Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599
Icom IC-7300MK2
The successor to the world-renowned IC-7300, with improved receiver and transmitter performance, lower power consumption, HDMI output, Ethernet remote operation, a built-in CW decoder and USB Type-C connectivity.
If you find a lower price from another authorised UK Icom dealer, call our sales team on 0345 2300 599 or email us and we'll match or beat the offer.
The Icom IC-7300MK2 builds on the radio that helped redefine affordable HF SDR performance. It retains Icom's RF direct-sampling architecture while introducing a range of improvements to receiver performance, transmitted signal quality, cooling, connectivity and remote operation.
Reciprocal Mixing Dynamic Range has been improved to approximately 105dB typical at 2kHz separation. Transmit phase-noise performance is also improved by approximately 12dB at 1kHz separation compared with the original IC-7300.
Power efficiency has also been improved. Typical receive standby current is reduced from approximately 0.9A to 0.7A, helping to reduce heat generation and maintain stable operation during long operating sessions and contests.
HDMI output, Ethernet connectivity, RX antenna IN/OUT connections, a built-in CW decoder and USB Type-C with dual virtual COM ports make the IC-7300MK2 considerably easier to integrate into a modern amateur radio station.
Improved weak-signal performance when operating close to strong adjacent signals.
Display frequency, scope, waterfall and menus on an external monitor, with audio output via HDMI.
RS-BA1 Version 2 remote operation without requiring a base-station PC at the radio.
Dual virtual COM ports plus audio input and output through a single USB connection.
Improved RMDR and Phase Noise
The IC-7300MK2 achieves approximately 105dB RMDR typical at 2kHz separation, improving its ability to recover weaker signals in the presence of strong nearby stations.
Transmit phase-noise characteristics are also improved by approximately 12dB at 1kHz separation compared with the previous model, reducing unwanted noise components in the transmitted signal.
Lower Heat Generation and Power Consumption
Through revised component selection and DC power optimisation, the IC-7300MK2 reduces heat generation during extended operation. Typical receive standby current has been reduced from approximately 0.9A to 0.7A.
External Display & Audio
Connect an external display to show frequency, scope, waterfall, menus and other operating information. Audio can also be passed through HDMI to compatible display speakers.
RX Antenna IN / OUT
Dedicated receive antenna connections allow alternative RX antennas, external band-pass filters and preamplifiers to be incorporated into the station.
Simplified RS-BA1 Remote Control
With its Ethernet connection, the IC-7300MK2 can be operated remotely using RS-BA1 Version 2 without requiring a base-station computer alongside the radio. The radio can also be remotely switched on or off through the network.
Built-In CW Decoder & USB Type-C
The built-in CW decoder can display received Morse code directly on the radio without requiring a PC or separate decoder. The decode filter automatically follows the target signal while keying speed is adjusted automatically.
USB Type-C provides two virtual COM ports together with audio input and output. This allows applications such as FT8 software, logging programs and contest software to operate simultaneously through one USB cable.
Key Features
- HF, 50MHz and 70MHz amateur band operation on the European version
- RF direct-sampling SDR architecture
- Approx. 105dB RMDR typical at 2kHz separation
- Improved transmit phase-noise characteristics
- Reduced heat generation and lower receive standby current
- 4.3-inch colour touchscreen
- Spectrum scope and waterfall display
- HDMI output for external display and audio
- RX antenna IN / OUT connections
- Ethernet connectivity
- RS-BA1 Version 2 remote operation
- Built-in CW decoder
- USB Type-C with dual virtual COM ports and audio I/O
- Built-in automatic antenna tuner
- SD card slot
- Preset FT8 configuration
Want to See More?
Download the official IC-7300MK2 brochure for additional information, features and specifications.
Download the IC-7300MK2 BrochureIcom IC-7300MK2
Improved RMDR and Phase Noise
Lower Heat and Power Consumption
Touchscreen SDR Operation
Designed for a Modern Digital Station
More Flexible Receiver Integration
Dedicated RX antenna IN and OUT connections allow external receive antennas, band-pass filters and preamplifiers to be connected without having to place them in the main transmit antenna path.
Built-In CW Decoder
Morse code can be decoded directly on the IC-7300MK2 without requiring an external computer. The decode filter automatically follows the target signal and the decoder automatically adjusts for keying speed.
IC-7300MK2 Operating Features
- HF, 50MHz and 70MHz operation on the European version
- 5MHz amateur band support on the European version
- RF direct-sampling SDR architecture
- 4.3-inch colour touchscreen
- Spectrum scope and waterfall display
- Improved RMDR
- Improved transmit phase-noise characteristics
- Lower receive standby current
- Reduced heat generation
- HDMI external display and audio output
- RX antenna IN / OUT connections
- Built-in Ethernet
- RS-BA1 Version 2 remote operation
- Remote power ON / OFF
- Built-in CW decoder
- USB Type-C connection
- Dual virtual COM ports
- USB audio input and output
- Built-in automatic antenna tuner
- SD card slot
- Preset FT8 configuration
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]