Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599
mAT-TUNER MAT-Y200 200W Automatic Antenna Tuner for Yaesu Transceivers
Claim £340 Cashback
Buy your Yaesu FTDX101MP new from us at full price and you are eligible for £340 cashback directly from Yaesu, subject to their terms.
Offer ends 31 December 2026
Cashback Details & Claim →You pay the full product price to ML&S; cashback is claimed separately from Yaesu after purchase. Eligibility and claim deadlines are subject to Yaesu's terms.
Yaesu FTDX101MP
200W HF/50MHz Hybrid SDR Transceiver
Precision receiver engineering, independent dual reception and exceptional control over strong-signal interference. The FTDX101MP combines Yaesu's high-performance narrow-band SDR architecture with real-time spectrum technology in a fully equipped 200W flagship transceiver.
Discover the Yaesu FTDX101MP
Take a closer look at the Yaesu FTDX101MP in this video.
A modern flagship with a remarkable heritage
The Yaesu FTDX101MP takes its name from the celebrated FT-101 series and carries the MP designation in honour of Yaesu founder Sako Hasegawa, JA1MP. Its engineering focuses on one of the most demanding aspects of HF operation: recovering a weak signal in the presence of considerably stronger adjacent signals.
Designed for demanding DX, contest and everyday amateur-radio operation, the FTDX101MP combines a 200W transmitter, two independent receiver paths, sophisticated RF filtering and a comprehensive operating interface. Unlike the 100W FTDX101D, the MP version includes an external mains power supply with integrated speaker, VC-Tune on both receivers and an additional factory-fitted narrow CW roofing filter.
Engineered for serious HF operation
RF Output
Up to 200W output on supported HF and 50MHz modes, providing additional transmit capability without requiring an external amplifier for that power level.
Independent Receivers
MAIN and SUB receiver architecture for simultaneous reception, split-frequency operation and monitoring different frequencies.
Factory-Fitted VC-Tune
Motor-driven RF preselectors are fitted to both receiver paths for improved rejection of troublesome signals outside the selected passband.
Colour Touchscreen
High-resolution display with spectrum scope, waterfall, 3DSS visualisation and configurable operating information.
The advantage of Hybrid SDR
The FTDX101MP brings together two complementary signal-processing techniques. A narrow-band SDR receiver is optimised for demanding signal reception, while a direct-sampling SDR system provides detailed, real-time visibility of band activity.
Narrow-Band SDR
High-performance down-conversion receiver circuitry uses crystal roofing filters, a low-noise front end and high-resolution digital signal processing. Strong signals outside the desired receive bandwidth can be attenuated before reaching the analogue-to-digital converter, helping preserve receiver performance under difficult conditions.
Direct-Sampling SDR
A complementary direct-sampling receiver supports the real-time spectrum display, giving the operator a clear view of nearby activity. Signals can be located visually and then selected for reception through the narrow-band receiver system.
This combination is particularly valuable during crowded contests, DX pile-ups and operation near powerful local transmitters, where both strong-signal handling and spectrum awareness matter.
Exceptional close-in signal handling
Yaesu designed the FTDX101 series around exceptional performance with closely spaced signals. Its 400MHz High Resolution Direct Digital Synthesizer (HRDDS), low-noise oscillator design and high-performance filtering contribute to the receiver's strong-signal characteristics.
Reciprocal Mixing Dynamic Range at 2kHz spacing.
Blocking Dynamic Range at 2kHz spacing.
Third-order Intermodulation Dynamic Range at 2kHz spacing.
Manufacturer-published performance figures under Yaesu's specified test conditions. Actual receiver performance depends on configuration, operating frequency and measurement conditions.
Dual VC-Tune. Greater control over interference.
The FTDX101MP includes Yaesu's motor-driven VC-Tune RF preselector on both the MAIN and SUB receivers. This differentiates it from the standard FTDX101D configuration, which has VC-Tune fitted to the MAIN receiver only.
