Messi & Paoloni ULTRAFLEX 10/C Sahara Coax
SKU Part Number: RG-MP-ULT10-SAHARA
White 10.3mm High-Power Low-Loss 50 Ohm Coax Messi & Paoloni ULTRAFLEX...
Read More
£3.80
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
White 10.3mm High-Power Low-Loss 50 Ohm Coax

Messi & Paoloni ULTRAFLEX 10/C Sahara

Exceptionally flexible premium coax with far lower loss than conventional RG213/U and RG-8X, plus a white UV-resistant jacket designed for hot, exposed and high-power installations.

Try our Custom Coax Builder

Choose your cable length and connector combination and let us build the lead for you.

Ordering 100 metres or more? Save 10% on the cable.
Serious Coax Performance

Far lower loss than RG213. Dramatically lower loss than RG-8X.

ULTRAFLEX 10/C Sahara combines outstanding RF performance with the flexibility of a stranded centre conductor and a white jacket designed to help control solar heating.

Messi & Paoloni ULTRAFLEX 10/C Sahara is a premium 10.3mm 50 ohm coaxial cable designed for stations where low loss, flexibility, high power handling and dependable performance matter.

It is a substantial performance upgrade from traditional RG213/U. Both cables are around the same overall diameter, but ULTRAFLEX 10/C Sahara uses a modern physically foamed dielectric, full copper foil screen and high-performance reactive braid to deliver considerably lower attenuation.

Compared with RG-8 Mini / RG-8X, the difference is even greater. RG-8X may be convenient to handle, but its higher losses become increasingly noticeable as frequency and cable length rise. ULTRAFLEX 10/C Sahara retains far more of your transmitted power and received signal.

PERFORMANCE
Far Lower Loss Than RG213

A major RF performance improvement over conventional RG213/U while retaining a familiar 10mm-class cable size.

UPGRADE
Huge Upgrade from RG-8X

Dramatically lower attenuation than typical RG-8X, particularly on VHF, UHF and longer feed-line runs.

SAHARA
White Sahara Jacket

UV-resistant white PVC helps reduce solar heating compared with a conventional black cable exposed to direct sunlight.

VELOCITY FACTOR
87%

High-pressure physically foamed polyethylene dielectric provides excellent RF efficiency across HF, VHF and UHF.

Cable Comparison

See the Difference Against RG213 and RG-8X

The advantage becomes particularly clear when the attenuation figures are compared directly. Lower dB figures mean less of your signal is being lost as heat in the feed line.

Frequency ULTRAFLEX 10/C Sahara Typical RG213/U Typical RG-8X
50MHz 2.6dB / 100m Approx. 4.5dB / 100m Approx. 6.6dB / 100m
100MHz 3.8dB / 100m Approx. 6.8dB / 100m Approx. 9.8dB / 100m
400MHz 8.2dB / 100m Approx. 14.5dB / 100m Approx. 19.7dB / 100m

RG213/U and RG-8X figures are representative values and may vary between manufacturers and individual cable constructions.

Why Upgrade?

If you are currently using RG213, ULTRAFLEX 10/C Sahara can significantly reduce feed-line loss without increasing the overall cable diameter.

If you are replacing RG-8X, the improvement is even more substantial, particularly on 6m, 2m and 70cm where coaxial cable loss becomes increasingly important.

Sahara White Jacket

Why the Sahara White Jacket Matters

The white jacket is not simply a cosmetic alternative. M&P developed the Sahara range because coaxial cable attenuation changes as temperature rises.

A black cable lying in direct sunlight can reach a substantially higher temperature than the surrounding air. Even when the operator and radio equipment are comfortably in the shade, the feed line may be sitting in full sun for hours.

ULTRAFLEX 10/C Sahara uses a UV-resistant white PVC jacket which absorbs less solar energy than a conventional black jacket. This helps reduce solar heating and can help the cable maintain more consistent RF performance in hot and exposed installations.

