Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599Seeed Studio SenseCAP MeshTracker X1
Card-sized Meshtastic device with dual-band L1 + L5 GNSS, Semtech LR2021 LoRa, IP66 protection, USB-C charging and up to 5 days of battery life.
The SenseCAP MeshTracker X1 is a compact Meshtastic GPS tracker designed for reliable off-grid communication and location sharing beyond mobile network coverage.
Seeed describes the X1 as the world's first card-sized Meshtastic device with dual-band GPS. Its slim 90 x 57 x 8mm body combines a dual-band L1 + L5 GNSS receiver, built-in barometer, Bluetooth 5.0 and the latest Semtech LR2021 LoRa chipset in a rugged IP66-rated enclosure.
With a built-in 1100mAh rechargeable battery, internal GNSS, LoRa and Bluetooth antennas, vibration and buzzer alerts, and USB-C connectivity, the MeshTracker X1 is designed to be easy to carry and ready for outdoor adventures, events, emergency communication and everyday Meshtastic use.
Dual-band satellite positioning is combined with a built-in barometer for more reliable location and altitude awareness.
Next-generation LoRa chipset supporting 863 to 928MHz operation with up to 22dBm transmit power.
Integrated 1100mAh rechargeable battery provides up to five days of runtime depending on configuration and use.
Dust and water protection for use in rain, dusty trails and other demanding outdoor environments.
A Meshtastic Device You Can Actually Carry
At only 90 x 57 x 8mm and approximately 45g, the MeshTracker X1 is designed around genuine everyday portability rather than being another development board that needs a separate enclosure and battery.
It can be worn on a lanyard, attached to a backpack or bike bag, or simply carried in a pocket, making it suited to hiking, cycling, outdoor events and other situations where cellular coverage cannot be relied upon.
Dual-Band L1 + L5 GNSS
MeshTracker X1 uses dual-band L1 + L5 GNSS rather than a basic single-band receiver, providing more robust positioning capability for location sharing over a Meshtastic network.
A built-in air-pressure sensor adds barometric altitude information, while position data can be shared with other nodes through Meshtastic.
Powered by Semtech LR2021
At the heart of the X1's radio system is the Semtech LR2021, supporting operation across 863 to 928MHz with a maximum transmit power of 22dBm.
Seeed specifies sensitivity down to -141dBm and FLRC data rates of up to 2.6Mbps. The newer radio platform is also intended to provide a foundation for possible future higher-data-rate features such as voice and image transmission.
In Seeed's 915MHz open line-of-sight testing, communication distances of up to 8km were achieved. Actual range will vary significantly with frequency, terrain, obstructions, antenna orientation, interference and network configuration.
Vibration and Sound Alerts
A built-in vibration motor and buzzer provide flexible notification options for incoming activity and device status.
This allows the X1 to remain noticeable in noisy environments while also offering a temporary mute function when audible alerts are not appropriate.
USB-C with 1100mAh Battery
The built-in 1100mAh rechargeable battery provides up to five days of runtime while keeping the device thin enough for everyday carry.
A standard USB Type-C connection is used for charging, firmware updates and debugging.
Key Features
- Card-sized Meshtastic GPS tracker
- Dual-band L1 + L5 GNSS
- Semtech LR2021 LoRa chipset
- 863 to 928MHz hardware frequency range
- Up to 22dBm transmit power
- Bluetooth 5.0
- Nordic nRF52840 main controller
- Built-in barometric pressure sensor
- Built-in vibration motor and buzzer
- RGB status LED
- Internal GNSS, LoRa and Bluetooth antennas
- IP66 dust and water protection
- 1100mAh rechargeable battery
- Up to 5 days of battery life
- USB-C charging and firmware interface
- 90 x 57 x 8mm card-sized enclosure
- Approx. 45g device weight
Designed for Off-Grid Communication
Share location and messages through a Meshtastic mesh where cellular coverage may be unavailable.
Compact dimensions and low weight make the X1 easy to attach to a pack or bike bag.
Useful for teams and groups operating across large sites where independent messaging and position sharing are valuable.
Provides an additional off-grid communication option when conventional mobile infrastructure is unavailable.
Seeed Studio SenseCAP MeshTracker X1
General
Barometer and Temperature
Battery and Charging
Controls and Alerts
Button Functions
LED Indications
- Green constant: device turning on
- Green fast blinking: normally running
- Green slow blinking: charging
- Green constant while charging: fully charged
- Red blinking: low power
- White constant: DFU / bootloader mode
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]