Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599Icom IC-R8600
High-performance wideband communications receiver covering 10kHz to 3GHz, with analogue and digital mode reception, FPGA signal processing, real-time spectrum scope and network remote control capability.
Purchase the IC-R8600 from ML&S and we'll include an Icom AD-55 PSU at no additional charge.
The Icom IC-R8600 is a serious wideband communications receiver covering an enormous 10kHz to 3GHz frequency range in tuning steps as fine as 1Hz.
Alongside conventional USB, LSB, CW, FSK, AM, synchronous AM, FM and WFM reception, the IC-R8600 can decode a range of digital voice systems including D-STAR, NXDN, dPMR, APCO P25 and DCR.
The receiver uses Icom's software-defined signal-processing technology, combining FPGA and DSP processing with a 14-bit A/D converter. Direct-sampling is used through the HF range, with conversion stages used as frequency increases through VHF, UHF and microwave coverage.
A 4.3-inch colour touchscreen, high-speed real-time spectrum scope, waterfall display, extensive memory system, SD card recording and optional network remote control make the IC-R8600 a highly capable receiver for monitoring, signal analysis and general communications use.
Extremely wide continuous frequency coverage with tuning steps down to 1Hz.
Receive D-STAR, NXDN, dPMR, P25 and DCR alongside conventional analogue modes.
High-resolution spectrum scope with waterfall, touch tuning and up to approximately 30 frames per second.
Extensive memory management with 100 groups, scan edges, skip channels and auto-memory write.
From HF to 3GHz
The IC-R8600 receives conventional USB, LSB, FSK, CW, AM, S-AM, FM and WFM signals together with several commonly encountered digital voice modes.
Supported digital formats include APCO P25 Phase 1, D-STAR, NXDN, dPMR and Japanese DCR, allowing one receiver to cover an exceptionally broad range of communications signals.
FPGA and DSP Demodulation
A 14-bit A/D converter operating at a 122.88MHz sampling rate feeds Icom's FPGA and DSP processing system. HF signals are directly sampled, while VHF and UHF signals are converted to intermediate frequencies before digital processing.
Extensive RF Filtering
The IC-R8600 uses 11 discrete RF band-pass filters on HF and 13 band-pass filters across VHF/UHF, helping reject strong unwanted signals before they can overload the receiver.
Published performance includes a +30dBm IP3 and 105dB dynamic range at 14.1MHz, with +10dBm IP3 at 144MHz and 0dBm at 440MHz.
Absolute Signal Strength
Select S-meter, dBµ, dBµ emf or dBm displays. Icom specifies ±3dB accuracy from 0.5-1100MHz and less than ±6dB from 1100-3000MHz.
4.3-inch Colour Display
Touchscreen operation combines operating information, spectrum display and menu functions with three multi-function control dials.
Real-Time Spectrum Scope with Waterfall
The real-time scope provides a display span of up to ±2.5MHz, approximately 30 frames per second maximum sweep speed and up to 110dB dynamic range at the specified narrow span.
Touch the spectrum or waterfall to tune directly to activity, or use Peak Search to identify signal peaks within the displayed range.
2000 Memories and Comprehensive Scanning
Up to 2000 regular memory channels can be divided across 100 groups, alongside scan-edge, skip and auto-memory write channels.
Program, fine program, Δf, priority, memory, selected memory and automatic memory write scans are supported, with memory scanning at up to approximately 100 channels per second.
Record Received Audio
Received audio can be recorded to an SD card in WAVE format. A 32GB card provides up to approximately 270 hours of recording capacity.
IP Network or USB
Optional RS-R8600 software allows most receiver functions, spectrum data and received audio to be accessed from a Windows PC over an IP network or USB connection.
Key Features
- 10kHz-3GHz wideband coverage
- 1Hz minimum tuning step
- USB, LSB, CW, FSK, AM, S-AM, FM and WFM reception
- D-STAR, NXDN, dPMR, APCO P25 and DCR digital reception
- 14-bit A/D converter with FPGA and DSP processing
- 11 HF and 13 VHF/UHF RF band-pass filters
- Real-time spectrum scope and waterfall
- 4.3-inch colour touchscreen
- Absolute RSSI measurement display
- 2000 regular memory channels
- Extensive scan functions
- SD card audio recording
- Screen capture function
- LAN and USB connectivity
- Optional RS-R8600 remote control
- I/Q signal output capability
- CI-V remote control
- NTP clock synchronisation
Icom IC-R8600
IC-R8600 General
Supported Digital Systems
Three Antenna Inputs
Receiver Architecture
| 0.01-30MHz | Direct sampling |
| 30-1100MHz | Double-conversion superheterodyne |
| 1100-3000MHz | Triple-conversion superheterodyne |
Published Sensitivity Figures
Filter Performance
| 0.1-30MHz | 70dB |
| 30-1100MHz | 50dB |
| 1100-2500MHz | 40dB |
| 2500-3000MHz | 40dB |
Receiver & Station Functions
- 4.3-inch colour touchscreen
- Real-time spectrum scope with waterfall
- Maximum scope span of ±2.5MHz
- Peak Search function
- Absolute RSSI measurement display
- IP+ function
- 11 HF and 13 VHF/UHF band-pass filters
- SD card audio recorder
- Screen capture to PNG or BMP
- LAN connection
- USB connection
- Optional RS-R8600 remote control software support
- I/Q signal output capability
- 10.7MHz IF output
- 12kHz IF output for external DRM decoding
- CI-V remote control
- RTTY decoder
- CTCSS and DTCS decoding with tone scan
- Digital AFC for FM, WFM and digital modes
- Voice synthesiser
- HPF / LPF, bass, treble and de-emphasis audio controls
- Clock and NTP functions
- Main dial friction adjustment
- Dial lock and panel lock
Delivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.






