DVMEGA AMBE 3000
SKU Part Number: DVMEGA-AMBE-3000
Usefull addon : Seeeduino  Compatible Microphone : MH48 DVMEGA AMBE3000 shield fits on top of an...
Read More
£99.95 £83.29
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Usefull addon : Seeeduino 

Compatible Microphone : MH48

DVMEGA AMBE3000 shield fits on top of an Arduino MEGA. This board is equiped with a AMBE3000Vocoder and PCM3500 Codec. The PCM3500 converts the analog microphone signal into a digitalstream (PCM). And that, conversely, the digital PCM stream is converted back into an analog audio signal. The digital PCM format is 8Khz with a depth of 16 bits. This would be an amount of data of128000 bits per second. Not suitable to be sent via a 4800 bps radio connection. The AMBE3000Vocoder makes of 128000 bps a digital signal of 3600 bps. This is the voice information and errorcorrection codes. These error correction codes make it possible to restore a signal which arrives corrupted at the receiver station up to a certain level.

DVMEGA AMBE3000 can be used as AMBE Dongle (Digital Voice converter) but also as a digital transceiver in combination with the Dual band radio shield or GMSK shield.
 
 
The DVMEGA AMBE3000 shield will be delivered in conjunction with a LF amplifier / connection board. This board is equipped with a 0.3 watt LF amplifier and connectors for Mike, Speaker and power. Later, this module can be placed on the transceiver mainboard.
 

Block diagram

 

 
Instructions
 
Step 1, Assemble LF audio board
 
Assemby instruction LF audio board
 
Step 2, Select or make microphone
 
Compatible microphones are MH48 (Yaesu) type.
 
Step 3, Load the firmware.

Download and install XloaderThis is a simple program to load the firmware.

Download the hex file for your ARDUINO :

Start Xloader, choose the correct hex file, select Device and set the COM port to the port number that is assigned to the ARDUINO . The baud rate defaults to 115200. Then press Upload to load the firmware. If the firmware is loaded correctly a message will appear below in the bar of the Xloader screen .

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]