ZUMSPOT-RPI rev 0.6r with 1.3” OLED, antenna and standoffs
SKU Part Number: ZUMSPOT-RPI
For tutorials on how to get on Pi-Star, please see the videos below:   ZUMspot single band UHF Modem, Raspberry Pi Zero (V1 or V2 depending on...
Read More
£199.96 £166.63
Availability: In stock
call

Want more help on this product?

Call 0345 2300 599

For tutorials on how to get on Pi-Star, please see the videos below:

 

ZUMspot single band UHF Modem, Raspberry Pi Zero (V1 or V2 depending on availability), 2 part ZUMcase, SD Card loaded with Pi-Star ready for you to configure, use with your compatible digital radio.  

An optional Bluetooth board is available for Android, this replaces the Pi-Zero and is compatable with Blue-DV (please see accessories)

We fully test and assemble the ZUMspot hardware, there is some further setting up required, you will also require a compatible digital radio.

 

**You require a compatible digital radio, DMR, C4FM, Dstar, please see accessories**  


The ZUMspot RPi is an advanced radio module board. 

Pi-Star website: https://www.pistar.uk/

  • Instructions on how to setup PiStar  HERE or MLS quick Guide HERE
  • Create a Wi-Fi "wpa_supplicant.conf" file HERE  All you need to do then, is drop this onto the "Boot" volume of your Pi-Star SD card.

Supplied with a Raspberry Pi Zero WH and the MMDVM software becomes a small and efficient multi-mode digital hotspot needing minimal set up and configuration.

ZUMspot Board Features:

High performance 32-bit ARM processor
The board is fully assembled and tested
Supports DMR, P-25, D-Star, System Fusion and NXDN
Onboard LEDs to show status (Tx, Rx, PTT, Mode)
Up to 10mW RF power
SMA antenna connector, UHF antenna included
Mounts cleanly on all current Raspberry Pi's including the Pi Zero
Works on ODROID boards
The firmware is pre-loaded and is easily upgraded via software.
Built-in 1.3" OLED display
Connection for Nextion LCD display
Open source firmware (MMDVM) and board design

The ZUMspot Pi Board Package Includes:

ZUMspot Pi UHF Board

UHF Antenna
Raspberry Pi Zero WH
Plastic Case

THE FOLLOWING ARE NOT INCLUDED (Plase see accessories)

Micro USB Cable

USB PSU

 

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link below and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, sales@hamradio.co.uk