Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599RigExpert MATCH Base
Start with comprehensive HF and 6m antenna analysis today, then unlock wider frequency coverage and advanced RF engineering tools later without replacing the analyser.
The RigExpert MATCH is a powerful upgradeable antenna and cable analyser designed for amateur radio, professional RF work and field diagnostics. The Base version provides coverage from 0.1 to 75MHz with current firmware, making it ideally suited to HF, 50MHz and general antenna and feeder testing.
Unlike a conventional analyser with permanently fixed capabilities, MATCH has been designed around an upgradeable licence system. You can start with the Base model and later unlock the Advanced 230MHz package or move all the way to the RFE 500MHz package as your requirements develop.
Its large 4.0-inch 480 × 480 colour TFT display, dedicated keypad and built-in Helper make complex antenna and cable measurements easier to interpret without sacrificing the deeper tools required for more advanced RF work.
One Analyser. Three Capability Levels.
Buy the capability you need now and unlock more later. The same MATCH hardware can progress from Base through Advanced and ultimately to the full RFE package.
The standard MATCH configuration with the essential antenna and cable measurement tools needed for HF and 50MHz work.
R/X chart
Return loss chart
SWR and MultiSWR meters
R, X, Z, L, C and Loss measurements
Self-test
Measurement memory
Expand MATCH into the VHF spectrum and unlock a substantial set of additional antenna and transmission-line tools.
Smith Chart
BLE Bluetooth
SWR2Air
Stub Tuner
Length vs Velocity Factor
Cable Loss
Cable Impedance
OSL calibration
MultiBand and additional charting tools
Quick Band
The full Radio Field Engineer configuration extends MATCH into UHF and adds the most advanced diagnostic functions.
500MHz frequency coverage
TDR chart
LC Meter
Multiple user OSL calibration profiles
Full higher-frequency diagnostic capability
Move from Advanced to RFE
If your MATCH already has the Advanced 230MHz licence installed, you do not need to buy the complete RFE licence again. Use the dedicated Advanced-to-RFE upgrade to unlock 500MHz operation and the additional RFE features.
If you have a Base MATCH and want 230MHz coverage, choose the Advanced Licence. If Advanced is already installed and you want to progress to 500MHz, choose the Advanced to RFE Licence. If you have a Base unit and want to go directly to the full 500MHz package, choose the RFE Licence.
See More Than Just SWR
MATCH can measure SWR, return loss, resistance, reactance, impedance, inductance and capacitance, giving you a much clearer picture of what an antenna or RF load is actually doing.
Measurements can be viewed numerically or through chart modes, making it easy to locate resonance, compare changes and identify behaviour across a selected frequency range.
More Useful as Your Licence Grows
The Base MATCH provides the core measurement functions required to examine antennas and feeders. The Advanced licence then unlocks specialist transmission-line tools including Stub Tuner, Length vs Velocity Factor, Cable Loss and Cable Impedance.
Move to RFE and the analyser adds Time Domain Reflectometry, providing a powerful additional method for investigating cable lengths, discontinuities and faults.
4.0-Inch 480 × 480 TFT
The large square colour display gives charts, markers and numerical information substantially more room than a conventional compact handheld analyser.
A dedicated waterproof keypad provides direct access to common functions, while the built-in Helper provides guidance directly on the analyser when required.
Ready for Repeatable RF Measurements
MATCH is factory calibrated and provides measurement memory for saving and recalling results. The analyser offers 250 unified memory slots for stored measurements.
Advanced and RFE licences add OSL calibration capability, while the RFE package provides additional user calibration profiles for more sophisticated measurement fixtures and workflows.
Designed for the Shack or the Field
Power comes from a rechargeable 2600mAh ICR18650 Li-Ion battery, providing up to approximately 2 hours 40 minutes of continuous measurement.
At just 93 × 207 × 37mm, the MATCH remains portable enough for antenna installation, portable operating and field troubleshooting while retaining a substantially larger display than many pocket analysers.
USB-C and AntScope2
A USB Type-C connection allows MATCH to communicate with a computer and work with RigExpert's AntScope2 software.
MATCH licence upgrades are activated through the RigExpert upgrade process using AntScope2 and an internet-connected computer. ML&S licence products are supplied with the activation information required for the selected upgrade.
Base Coverage Extended to 75MHz
Early MATCH documentation lists the Base frequency limit as 70MHz. RigExpert subsequently expanded the Base range to 75MHz through a firmware update. Keep the analyser firmware current to benefit from the latest functionality and improvements.
RigExpert MATCH
RigExpert MATCH Base Technical Information
Upgradeable antenna and cable analyser with Base operation to 75MHz using current firmware and optional Advanced 230MHz and RFE 500MHz licence packages.
| Manufacturer | RigExpert |
|---|---|
| Model | MATCH Base |
| ML&S SKU | MATCH-ANALYSER |
| Base frequency range | 0.1-75MHz with current firmware |
| Advanced frequency range | 0.1-230MHz with Advanced licence |
| RFE frequency range | 0.1-500MHz with RFE licence |
| Frequency entry resolution | 1kHz |
| RF connector | N-Type |
| RF output power | -10dBm at 50Ω load |
| Output impedance | 50Ω |
| Selectable system impedance | 25, 50, 75, 100, 150, 200, 300, 450 and 600Ω |
| SWR measurement range | 1-100 numerical modes / 1-10 chart modes |
| Base chart modes | SWR, R/X and Return Loss |
| Base meter functions | SWR, MultiSWR, R, X, Z, L, C and Loss |
| Smith Chart | Advanced and RFE licences |
| TDR Chart | RFE licence |
| Advanced cable tools | Stub Tuner, Length vs VF, Cable Loss and Cable Impedance |
| OSL calibration | Factory calibration standard; additional OSL functionality with Advanced/RFE |
| RFE user OSL profiles | Up to 10 profiles |
| LC Meter | RFE licence |
| BLE Bluetooth | Bluetooth LE 4.2, Advanced and RFE licences |
| SWR2Air | Advanced and RFE licences |
| Memory | 250 unified measurement slots |
| Display | 4.0-inch 480 × 480 colour TFT LCD |
| Controls | Waterproof keypad with built-in Helper |
| PC interface | USB Type-C |
| Battery | 1 × ICR18650 Li-Ion, 2600mAh |
| Continuous measurement time | Up to approximately 2 hours 40 minutes |
| Dimensions | 93 × 207 × 37mm |
| Weight | 363g with battery installed |
| Operating temperature | -10°C to +60°C |
MATCH Licence Upgrade Reference
| ML&S SKU | Upgrade | Result |
|---|---|---|
| MATCH-LICENSE-A | Base to Advanced | 230MHz Advanced |
| MATCH-LICENSE-A-TO-RFE | Advanced to RFE | 500MHz RFE |
| MATCH-LICENSE-RFE | Base directly to RFE | 500MHz RFE |
Delivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.