VC-Tune employs a variable capacitor driven by a precision stepping motor. Its resonant frequency can be adjusted to help reject strong interfering signals while maintaining reception of the desired signal. Yaesu specifies a maximum attenuation capability of approximately 70dB under its measurement conditions.
The system is controlled using the front-panel VC-TUNE key and Multi-Purpose VFO Outer Dial. Tuning settings can be retained by band, reducing the need to repeat adjustments when returning to a familiar operating condition.
Crystal roofing filters for demanding reception
The FTDX101MP uses narrow crystal roofing filters as part of its receiver's front-end selectivity system. The MP model includes additional factory-installed CW filtering beyond the standard FTDX101D equipment.
| Roofing Filter | MAIN Receiver | SUB Receiver |
|---|---|---|
| 300Hz CW | Standard | Optional |
| 600Hz CW | Standard | Standard |
| 3.0kHz SSB | Standard | Standard |
| 1.2kHz | Optional | Optional |
See the band in remarkable detail
The 7-inch, 800 x 480 pixel colour touchscreen provides a detailed operating display while retaining extensive dedicated front-panel controls. Spectrum and waterfall information gives the operator an immediate view of signals across the selected span.
3DSS Spectrum Stream
Yaesu's three-dimensional spectrum visualisation offers an alternative way of observing signal strength and changes in band activity over time.
Real-Time Spectrum Scope
The direct-sampling SDR system provides a real-time view of nearby signals, supporting rapid identification of operating opportunities.
Dual-Receiver Displays
Configurable display arrangements support MAIN and SUB receiver operation, including dual-band spectrum monitoring.
Purpose-built front-panel controls
The FTDX101MP balances modern touchscreen operation with a traditional high-grade radio control layout. Important functions remain accessible directly from the front panel, allowing the operator to make rapid adjustments without navigating multiple menus.
MPVD Outer Dial
The aluminium Multi-Purpose VFO Outer Dial provides convenient adjustment of functions including SUB VFO tuning, VC-Tune, clarifier and user-selectable controls.
Active Band Indicator
Illuminated band-selection controls help identify MAIN and SUB receiver assignments and the transmitting VFO at a glance.
Dedicated Receiver Adjustments
Quick access to important receiver functions such as WIDTH, SHIFT and RF preselection supports precise tuning during changing band conditions.
Split and Dual Watch
Independent receiver controls make it practical to monitor different frequencies and manage split-frequency contacts during DX operation.
200W transmission with an emphasis on signal purity
The FTDX101MP is the high-power member of the FTDX101 family, delivering up to 200W RF output in supported operating modes. Its transmitter design places considerable emphasis on low phase noise and maintaining signal quality throughout the transmit chain.
Yaesu's 400MHz HRDDS oscillator architecture supports both receiver and transmitter performance. Transmit signal generation uses high-resolution digital circuitry, with careful attention paid to the clock distribution, conversion stages and power amplifier. This is intended to maintain a clean transmitted signal, particularly important on crowded amateur bands.
FPS-101 external supply and speaker included
The FTDX101MP is supplied with the dedicated Yaesu FPS-101 external mains power supply. This is part of the standard MP configuration and is not an additional purchase.
The FPS-101 incorporates a front-facing speaker, combining the power supply and external loudspeaker in a matching unit for the transceiver.
The FTDX101MP uses its supplied external AC power supply rather than the conventional owner-supplied 13.8V DC station supply used by the FTDX101D. Allow appropriate bench space and ventilation for both units.
Remote operation and station integration
The FTDX101 series supports computer-based remote control, allowing compatible software to manage operating functions and monitor receiver information. Remote operation over a LAN or internet connection requires the appropriate optional external LAN equipment and software configuration. This equipment is not included as standard with the FTDX101MP.
What's included?
Standard documentation and small accessories are provided according to the supplied UK package. Optional roofing filters and remote-control LAN equipment are not included unless specifically stated.
