Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599Messi & Paoloni CONTEST-FLEX 10 /.400"
Exceptionally flexible low-loss coax developed specifically for HF and VHF stations, tight cable routes and rotator-operated antennas.
Choose your cable length and connector combination and let us build the lead for you.
Optimised for HF/VHF. Extraordinary flexibility. Perfect for rotators.
CONTEST-FLEX 10 focuses on the frequencies used by the majority of amateur radio operators, combining excellent HF/VHF performance with a highly flexible 19-wire copper centre conductor.
Messi & Paoloni CONTEST-FLEX 10 /.400" is a 10.3mm 50 ohm coaxial cable developed specifically around the requirements of HF and VHF amateur radio stations.
Rather than concentrating solely on extreme high-frequency performance, M&P has optimised CONTEST-FLEX 10 across the 1MHz to 467MHz range. This makes it particularly well suited to HF, 6m, 2m and 70cm installations.
Its standout feature is its 19-wire stranded copper centre conductor. This gives CONTEST-FLEX 10 exceptional flexibility for a 10.3mm cable and makes it particularly attractive for antenna rotators, tight bends and installations where the feed line needs to move.
Specifically developed for amateur radio operation between 1MHz and 467MHz rather than chasing extreme microwave specifications.
Highly stranded 19 x 0.59mm copper centre conductor provides exceptional flexibility for a 10.3mm coax.
Excellent flexibility makes it particularly suitable for beam antennas, rotator loops and repeated movement.
High-pressure physically foamed polyethylene dielectric provides excellent RF performance with low attenuation.
Where CONTEST-FLEX 10 Fits in the M&P Range
CONTEST-FLEX 10 and ULTRAFLEX 10/C are not simply two versions of the same cable. They are optimised for slightly different jobs.
Optimised specifically for HF and VHF, with a 19-wire centre conductor providing extraordinary flexibility.
The natural choice for typical amateur stations, rotator-operated antennas, tight bends and operators looking for excellent performance without paying primarily for microwave capability.
M&P's performance-focused flexible cable where maintaining the most stringent specifications at higher frequencies is the priority.
M&P recommends ULTRAFLEX 10/C from approximately 400MHz upwards when maximum high-frequency performance is required.
Made for Rotator-Operated Antennas
The centre conductor consists of 19 individual 0.59mm copper wires, giving an overall conductor diameter of approximately 2.9mm.
Using 19 strands rather than a much less finely stranded conductor allows CONTEST-FLEX 10 to bend and move more naturally, making it particularly well suited to rotator loops and antenna systems where the cable repeatedly changes position.
M&P specifies a minimum bend radius of 80mm for repeated bending up to 15 bends and only 40mm for a single bend or choke.
Optimised HF and VHF Performance
M&P specifically describes CONTEST-FLEX 10 as an HF/VHF-optimised cable and states that at certain frequencies its performance can even exceed ULTRAFLEX 10/C.
Attenuation at 20°C is specified at only 1.1dB per 100m at 7MHz, 1.5dB at 14MHz, 2.1dB at 28MHz, 3.0dB at 50MHz and 5.4dB at 144MHz.
At 430MHz attenuation remains a respectable 10.5dB per 100m, with M&P rating the cable for operation through to 467MHz.
M&P specifically describes the performance of CONTEST-FLEX 10 as far superior to conventional RG213.
Despite remaining within the familiar 10mm cable class, the modern foamed dielectric, additional foil screen and high-performance braid provide substantially improved RF performance and screening.
Greater Than 105dB Screening
Beneath the braid is a 100% copper foil first screen with an applied polyethylene layer designed to help prevent cracking during short-radius bends.
The outer screen uses a 192-wire copper-clad aluminium reactive braid with approximately 85% coverage.
M&P manufactures the braid using a 24-spool process rather than a conventional 16-spool machine. The additional crossover points help the braid react to bending and twisting in a spring-like manner while providing excellent screening performance.
Overall screening efficiency is specified at greater than 105dB between 100MHz and 2000MHz.
Flexible Without Excessive Weight
CONTEST-FLEX 10 weighs approximately 11.6kg per 100 metres.
Keeping the cable relatively manageable is particularly useful on beam installations, where a section of coax may be hanging and moving as the antenna rotates.
Serious Power Handling
The cable is equally capable in high-power HF and VHF installations. At 40°C, M&P specifies continuous power handling of approximately 4500W at 14MHz, 3210W at 28MHz, 2330W at 50MHz and 1270W at 144MHz.
M&P specifies a maximum peak-power rating of 10kW. Continuous power capability depends on operating frequency and cable temperature, so the frequency-specific ratings should be followed for demanding high-power installations.
Where CONTEST-FLEX 10 Works Best
The 19-wire centre conductor makes CONTEST-FLEX 10 particularly well suited to rotator loops and moving antenna systems.
Excellent attenuation figures across the amateur HF bands make it a strong choice for permanent and contest stations.
Specifically optimised for HF/VHF operation, with just 3.0dB/100m at 50MHz and 5.4dB/100m at 144MHz.
Highly stranded construction makes it easier to route where a less flexible 10mm cable would be awkward.
Low loss, excellent screening and high power handling suit demanding HF and VHF contest installations.
A significant performance and flexibility upgrade for installations currently using conventional RG213.
Cable Construction
- 19 x 0.59mm stranded copper inner conductor
- 2.9mm overall inner conductor diameter
- Triple-layer high-pressure physically foamed polyethylene dielectric
- 100% copper foil first screen with applied PE layer
- 85% coverage reactive braid
- 192 copper-clad aluminium braid wires manufactured using 24 spools
- UV-resistant black PVC outer jacket
- 10.3mm overall cable diameter
- 87% velocity factor
- Screening efficiency greater than 105dB from 100 to 2000MHz
- Maximum peak power 10,000W
CONTEST-FLEX 10 uses a flexible PVC outer jacket and is not intended for direct burial. For an underground 10.3mm installation, use a cable specifically designed for direct burial such as EXTRAFLEX BURY 10.
CONTEST-FLEX 10 /.400" Technical Specifications
General
Construction
Minimum Bend Radius
80mm for up to 15 bends
40mm
Structural Return Loss
Attenuation at 20°C
Continuous Power Handling at 40°C
Delivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.














