Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599
Icom IC-7610
High-performance dual-receiver SDR transceiver with RF direct sampling, 110dB RMDR, dual spectrum scopes, 7-inch touchscreen and built-in automatic antenna tuner.
Includes the Icom SP-41 matching speaker, worth £164.95, and the Icom SM-30 desktop microphone, worth £132.
Whether you are dealing with poor band conditions or trying to pick a weak caller out of a large pile-up, receiver performance can make the difference between putting the QSO in the log and having to try again later.
The Icom IC-7610 combines two independent RF direct-sampling receivers with a representative 110dB RMDR, giving DXers and contest operators the performance needed to hear weak signals in the presence of much stronger adjacent stations.
Twin DIGI-SEL preselectors, dual band-pass filter networks and separate A/D converters feed the FPGA, while the large touchscreen, dual spectrum scopes, built-in ATU and extensive station connectivity make the IC-7610 equally capable as the centre of a serious home station.
Two independent RF direct-sampling receivers with separate signal paths.
Excellent ability to recover weak signals alongside powerful adjacent signals.
High-resolution colour display with dual spectrum scope and waterfall operation.
Frequency-based tuning memories automatically recall previously stored settings.
Two Independent High-Performance Receivers
Incoming RF signals are digitised by the A/D converters and immediately processed by the FPGA. By eliminating many of the analogue mixer stages used in conventional superheterodyne designs, RF direct sampling helps reduce unwanted distortion.
The IC-7610 uses two separate DIGI-SEL preselectors, two separate band-pass filter networks and two independent A/D converters, allowing MAIN and SUB to operate as genuinely independent receivers.
110dB RMDR
The IC-7610 achieves a representative 110dB RMDR at 2kHz separation, helping the receiver pull weak stations out from beside much stronger signals during busy contest and DX conditions.
MAIN and SUB Preselectors
Independent DIGI-SEL preselectors use sharp RF filtering to help prevent A/D converter overflow from powerful out-of-band signals and reduce higher-order intermodulation products.
Low Phase Noise VCXO
A customised low-phase-noise VCXO is used for the master clock, while a 10MHz reference signal can also be supplied externally when greater frequency precision is required.
Digital Up-Conversion for a Clean Transmitted Signal
Rather than generating the transmit signal by mixing a carrier with a local oscillator, the IC-7610 uses Digital Up-Conversion to generate the required signal through the Digital-to-Analogue Converter, helping provide a clean RF output.
7-inch Colour Touchscreen
The large 7-inch, 800 × 480 touchscreen provides operating information, simulated analogue meters, decoded RTTY and PSK31/63 messages and the IC-7610's high-speed dual spectrum scopes.
MAIN and SUB spectrum displays can be arranged horizontally or vertically, with a 100dB dynamic range and waterfall display making it easier to identify activity and locate weak signals.
Built for Serious HF Operating
- Independent MAIN and SUB receivers
- Dual high-speed spectrum scopes and waterfall displays
- 100dB spectrum scope dynamic range
- Audio scope with FFT and oscilloscope displays
- Built-in automatic antenna tuner
- Emergency tuner function
- High-quality internal speaker enclosure
- RTTY and PSK31/63 decoding
- SD card slot and USB storage support
- I/Q signal output through USB
- Ethernet connection for remote operation
- RS-BA1 remote control support
- DVI-D external display connection
- Optional RC-28 remote encoder support
- Transverter connection
- Diversity reception
Want to See More?
Download the official IC-7610 brochure for additional technical information and operating details.
Download the IC-7610 BrochureIcom IC-7610
IC-7610 General
Independent Dual RF Direct-Sampling Receivers
Two independent receiver chains use separate DIGI-SEL preselectors, band-pass filter networks and A/D converters feeding the FPGA. This allows true dual reception together with dual spectrum scopes and diversity reception.
Receiver Specifications
Published figures using P.AMP1 on HF and P.AMP2 on 50MHz where specified.
| Mode | Frequency | Sensitivity |
|---|---|---|
| AM | 0.1-1.8MHz | 6.3µV |
| AM | 1.8-30MHz | 2µV |
| AM | 50MHz | 1µV |
| FM | 28-29.7MHz | 0.5µV |
| FM | 50MHz | 0.32µV |
| SSB / CW | 1.8-30MHz | 0.16µV |
| SSB / CW | 50MHz | 0.13µV |
| Mode | Frequency | Sensitivity |
|---|---|---|
| AM | 1.8-3MHz | 16dBµV emf |
| AM | 3-30MHz | 6dBµV emf |
| AM | 50MHz | 0dBµV emf |
| FM | 28-29.7MHz | 0dBµV emf |
| FM | 50MHz | -6dBµV emf |
| SSB | 1.8-3MHz | 10dBµV emf |
| SSB | 3-30MHz | 0dBµV emf |
| SSB | 50MHz | -6dBµV emf |
RF Output & Modulation
Operating & Connectivity
- True dual independent receivers
- Dual DIGI-SEL preselectors
- Dual band-pass filter networks
- Dual spectrum scopes and waterfall displays
- 100dB spectrum scope dynamic range
- Diversity reception
- Audio scope with FFT and oscilloscope
- 7-inch 800 × 480 touchscreen
- Digital Up-Conversion transmitter architecture
- Built-in automatic antenna tuner
- Emergency tuner function
- 10MHz external reference input
- RTTY and PSK decoder
- Electronic keyer
- SD card slot
- USB flash drive support
- I/Q signal output
- Ethernet / LAN connection
- RS-BA1 remote operation support
- DVI-D external display output
- Optional RC-28 second VFO control
- Transverter connection
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]