Manufacturer information
Consult Yaesu's official documentation for full technical details and operating information.
View Yaesu HF Catalogue (PDF) →Yaesu FTDX101MP
200W HF/50MHz Hybrid SDR Transceiver with independent MAIN and SUB receivers, dual VC-Tune RF preselection and FPS-101 external power supply.
General Specifications
| Model | FTDX101MP |
|---|---|
| Manufacturer | Yaesu Musen |
| Transceiver Type | HF/50MHz all-mode hybrid SDR |
| Receiver Architecture | Dual independent narrow-band SDR receivers with direct-sampling SDR spectrum display |
| Receiver Frequency Range | 30kHz to 75MHz |
| Transmit Bands | Amateur HF and 50MHz bands; UK 70MHz capability subject to applicable configuration and authorisation |
| Operating Modes | SSB, CW, AM, FM, RTTY and digital/data modes |
| Frequency Stability | ±0.1ppm under specified conditions |
| Antenna Impedance | 50 ohms nominal, unbalanced |
| Supply Voltage | 100 to 240V AC via supplied FPS-101 |
| Power Consumption | Approximately 120VA receiving; 720VA transmitting at 200W |
| Operating Temperature | 0 to +50 degrees C |
| Dimensions | 420 x 130 x 322mm (W x H x D, excluding projections) |
| Weight | Approximately 13.5 to 14.3kg, depending on published specification |
Transmitter Specifications
| RF Output Power | Up to 200W on supported SSB, CW, FM and data modes |
|---|---|
| AM Output | 50W carrier |
| Transmit Architecture | Digitally generated transmit signal with high-resolution conversion and power amplification |
| SSB Modulation | J3E, balanced modulation |
| AM Modulation | A3E |
| FM Modulation | F3E |
| FM Deviation | ±5kHz or ±2.5kHz narrow |
| Microphone Impedance | 600 ohms nominal |
| SSB Carrier Suppression | 60dB or better |
| Unwanted Sideband Suppression | 69dB or better |
Receiver Specifications
| Receiver Design | Double-superheterodyne narrow-band SDR with complementary direct-sampling SDR |
|---|---|
| MAIN Receiver | Independent receiver with VC-Tune fitted |
| SUB Receiver | Independent receiver with VC-Tune fitted |
| First IF (MAIN) | 9.0005MHz |
| First IF (SUB) | 8.9000MHz |
| Second IF | 24kHz |
| Digital Signal Processing | High-resolution A/D conversion and FPGA-based processing |
| Local Oscillator | 400MHz HRDDS |
| Reciprocal Mixing Dynamic Range | 123dB or greater at 2kHz spacing (manufacturer figure) |
| Blocking Dynamic Range | 150dB or greater at 2kHz spacing (manufacturer figure) |
| Third-Order Intermodulation Dynamic Range | 110dB or greater at 2kHz spacing (manufacturer figure) |
| Local Oscillator Phase Noise | Approximately -150dBc/Hz at 2kHz separation (manufacturer figure) |
| RF Preselector | Motor-driven VC-Tune on MAIN and SUB |
| VC-Tune Attenuation | Up to approximately 70dB under specified conditions |
Receiver Roofing Filters
| Filter | MAIN | SUB |
|---|---|---|
| 300Hz CW | Standard | Optional |
| 600Hz CW | Standard | Standard |
| 3.0kHz SSB | Standard | Standard |
| 1.2kHz | Optional | Optional |
| 12kHz AM | Standard | Standard |
Display and Controls
| Display | 7-inch colour TFT touchscreen |
|---|---|
| Resolution | 800 x 480 pixels |
| Spectrum Display | Real-time spectrum scope and waterfall |
| 3D Display | Yaesu 3DSS (3-Dimensional Spectrum Stream) |
| Band Indicators | ABI (Active Band Indicator) |
| Main Tuning | Precision VFO dial |
| Additional Control | MPVD (Multi-Purpose VFO Outer Dial) |
| Dual Reception | Independent MAIN and SUB receiver operation |
| Remote Operation | Supported with appropriate optional external LAN equipment and compatible software |
Supplied Equipment
| Transceiver | Yaesu FTDX101MP |
|---|---|
| Power Supply | Yaesu FPS-101 external AC power supply with integrated speaker |
| Microphone | Yaesu SSM-75G hand microphone |
| VC-Tune | Two units factory-fitted, MAIN and SUB |
| Roofing Filters | Standard filter complement as detailed above |
| Documentation | Manufacturer operating documentation and standard package documentation |
Installation and Operating Notes
Power: Connect the transceiver using the supplied FPS-101 power system. Do not substitute the conventional 13.8V station-power arrangement used with the FTDX101D.
