical Specifications:
- 13.8v DC @ 25A, 2.5A Receive/25A Transmit
Mechanical Specifications:
- 7.5Kg (approx. Weight)
- Dimensions: 314MM (W) x 138MM (H) x 368MM (D) (Not including extrusions).
Receiver Specifications:
- Receiver Architecture: Direct Down Conversion
- Dual 16 bit Phase Synchronous ADCs
- Independent filter banks for each ADC
- 6M LNAs
- Frequency Coverage: 9Khz to 60Mhz
- Attenuator: 1-30dB step attenuator
- Reciprocal Mixing Dynamic Range (RMDR): 116dB @ 2Khz offset
- Receiver Phase noise: -149dB @ 10Khz
- Image rejection: 90dB
- Hardware support for 10 independent receivers assignable to either ADC
Transmitter Specifications:
- Transmitter Architecture: Direct Up Conversion
- DAC Resolution: 16 bit
- RF Output Power: 100W PEP SSB, FM, RTTY, Digital; 1-30W AM, 100W CW
- IMD: IMD3 typically -68dB below PEP @ 100W output on 20M
- Harmonics: Typically better than -43dBc on HF and -60dBc on 6M
- Carrier and Opposite Sideband Suppression: Better than -80dBc
- Transverter IF Output: 0db to 15dB
IOs:
- Audio Barrel Line In, Digital Inputs, PTT in, PTT Out
- DB9 Seven Software Configurable Open Collector Outputs
- SMA XVTR, 10Mhz reference Input
- 3.25mm Barrel Mic, CW Key, Headphones and two Powered Speaker Outputs
- Mini XLR Mic Input with preamp.
- RJ45 Ethernet LAN Connector
- 2 x HDMI 4K Video Outputs
- 3 x USB Ports
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]