Messi & Paoloni AIRBORNE 10 Direct Burial Coax
SKU Part Number: RG-MP-AIRBORNE10
Ultra-Light Direct-Burial 10.3mm Low-Loss Coax Messi & Paoloni...
Read More
£3.05
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
Ultra-Light Direct-Burial 10.3mm Low-Loss Coax

Messi & Paoloni AIRBORNE 10 /.400"

Exceptionally low-loss 50 ohm coax with a waterproof direct-burial PE jacket, A++ screening and outstanding performance at only 7.1kg per 100 metres.

Try our Custom Coax Builder

Choose your cable length and connector combination and let us build the lead for you.

Ordering 100 metres or more? Save 10% on the cable.
Maximum Performance Without the Weight

Lower loss than RG213. Far lower loss than RG-8X. Around 45% lighter than a typical 10.3mm coax.

AIRBORNE 10 combines exceptionally low attenuation with a rugged waterproof polyethylene jacket and remarkably low weight, making it ideal for permanent outdoor feeds, long runs and installations where cable weight matters.

Messi & Paoloni AIRBORNE 10 /.400" is a high-performance 10.3mm coaxial cable developed around three priorities: very low attenuation, exceptionally low weight and serious outdoor durability.

M&P describes AIRBORNE 10 as delivering the best attenuation it has tested in a 10.3mm coaxial cable. At the same time, the cable weighs only 7.1kg per 100 metres, approximately 45% less than an average 10.3mm cable.

Its UV-resistant polyethylene outer jacket is designed for direct burial and outdoor use, making AIRBORNE 10 an excellent choice where the feed line needs to run underground, across exposed areas or over a significant distance.

PERFORMANCE
Exceptional Low Loss

M&P describes AIRBORNE 10 as having the best attenuation it has tested in a 10.3mm coax.

INSTALLATION
Direct Burial

Tough UV-resistant polyethylene jacket is waterproof and designed for permanent underground and outdoor installation.

WEIGHT
Only 7.1kg per 100m

Around 45% lighter than a typical 10.3mm coax, reducing cable load and making long runs considerably easier to handle.

VELOCITY FACTOR
87%

Triple-layer physically foamed polyethylene dielectric provides excellent RF efficiency from HF well into the microwave spectrum.

Ultra-Low Loss

Outstanding 10.3mm Coax Performance

AIRBORNE 10 delivers exceptionally low attenuation despite its lightweight construction.

At 20°C, M&P specifies loss of only 1.3dB per 100m at 14MHz, 2.4dB at 50MHz, 4.2dB at 144MHz, 7.6dB at 430MHz, 13.6dB at 1296MHz and just 19.2dB at 2400MHz.

That makes AIRBORNE 10 particularly attractive for longer feed lines and higher-frequency operation, where every additional dB lost in the coax directly reduces both transmitted and received signal levels.

Cable Comparison

See the Difference Against RG213 and RG-8X

AIRBORNE 10 offers considerably lower attenuation than traditional RG213/U despite being the same general cable diameter, while the improvement over RG-8X is even greater.

Frequency AIRBORNE 10 Typical RG213/U Typical RG-8X
50MHz 2.4dB / 100m Approx. 4.6dB / 100m Approx. 6.6dB / 100m
100MHz 3.5dB / 100m Approx. 6.6dB / 100m Approx. 9.8dB / 100m
400MHz 7.2dB / 100m Approx. 14.1dB / 100m Approx. 19.7dB / 100m

RG213/U and RG-8X figures are representative values and may vary between individual manufacturers and cable constructions.

Outdoor Installation

Waterproof and Designed for Direct Burial

Unlike ordinary PVC-jacket coax, AIRBORNE 10 uses a UV-shielded polyethylene outer jacket specifically designed for outdoor use and direct burial.

M&P describes the cable as completely waterproof and highlights the excellent tear resistance of the PE sheath. This makes it particularly useful for permanent antenna installations where the feed line needs to cross a garden, run underground or remain exposed to the weather.

No Separate Conduit Required for Cable Protection

AIRBORNE 10 is specifically manufactured as a waterproof direct-burial coax. Normal good installation practice should still be followed, particularly around connectors, entry points and areas where the cable could suffer mechanical damage.

Lightweight Construction

Remarkably Light for a 10.3mm Coax

One of AIRBORNE 10's biggest practical advantages is its weight.

At only 7.1kg per 100 metres, M&P states that it is approximately 45% lighter than the average 10.3mm cable.

That makes a noticeable difference when installing long runs, carrying cable for portable or DX operation, shipping large quantities or supporting a vertical feed line on a mast or tower.

Cable Construction

Lightweight Copper-Clad Aluminium Construction

The centre conductor is a 2.78mm copper-clad aluminium conductor. This construction substantially reduces cable weight while still providing the RF performance required by the design.

The first screen is a 100% copper foil with an applied polyethylene layer designed to prevent cracking during short-radius bends.

Over this sits M&P's heavy-duty 192-wire copper-clad aluminium reactive braid with approximately 85% coverage.

Reactive Screening

192-Wire Reactive Braid

The reactive braid is manufactured on a 24-spool machine rather than the more conventional 16-spool process.

This creates approximately 50% more crossover points, allowing the braid to react to bending and twisting in a spring-like manner while maintaining excellent screening performance.

M&P also highlights the exceptionally thick 192-wire braid as helping to reduce background noise in demanding RF installations.

RF Isolation

A++ Screening Performance

AIRBORNE 10 provides screening efficiency greater than 105dB between 100MHz and 2000MHz, giving it M&P's A++ screening classification.

