AOR AR-DV1 Wideband Communications Receiver
SKU Part Number: AR-DV1
The AOR AR-DV1U wideband communications receiver covers 100 kHz to 1300 MHz in traditional analogue modes (SSB, CW, AM, FM, S-FM, W-FM) as well as...
Read More
£1,249.99 £1,041.66
Availability: In stock
call

Seen this product cheaper elseware?

Call 0345 2300 599

The AOR AR-DV1U wideband communications receiver covers 100 kHz to 1300 MHz in traditional analogue modes (SSB, CW, AM, FM, S-FM, W-FM) as well as various digital modes. In fact, we know of no other radio in this category that can decode Icom's D-Star mode, Yaesu's new C4FM mode, Alinco's digital mode, NXDN (note: 6.25 kHz only), P25 Phase 1, etc. Interesting features include:  2000 Memories (in 40 banks of 50), Memory Scan, AM Synchronous Detection, Noise Reduction, Notch, Digital Data Display, Clock, Calendar, Alarm, Timer. The SD/SDHC jack supports logging functions. There is also a micro USB port. This radio will support field firmware updating. High performance is achieved since the receiver employs direct conversion below 18 MHz and triple conversion superheterodyne above 18 MHz.

This very compact radio is only 7.1 x 2 x 8.5 inches (178×50×215mm). The rear panel features a single BNC antenna jack, speaker jack, aux jack and 12 VDC input jack. Please note that AOR receivers, including the AR-DV1, do not support trunk-tracking. 

RF Gain on Page 9 in the Operrating Manuals

To activate the manual RF gain control, press the [F] key and then the [5] key. 
Rotate the dial knob to select “RF-G”.
To change the RF gain manually, rotate the squelch knob. To cancel the manual RF gain control,
repeat the steps above. 
(Note: The manual RF gain control is not available while the receiver is in AGC mode.) 

CLICK HERE FOR FIRMWARE UPDATE


The AOR AR-DV1U wideband communications receiver covers 100 kHz to 1300 MHz in traditional analogue modes (SSB, CW, AM, FM, S-FM, W-FM) as well as various digital modes. In fact, we know of no other radio in this category that can decode Icom's D-Star mode, Yaesu's new C4FM mode, Alinco's digital mode, NXDN (note: 6.25 kHz only), P25 Phase 1, etc. Interesting features include:  2000 Memories (in 40 banks of 50), Memory Scan, AM Synchronous Detection, Noise Reduction, Notch, Digital Data Display, Clock, Calendar, Alarm, Timer. The SD/SDHC jack supports logging functions. There is also a micro USB port. This radio will support field firmware updating. High performance is achieved since the receiver employs direct conversion below 18 MHz and triple conversion superheterodyne above 18 MHz.

This very compact radio is only 7.1 x 2 x 8.5 inches (178×50×215mm). The rear panel features a single BNC antenna jack, speaker jack, aux jack and 12 VDC input jack. Please note that AOR receivers, including the AR-DV1, do not support trunk-tracking. 

RF Gain on Page 9 in the Operrating Manuals

To activate the manual RF gain control, press the [F] key and then the [5] key. 
Rotate the dial knob to select “RF-G”.
To change the RF gain manually, rotate the squelch knob. To cancel the manual RF gain control,
repeat the steps above. 
(Note: The manual RF gain control is not available while the receiver is in AGC mode.) 

CLICK HERE FOR FIRMWARE UPDATE

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]