main product photo
ANAN-G2-1K 1000W HF & 6M SDR Transceiver ***DEPOSIT***
SKU Part Number: ANAN-G2-1K
This is a pre-order deposit - final price and delivery date is TBC. 1500W (High Power Mode), 800W (low Power Mode) body { font-family:...
Read More
£250.00 £208.33
Pre-Order Deposit
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

This is a pre-order deposit - final price and delivery date is TBC. 1500W (High Power Mode), 800W (low Power Mode)

1500W (High Power Mode), 800W (low Power Mode)

The G2 (Gen2 SDR) provides the same stellar Receiver and transmitter performance as the earlier ANAN radios, however, it provides a huge leap forward in processing capability and flexibility in use case scenarios.

  • Large FPGA with 930 GMAC/s of processing capability
  • Built-in Linux OS with Desktop running on a quad core Arm platform
  • Capable of Stand-Alone operation without a PC
  • Use it with a PC running Thetis
  • Hardware capable of remote operation (please note this is a future feature set not currently available)
  • Rich I/Os - 2 x HDMI 4K, Gigabit Ethernet, 2 x USB

Watch this to get to learn more about the Gen2 Platform

Feature ANAN-7000/8000DLE MKII ANAN-G2
FPGA DSP Peak Processing capacity 240 GMAC/s 930 GMAC/s
Number of DDCs 8 10
Stand-Alone Capability No Yes
Thin Client/Remote Capability No Hardware Capable (Future Feature Set)
Protocol 2 Support Beta Fully Supported
Built-in CPU No Yes
Balanced Audio Input No Yes

General Specifications:

  • Architecture: Direct Sampling DDC/DUC Transceiver
  • Microprecessor controlled protection for SWR, Temperature, Voltage/Current (Over or Under)
  • Interface: Ethernet
  • Phase Noise (Clock): -149dB @ 10Khz
  • TCXO Stability (Typical): /- .1 PPM
  • Modes: CW, SSB, NFM, AM, Digital
  • Antenna Ports: Three SO-239 50 ohms Software Configurable Ports, One BNC for RX2
  • Frequency Resolution: 1 Hz

 

Electrical Specifications:

  • 100-250v AC

 

Mechanical Specifications:

  • 15Kg (approx. Weight)
  • Dimensions: 420MM (L)  x 135MM (H) x  398MM (D) (Not including extrusions)

 

Receiver Specifications:

  • Receiver Architecture: Direct Down Conversion
  • Dual 16 bit Phase Synchronous ADCs
  • Independent filter banks for each ADC
  • 10/6M LNAs
  • Frequency Coverage: 9Khz to 60Mhz
  • Attenuator: 1-30dB step attenuator
  • Reciprocal Mixing Dynamic Range (RMDR): 116dB @ 2Khz
  • Receiver Phase noise: -149dB @ 10Khz
  • Image rejection: 100dB
  • Hardware support for 7 independent receivers assignable to either ADC

 

Transmitter Specifications:

  • Transmitter Architecture: Direct Up Conversion
  • DAC Resolution: 16 bit
  • RF Output Power (Maximum): 1000W PEP: SSB/CW. 500W:  FM, RTTY, Digital. 275W: AM
  • IMD: IMD3 typically -72dB @ 1000W PEP output on 20M
  • Harmonics: Typically better than -50dBc on HF and -60dBc on 6M
  • Carrier and Opposite Sideband Suppression: Better than -80dBc
  • Transverter IF Output: 0db to 15dB

 

IOs:

  • RCA Line In, Digital In, PTT in, PTT Out
  • DB9 Seven Software configurable Open Collector Outputs
  • SMA XVTR TX Out, 10Mhz Reference Input
  • 6.25mm Barrel Mic, CW Key, Headphones and Speaker Outputs
  • SMA PureSignal (Predistortion) Loop Input and Output
  • RJ45 Ethernet LAN Connector
  • 2 x HDMI
  • 2 x USB

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]