200w 49:1 unun for end fed 1/2 wave EFHW
SKU Part Number: BL49-LITE
  49:1 Matching Transformer suitable for Multi Band End Fed Half Wave antennas   Ideal for home or field use, fits into a coat pocket   All...
Read More
Special Price £48.95 Regular Price £55.96
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
 
49:1 Matching Transformer suitable for Multi Band End Fed Half Wave antennas
 
Ideal for home or field use, fits into a coat pocket
 
All you need to do is add your antenna wire - the Messi & Paoloni Dipoflex wire is ideal; See accessories
 
For example, if you attach 132ft of wire you will get 80, 40, 20, 15 & 10m
or 67ft of wire will give you 40, 20, 15 & 10m
Plus, if you use a AMU/ATU you MAY also get 30, 17 & 12m depending on your setup

*** When using 132ft wire, you may get 160m 'Top Band' with an external AMU/ATU ***
 
Your wire may be straight, sloper, inverted V, inverted L etc
 
Ideal for limited space and stealth applications
 
SO239 Socket
 
Power handling 200W PEP / 50W AM, Data, FT8, FT4 etc  -  50% TX/RX (Subject to 1:1 SWR without tuner)


Just add 1/2 wave wire to this transformer and tune the length to your preference.

Note that the antenna will be working on multiple frequencies.

Half wave for 80m (~132 feet) will be half wave on 80m and two half waves on 40m, four half waves on 20m, eight half waves on 10m etc... So there may be some gain on the higher bands.

If you want to use it on any particular frequency, just cut the half wavelength wire for that frequency or any frequency from 3-30MHz.

Wire length can be calculated by the following formulas:
  • Length (feet)= 468/Frequency (MHz) or
  • Length (meters)=142.5/Frequency (MHz)
Always cut a wire a bit longer to allow for tuning to your desired frequency.
Tuning depends on height above ground and nearby objects.
There are so many ways to install the wire so experiment away.

Such an antenna will not need radials and in most cases NO Tuner at all.

You can use it as vertical against good radial counterpoise.

4.2m (13.8ft) Counterpoise at the lug next to the SO-239 connector is recommended.

The Coax braid must be earthed at the rig end.
Long wires tend to collect electrostatic charge (usually when the weather is stormy) which can produce ESD (electrostatic discharge) at the end of your cable and damage your equipment.

If the transformer is used with an external tuner in conjunction with a single wire antenna, power should be reduced on those bands that show an SWR above 1.2 without the tuner.
 
Transmitting too much power or with a high SWR will cause RF power to overheat the Unun. Once overheated enough, Unun's no longer work, the antenna is no good, and the warranty is voided.

*** PLEASE SEE ACCESSORIES FOR 50m LENGTH OF DIPOFLEX WIRE ***

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.