We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
Bundle Kit - Signature 12.4m All Band Vertical 80m - DX Commander
SKU Part Number:
DXCOM-SIGNATURE 12-KIT
Multi-Band Vertical Ham Radio DXers Choice for instant multi-band results across the whole HF spectrum (80m to 10m).
This is Callum’s favourite...
Read More
Read More
£499.00
£415.83
Availability: In stock
Seen this product cheaper elsewhere?
Call 0345 2300 599Multi-Band Vertical Ham Radio DXers Choice for instant multi-band results across the whole HF spectrum (80m to 10m).
This is Callum’s favourite antenna which is used daily and on most Friday Livestreams.
Signature 12.4 – All Band HF Antenna
80m, 40m, 20m, 17m, 15m, 12m, 10m & 6m
Now with NEW grey high-density polyethylene marine UV stable Plastic Spreaders
Kit delivers 80m as a loaded quarter wave with 30m as a colinear and full quarter wave on 40m and up. 12m and 10m get 3/4 wave elements.
Shipped in 2 x boxes (See components page).
Kit delivers 80m as a loaded quarter wave with 30m as a colinear and full quarter wave on 40m and up. 12m and 10m get 3/4 wave elements.
Shipped in 2 x boxes (See components page).
Box 1:
- 12m Signature pole
Box 2:
- 3x 100m DX10 Wire (elements and radials)
- 2 x massive 5251 Aluminium plates (ground and driven)
- 5 x UHMWPE Spreader / Guy plates
- All nuts, bolts, washers, Fork connectors, paracord, Dyneema shock cord etc
- Full HCL stay up kit
Tilt-base is not supported directly from us however DX Engineering do a tilt-base and so do Barenco in UK.
The ID of the base of the is exactly 50.8mm / 2-inches. You can build a simple tilt-over base with a stub mast not longer than say 30cm / 1 foot long to support the base.
You can guy this at the 3rd spreader. You DO NOT need a tilt over base.. This can sit directly on the ground. (You can also storm-proof it by guying at plate #2 and plate #4 instead)
Radials: Enough to get you nice and loud on 80m and louder on 40m and up. Pin these down either with radial pins or wood dowels / lawn stakes etc.
Note: We don’t supply those little plastic carabiners for the shock-cord ends any more. They becomne brittle and break. We moved to a superier solution of stopper knots and loops. See User Guide.
Attention International Customers
If you are purchasing from outside the UK, we can offer to send all DX Commander units to you with the VAT and import fees pre-paid! Simply place the order online without VAT, and we will contact you to let you know how much the additional fees are. The fees will be your local VAT rate plus a £16 courier handling fee.
If you would prefer to pay for the fees before placing the order, please contact [email protected] and we can send over a single payment link.
Multi-Band Vertical Ham Radio DXers Choice for instant multi-band results across the whole HF spectrum (80m to 10m).
This is Callum’s favourite antenna which is used daily and on most Friday Livestreams.
Signature 12.4 – All Band HF Antenna
80m, 40m, 20m, 17m, 15m, 12m, 10m & 6m
Now with NEW grey high-density polyethylene marine UV stable Plastic Spreaders
Kit delivers 80m as a loaded quarter wave with 30m as a colinear and full quarter wave on 40m and up. 12m and 10m get 3/4 wave elements.
Shipped in 2 x boxes (See components page).
Kit delivers 80m as a loaded quarter wave with 30m as a colinear and full quarter wave on 40m and up. 12m and 10m get 3/4 wave elements.
Shipped in 2 x boxes (See components page).
Box 1:
- 12m Signature pole
Box 2:
- 3x 100m DX10 Wire (elements and radials)
- 2 x massive 5251 Aluminium plates (ground and driven)
- 5 x UHMWPE Spreader / Guy plates
- All nuts, bolts, washers, Fork connectors, paracord, Dyneema shock cord etc
- Full HCL stay up kit
Tilt-base is not supported directly from us however DX Engineering do a tilt-base and so do Barenco in UK.
The ID of the base of the is exactly 50.8mm / 2-inches. You can build a simple tilt-over base with a stub mast not longer than say 30cm / 1 foot long to support the base.
You can guy this at the 3rd spreader. You DO NOT need a tilt over base.. This can sit directly on the ground. (You can also storm-proof it by guying at plate #2 and plate #4 instead)
Radials: Enough to get you nice and loud on 80m and louder on 40m and up. Pin these down either with radial pins or wood dowels / lawn stakes etc.
Note: We don’t supply those little plastic carabiners for the shock-cord ends any more. They becomne brittle and break. We moved to a superier solution of stopper knots and loops. See User Guide.
Attention International Customers
If you are purchasing from outside the UK, we can offer to send all DX Commander units to you with the VAT and import fees pre-paid! Simply place the order online without VAT, and we will contact you to let you know how much the additional fees are. The fees will be your local VAT rate plus a £16 courier handling fee.
If you would prefer to pay for the fees before placing the order, please contact [email protected] and we can send over a single payment link.
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]