Ventilation: Allow adequate clearance around the transceiver and power supply, particularly during sustained high-power transmission.
Antennas: Use a suitable 50-ohm antenna system rated for the intended operating frequency and power. Follow the manufacturer's matching and antenna-tuner guidance.
70MHz Operation: Availability of 70MHz transmission depends on the destination configuration and applicable amateur-radio authorisation. Consult the manufacturer and ML&S before assuming that modification or configuration changes are required or permitted.
Official Yaesu Documentation
Technical information is based on published manufacturer specifications. Refer to official documentation for complete operating instructions, safety requirements and configuration details.
View Manufacturer Catalogue (PDF) →Shipping & Delivery
We offer UK and international delivery services, including next working day and selected weekend options for eligible orders. Available services, prices and estimated delivery times are displayed at checkout.
Delivery Information
Delivery options depend on the parcel's size, weight, contents and destination. Express and weekend services are subject to availability and cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns & Cancellations
To arrange a return, please contact ML&S or complete our returns form. You may also exercise your statutory right to cancel by email or another clear statement, without completing the form.
Changed Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
You must notify us of your cancellation within this period and return the goods within a further 14 days.
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging, and all supplied accessories.
You may inspect goods as you would in a shop. Handling beyond what is necessary to inspect them may result in a lawful deduction for diminished value.
Exceptions
Modified Equipment & Reversal Charges
Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.
ML&S may charge a reasonable fee to reverse physical modifications and restore the equipment to its original factory specification. Any such charge will be agreed in advance and deducted from your refund.
Custom-Made Cable Assemblies
Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.
Software & Labour Charges
Labour and modification charges requested by the customer are non-refundable once the work has been completed.
Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods, where permitted by law. You may arrange your own suitable return postage or use one of our optional prepaid services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
For eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection included.
Larger Parcels
DPD Return Label
£7.95
Per parcel
For larger or heavier parcels and any shipments with batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to availability.
Prepaid return charges will be confirmed before booking and deducted from your refund.
These prices apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. ML&S will arrange a free return in these circumstances.
Refunds
Refunds are processed without undue delay following receipt and inspection of returned goods, and no later than 14 days after we receive goods returned under statutory cancellation rights.
Refunds will be issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised.
Warranty Terms & Conditions
New Equipment Warranty
Minimum 2-Year Warranty
All new products supplied by ML&S carry a minimum two-year warranty against manufacturing defects, excluding batteries, which are covered by separate warranty terms.
Some manufacturers provide extended warranties, such as the three-year warranty available on eligible Yaesu equipment. Any additional coverage is subject to the manufacturer's terms and conditions.
Our workshop may assess and repair faulty equipment on site or refer it to the manufacturer or an authorised service centre where necessary.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the UK. International customers must contact us before returning goods to confirm shipping and customs requirements.
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges resulting from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before return of the goods.
Need Help With a Return?
Our team can assist with returns, postage arrangements, modifications and warranty claims.
Nothing in these terms excludes or limits your statutory consumer rights.