The combination of full copper foil and the dense reactive braid helps minimise both unwanted signal ingress and RF radiation from the feed line.

High-Power Operation

Excellent Power Handling

Despite its remarkably low weight, AIRBORNE 10 is capable of serious transmit power.

At a cable temperature of 40°C, M&P specifies continuous power handling of approximately 5180W at 14MHz, 2939W at 50MHz, 1710W at 144MHz and 944W at 430MHz.

Maximum Peak Power
14,500W Maximum Peak Power

M&P specifies a maximum peak-power rating of 14.5kW. Continuous power handling varies with frequency and cable temperature, so the detailed ratings should be followed for demanding high-power installations.

Applications

Where AIRBORNE 10 Works Best

UNDERGROUND
Direct-Burial Feed Lines

Waterproof PE jacket makes it ideal for permanent underground runs between the shack and antenna.

LONG RUNS
Long Cable Runs

Exceptionally low attenuation helps preserve transmitted power and weak received signals over substantial distances.

VHF / UHF
VHF and UHF

Excellent attenuation figures make AIRBORNE 10 particularly effective as operating frequency increases.

2.4GHz
QO-100 and 2.4GHz

Only 19.2dB/100m attenuation at 2400MHz makes it an excellent choice for short low-loss QO-100 transmit feed lines.

PORTABLE
Portable and DX Stations

Extremely low weight makes transporting substantial lengths much easier than conventional 10.3mm coax.

POWER
High-Power Stations

Strong continuous-carrier ratings and a 14.5kW peak specification suit demanding amplifier installations.

Selecting Cable Length

M&P Cable Length Guidance

M&P provides the following transmitting guidance for AIRBORNE 10. These figures indicate lengths at which M&P rates performance as Excellent or Good and are not absolute operating limits.

Frequency Excellent Good
14MHz Up to 100m Up to 160m
28MHz Up to 75m Up to 120m
50MHz Up to 60m Up to 80m
144MHz Up to 35m Up to 60m
430MHz Up to 20m Up to 30m
1296MHz Up to 12m Up to 18m
2400MHz Up to 8m Up to 12m
Cable Design

Cable Construction

  • 2.78mm copper-clad aluminium centre conductor
  • Triple-layer high-pressure physically foamed polyethylene dielectric
  • 100% copper foil first screen with applied PE layer
  • 85% coverage reactive braid
  • 192 copper-clad aluminium braid wires manufactured using 24 spools
  • UV-resistant polyethylene outer jacket
  • Waterproof and suitable for direct burial
  • 10.3mm overall cable diameter
  • 87% velocity factor
  • A++ screening efficiency greater than 105dB from 100 to 2000MHz
  • Maximum peak power 14,500W
Manufacturer Documentation

AIRBORNE 10 Datasheet

View AIRBORNE 10 Datasheet
Product Information

AIRBORNE 10 /.400" Technical Specifications

Specifications

General

Official Model AIRBORNE 10 /.400"
Nominal Impedance 50 ohms ±3 at 200MHz
Overall Diameter 10.3mm ±0.15mm
Velocity Factor 87%
Capacitance 74pF/m ±2
Screening Efficiency Greater than 105dB, 100 to 2000MHz
Screening Class A++
Operating Temperature -45°C to +70°C
Net Weight 7.1kg per 100m
Maximum Peak Power 14,500W
Spark Test 8kV
Direct Burial Yes
Waterproof Yes
Cable Design

Construction

Inner Conductor Copper-clad aluminium
Inner Conductor Diameter 2.78mm ±0.05mm
Dielectric Triple-layer high-pressure physically foamed polyethylene
Dielectric Diameter 7.3mm ±0.05mm
First Screen 100% copper foil with applied PE layer
Reactive Braid 85% coverage, 192 copper-clad aluminium wires, 24-spool construction
Outer Jacket UV-resistant polyethylene for direct burial and outdoor use
Inner Conductor Resistance 4.4 ohms/km
Outer Conductor Resistance 12 ohms/km
Flexibility

Minimum Bend Radius

Repeated Bending

103mm for up to 15 bends

Single Bend / Choke

65mm

Return Loss

Structural Return Loss

0.3 to 600MHz Greater than 30dB
600 to 1200MHz Greater than 25dB
1200 to 2000MHz Greater than 20dB
RF Loss

Attenuation at 20°C

Frequency Loss dB/100m
1.8MHz0.6dB
3.5MHz0.8dB
7MHz1.0dB
10MHz1.2dB
14MHz1.3dB
21MHz1.7dB
28MHz1.9dB
50MHz2.4dB
100MHz3.5dB
144MHz4.2dB
200MHz5.0dB
400MHz7.2dB
430MHz7.6dB
800MHz10.4dB
1000MHz11.8dB
1296MHz13.6dB
2400MHz19.2dB
3000MHz21.6dB
4000MHz25.6dB
5000MHz29.2dB
6000MHz32.8dB
7000MHz35.6dB
8000MHz38.6dB
10000MHz44.6dB
12000MHz50.2dB
RF Power

Continuous Power Handling at 40°C

Frequency Maximum Continuous Power
1.8MHz10,831W
3.5MHz8,471W
7MHz6,667W
10MHz6,000W
14MHz5,180W
21MHz4,114W
28MHz3,731W
50MHz2,939W
100MHz2,045W
144MHz1,710W
200MHz1,440W
400MHz992W
430MHz944W
800MHz692W
1000MHz610W
1296MHz529W
2400MHz375W
3000MHz333W
4000MHz281W
5000MHz247W
6000MHz220W
7000MHz202W
8000MHz187W
10000MHz161W

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.