ZUMSpot Radio-MMDVM for Pi. Rev 1.0
SKU Part Number: ZUMRADIO-MMDVM-PI
Zum-radio control board MMDVM, connect to a radio with 9600Baud compatability "eg: ft7800, ft7900, ft8900, ftm100, ftm400 etc" and turn it into a...
Read More
£89.95 £74.96
Availability: In stock
call

Seen this product cheaper elseware?

Call 0345 2300 599
Zum-radio control board MMDVM, connect to a radio with 9600Baud compatability "eg: ft7800, ft7900, ft8900, ftm100, ftm400 etc" and turn it into a multi mode digital node.

  • Designed for repeater and high power hotspot applications (Additional Hardware Required: Radio(s) and Raspberry Pi)
  • Fully assembled and tested full sized Pi format PCB, Mounts cleanly on RPI 2 and 3
  • Utilizes a high performance 32bit ARM processor running at 180Mhz (Room for future upgrades)
  • Fourth generation analogue filter design that provides an extremely low BER compared to previous generations
  • 2 Multi-turn pots for fine RX and TX adjustments
  • Status/Mode LED’s and (PTT, COS, Power, D-Star, DMR, P25, NXDN, Fusion)
  • Connections for Nextion LCD display and I2C LCD/OLED Display
  • 8 pin JST Connector with 150mm wires
  • Open source MMDVM firmware preloaded and easily upgraded by software


MMDVM Schematic:


Zum-radio control board MMDVM, connect to a radio with 9600Baud compatability "eg: ft7800, ft7900, ft8900, ftm100, ftm400 etc" and turn it into a multi mode digital node, or use two radios for a simple repeater.

You can also utilise a DR1 yaesu repeater for Dstar, C4FM, DMR, etc, a great project aimed at the more advanced radio enthusiast. 

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]