CHELEGANCE Outdoor 868MHz LoRa Antenna Kit for Meshtastic / MeshCore, 5 / 8 dBi
SKU Part Number: CH0032637-EU
Complete EU868 Outdoor Antenna Kit CHELEGANCE EU868 LoRa Antenna Kit A complete outdoor 858–878 MHz antenna system for compatible Meshtastic...
Read More
As low as £39.95
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
Complete EU868 Outdoor Antenna Kit

CHELEGANCE EU868 LoRa Antenna Kit

A complete outdoor 858–878 MHz antenna system for compatible Meshtastic and MeshCore nodes and repeaters, available with your choice of 5 dBi or 8 dBi fibreglass antenna.

ML&S version supplied with 1 m LMR-400 low-loss feedline

Designed for permanent or semi-permanent EU868 installations, this kit combines a weather-resistant vertical antenna, mast-mounting hardware and a 1 m low-loss LMR-400 feedline terminating in RP-SMA male. The LMR-400 cable was specifically requested by ML&S in preference to the higher-loss RG-58 normally supplied with this antenna kit, helping preserve valuable link budget at 868 MHz.

EU868
858–878 MHz
Designed for compatible EU868 LoRa, Meshtastic and MeshCore installations.
TWO VERSIONS
5 or 8 dBi
Choose the antenna gain and physical length best suited to your installation.
LOW-LOSS FEEDLINE
1 m LMR-400
Supplied to ML&S specification with low-loss LMR-400 rather than the RG-58 normally supplied with this kit.
OUTDOOR INSTALLATION
Mast Clamp Included
Supplied with mounting hardware for installation on a suitable pole or mast.
ML&S-SPECIFIED LOW-LOSS CABLE

LMR-400 instead of RG-58

We specifically requested that our version of this antenna kit be supplied with a 1 m LMR-400 feedline rather than the RG-58 normally supplied with the standard kit. At frequencies around 868 MHz, reducing feedline loss helps deliver more of the transmitted signal to the antenna and more of the received signal back to the radio.

LMR-400
Approx. 0.13 dB/m
Representative Times Microwave attenuation at 900 MHz.
REPRESENTATIVE RG-58
Approx. 0.45 dB/m
Representative Belden RG-58 attenuation at 900 MHz.
Around 3.5× lower representative cable attenuation. The comparison above uses published 900 MHz cable specifications as a close reference for EU868 operation.

Cable figures are representative manufacturer specifications for the cable types themselves. Actual assembled feedline loss will also depend on connector construction and the finished cable assembly.

CHOOSE YOUR ANTENNA

5 dBi or 8 dBi

Both versions cover the same 858–878 MHz frequency range. Choose according to your required gain, antenna size and intended installation.

5 dBi VERSION
800 mm
More compact installation
SKU: CH0032637-EU-5DB
Specified gain: 5 ± 1 dBi
VSWR: <2.5
Specified efficiency: >75%
8 dBi VERSION
1300 mm
Higher specified gain
SKU: CH0032637-EU-8DB
Specified gain: 8 ± 1 dBi
VSWR: <2.5
Specified efficiency: >80%
CHELEGANCE EU868 5 dBi LoRa antenna measuring approximately 800 mm 5 dBi, 800 mm
CHELEGANCE EU868 8 dBi LoRa antenna measuring approximately 1300 mm 8 dBi, 1300 mm
COMPLETE CONNECTION PATH

N-Type antenna to RP-SMA device

The antenna uses an N-Type connection and the supplied 1 m LMR-400 cable terminates in RP-SMA male at the radio end. This makes the complete kit directly suited to compatible EU868 equipment using the required RP-SMA antenna connection without needing to assemble a separate feedline.

SENSECAP P1 PRO

An ideal companion for an outdoor mesh node

The RP-SMA connection makes this kit directly suitable for compatible devices such as the Seeed SenseCAP Solar Node P1 Pro, providing a straightforward way to move the antenna to a higher and more favourable position while keeping the node itself securely installed.

View SenseCAP P1 Pro
INSTALLATION

Height and location matter

Mount the antenna in a suitable elevated location with as clear a path to the surrounding coverage area as practical. Antenna height and site selection can be just as important to a successful LoRa link as the antenna's quoted gain.

Example elevated installation path for CHELEGANCE EU868 outdoor Meshtastic and MeshCore antenna
Higher gain does not guarantee a particular range

Actual coverage depends on the complete installation, including antenna height and selection, feedline loss, terrain, buildings and other obstructions, interference, radio configuration and applicable local regulations. Choose the antenna version that best suits the installation rather than relying on gain alone.

What's in the Box?

1 × selected 858–878 MHz fibreglass LoRa antenna, 5 dBi or 8 dBi
1 × ML&S-specified 1 m LMR-400 N-J to RP-SMA male antenna cable
1 × pole / mast mounting clamp assembly

Please note: mast, pole, Meshtastic / MeshCore device and other installation hardware are not included.

CHELEGANCE EU868 Outdoor LoRa Antenna Kit

Outdoor 858–878 MHz antenna system for compatible Meshtastic, MeshCore and EU868 LoRa equipment, available in 5 dBi and 8 dBi versions and supplied by ML&S with a 1 m LMR-400 feedline.

General Specifications

Frequency range 858–878 MHz
Nominal impedance 50 Ω
Polarisation Vertical linear
Antenna connection N-J
Device connection RP-SMA male
Feedline 1 m LMR-400, specifically requested for ML&S
Mounting Pole / mast clamp supplied

Variant Specifications

Specification 5 dBi 8 dBi
Manufacturer SKU CH0032637-EU-5DB CH0032637-EU-8DB
Specified gain 5 ± 1 dBi 8 ± 1 dBi
VSWR <2.5 <2.5
Antenna length 800 ± 10 mm 1300 ± 20 mm
Specified efficiency >75% >80%
Operating temperature −30 to +65 °C −30 to +65 °C
Salt spray test 48 hours 48 hours

Feedline Comparison

Cable Representative Attenuation at 900 MHz Use in this ML&S Kit
LMR-400 Approx. 0.13 dB/m Included
Representative RG-58 Approx. 0.45 dB/m Not supplied

Comparison note: figures above are representative published cable attenuation specifications at 900 MHz, used as a close comparison point for EU868 operation. Actual loss through a finished cable assembly will also depend on connectors and assembly construction.

Device Compatibility

Suitable for compatible Meshtastic, MeshCore and other EU868 LoRa equipment using the required RP-SMA antenna connection.

Directly suitable for the external antenna connection on the Seeed SenseCAP Solar Node P1 Pro. For other equipment, confirm the connector type and regional frequency configuration before purchase.

Installation Notes

Actual range depends on antenna selection, installation height, terrain, obstructions, feedline loss, interference, radio configuration and local regulations. A higher-gain antenna does not by itself guarantee greater useful coverage in every installation.

Package Contents

  • 1 × selected 858–878 MHz fibreglass antenna, 5 dBi or 8 dBi
  • 1 × ML&S-specified 1 m LMR-400 N-J to RP-SMA male feedline
  • 1 × pole / mast mounting clamp assembly

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.