OM Power OM2501HF 2.5kW Manual-Tune HF Linear Amplifier with GU84B
SKU Part Number: OM-2501HF-GU84B
2.5kW Manual-Tune HF Amplifier OM Power OM2501HF A high-power 2.5kW HF linear amplifier using a single GU84B ceramic tetrode, with manual PA...
Read More
£4,299.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
2.5kW Manual-Tune HF Amplifier

OM Power OM2501HF

A high-power 2.5kW HF linear amplifier using a single GU84B ceramic tetrode, with manual PA tuning, full QSK, comprehensive protection and a 4.3in colour touchscreen.

SSB / CW OUTPUT
2,500W
High-power HF output across 1.8 to 29.7MHz.
RTTY / AM / FM
2,000W
Manufacturer-rated output for higher-duty-cycle modes.
POWER STAGE
1 × GU84B
High-power ceramic tetrode.
DRIVE POWER
Typically 30-60W
Approximately 17dB power gain.
Traditional Manual Tuning, Modern Protection

Direct Control of a 2.5kW Ceramic-Tetrode Amplifier

The OM Power OM2501HF is a manually tuned HF amplifier designed for amateur bands from 1.8 to 29.7MHz, including WARC allocations.

This ML&S version uses the GU84B ceramic tetrode, combining the familiar control of a manually tuned valve amplifier with touchscreen monitoring, automatic bias setup, extensive protection and programmable cooling.

GU84B Ceramic Tetrode

One High-Power RF Device

This OM2501HF variant uses a single GU84B ceramic tetrode to deliver up to 2.5kW in SSB and CW.

OM Power's automatic bias-setting system simplifies tube replacement by establishing the required anode-current bias without a separate manual adjustment procedure.

Manual PA Tuning

Hands-On Tune and Load Control

Unlike OM Power's automatic A-series amplifiers, the OM2501HF uses manual RF output-network tuning. The operator sets the amplifier correctly for the selected frequency and load before transmitting at high power.

This gives experienced operators direct control of the tuned RF stage while retaining modern monitoring and protection around the high-voltage amplifier system.

Important Installation Note

Manual Amplifier Tuning Is Not an Antenna Tuner

The TUNE and LOAD controls adjust the amplifier's own output network. They do not replace an external antenna matching unit. The antenna, feeder, switches and connectors must present a suitable load and be rated appropriately for the intended RF power.

High Power Gain

Full Output from Around 30-60W Drive

With approximately 17dB gain, the OM2501HF normally requires only around 30 to 60W of RF drive for full output, depending on frequency, tuning and load conditions.

RF Performance

High-Power HF Operation

OM Power specifies 2,500W output in SSB and CW and 2,000W in RTTY, AM and FM.

Intermodulation distortion is specified at approximately -32dB below nominal output, with harmonic suppression better than -50dBc.

Load Protection

Automatic Protection Against Excessive Reflected Power

The OM2501HF is specified for a maximum output SWR of 3:1. If reflected power reaches approximately 350W or more, the amplifier automatically switches to STBY.

Input impedance is 50 ohms, with input VSWR specified below 1.5:1.

Comprehensive Protection

Monitoring the Entire Power Amplifier

Protection systems monitor SWR, anode current and voltage, screen current and voltage, grid current and voltage, heater voltage, PA tuning and operating temperature.

Soft-start circuitry reduces mains inrush stress, while a safety interlock prevents normal switch-on with the amplifier opened. Faults and warnings are retained in memory for easier diagnosis and servicing.

QSK
Full Break-In
Full QSK operation is supported for operators requiring rapid CW transmit and receive switching.
COOLING
Dual Blower System
A centrifugal blower and additional axial blower manage heat from the tube and power supply.
DISPLAY
4.3in Colour Touchscreen
Operating parameters, protection status, warnings and stored faults are displayed clearly at the front panel.
Cooling Control

Three Programmable Axial-Blower Modes

The axial blower can be configured using three operating modes, allowing cooling behaviour to be selected according to the expected operating conditions.

High-Power Mains Supply

Dual 2kVA Toroidal Transformers

The OM2501HF uses two 2kVA toroidal transformers. Primary settings are switchable between 220/230/240V at 50Hz or 230/240/250V at 60Hz.

Other primary arrangements may be available for specific markets. The electrical installation must be suitable for the amplifier's high mains demand and comply with OM Power's installation instructions and applicable electrical regulations.

WIDTH
485mm
Full-size high-power amplifier chassis.
HEIGHT
200mm
Allow additional space for cooling airflow.
DEPTH
455mm
Allow rear clearance for connections and ventilation.
WEIGHT
Approx. 40kg
Requires a suitably strong and stable operating position.
Operating Power

Use Within Your Licence Conditions

The OM2501HF's maximum output capability may exceed the transmit power permitted by an operator's amateur-radio licence. Output power must always be set and operated within applicable licence conditions and local regulations.

Manuals & Firmware

OM2501HF Downloads

OM Power provides the OM2501HF user manual, firmware-upgrade instructions, firmware loader and current firmware files through its official download centre.

View OM Power Downloads
Technical Specification

OM Power OM2501HF GU84B

Manual-tune 2.5kW HF linear amplifier using one GU84B ceramic tetrode, with full QSK, touchscreen monitoring, programmable cooling and comprehensive protection.

Amplifier Type Manual-tune ceramic-tetrode HF linear amplifier
Frequency Coverage Amateur bands from 1.8 to 29.7MHz including WARC bands
SSB / CW Output 2,500W
RTTY / AM / FM Output 2,000W
Typical Drive Power Approximately 30-60W for full output
Power Gain 17dB
Input Impedance 50 ohms
Input VSWR Less than 1.5:1
Output Impedance 50 ohms unbalanced
Maximum Output SWR 3:1
SWR Protection Automatic STBY when reflected power reaches 350W or higher
Intermodulation Distortion -32dB below nominal output
Harmonic Suppression Better than -50dBc

RF Power Stage

Tube 1 × GU84B ceramic tetrode
PA Tuning Manual
Automatic Bias Setup Supported following tube replacement
QSK Full break-in operation

Protection & Monitoring

VSWR too high
Anode current too high
Anode voltage error
Screen current too high
Screen voltage error
Grid current too high
Grid voltage error
Heater voltage error
PA mistuning
Temperature too high
Soft-start protection
Open-cover switch-on interlock
Power Supply High-voltage mains supply with two 2kVA toroidal transformers
50Hz Primary Settings 220 / 230 / 240V
60Hz Primary Settings 230 / 240 / 250V
Transformers 2 × 2kVA toroidal transformers
Cooling Centrifugal blower plus axial blower
Display 4.3in colour touchscreen
Dimensions 485 × 200 × 455mm, width × height × depth
Approx. Weight 40kg
Fault Memory Fault and warning history stored for maintenance and diagnosis
Axial Blower Control Three programmable operating modes

Manufacturer Documentation

Download the OM2501HF user manual, firmware-upgrade instructions, firmware loader and current firmware releases directly from OM Power.

View OM Power Downloads

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.