White Can Make Sense in the UK Too

The white jacket is also useful where coax is routed along light-coloured walls, fascia boards, conservatories or other surfaces where black cable would be considerably more conspicuous.

High-Power Operation

Developed with High-Power Operation in Mind

High RF power generates additional heat in the feed line, making cable temperature particularly important during high-duty-cycle operation.

M&P reports laboratory testing using 1kW of continuous-carrier FT8 for several hours. During this testing, the operating temperature of the Sahara design reduced considerably and stabilised at more suitable levels.

This makes ULTRAFLEX 10/C Sahara particularly attractive for contest stations, digital modes and installations using linear amplifiers for sustained periods.

Power Handling
Up to 12,000W Peak Power

M&P specifies a maximum peak-power rating of 12,000W. Continuous power capability depends on operating frequency and cable temperature, so the detailed power-handling figures in the Product Information tab should be used when planning a high-power installation.

Flexible Construction

Exceptional Flexibility for a 10.3mm Cable

M&P describes ULTRAFLEX 10/C Sahara as its most flexible 10.3mm coaxial cable, making it particularly useful where a conventional heavy feed line would be awkward to route.

Instead of a solid centre conductor, it uses 7 x 1.0mm copper wires with an overall conductor diameter of approximately 2.9mm.

This construction gives the cable the flexibility needed for antenna rotators, tight cable routes and shack interconnections while retaining excellent low-loss performance.

The specified minimum bend radius is 80mm for repeated bending and only 40mm for a single bend or choke.

M&P Construction

M&P Reactive Copper Braid

The outer conductor uses a 144-wire copper reactive braid with approximately 71% coverage, manufactured on a 24-spool braiding machine.

Compared with a conventional 16-spool process, this creates approximately 50% more crossover points. M&P describes the resulting braid as reacting to twisting and bending like a spring, helping provide both flexibility and excellent screening performance.

Beneath the braid is a 100% copper foil first screen with an applied polyethylene layer designed to prevent cracking during short-radius bends.

RF Isolation

Excellent RF Screening

The copper foil and reactive braid combination provides a specified screening efficiency greater than 105dB between 100MHz and 2000MHz. This helps minimise unwanted signal ingress and radiation from the feed line.

Applications

Where ULTRAFLEX 10/C Sahara Works Best

LONG RUNS
Long Feed Lines

Very low attenuation helps preserve signal over substantial distances between the shack and antenna.

POWER
High-Power Stations

Excellent power handling makes it well suited to stations using linear amplifiers and demanding operating modes.

DIGITAL
FT8 and Digital Modes

Particularly useful where sustained high-duty-cycle operation places additional thermal stress on the feed line.

MOVEMENT
Rotator Antennas

Excellent flexibility for a 10.3mm coax makes it a strong choice for beam antennas and rotator loops.

SUNLIGHT
Sunny Outdoor Installations

White jacket helps reduce solar heating when the feed line is exposed to strong direct sunlight.

UPGRADE
Replacing RG213 or RG-8X

An excellent upgrade where reducing feed-line loss is a priority without sacrificing flexibility.

Selecting Cable Length

M&P Cable Length Guidance

M&P provides the following transmitting guidance for ULTRAFLEX 10/C Sahara. These figures indicate cable lengths at which M&P rates the performance as Excellent or Good and are not absolute operating limits.

Frequency Excellent Good
14MHz Up to 100m Up to 160m
28MHz Up to 75m Up to 120m
50MHz Up to 60m Up to 80m
144MHz Up to 35m Up to 60m
430MHz Up to 20m Up to 30m
1296MHz Up to 12m Up to 17m
2400MHz Up to 8m Up to 10m
Cable Design

Cable Construction

  • 7 x 1.0mm stranded copper inner conductor
  • 2.9mm overall inner conductor diameter
  • Triple-layer high-pressure physically foamed polyethylene dielectric
  • 100% copper foil first screen with applied PE layer
  • 71% coverage reactive copper braid
  • 144 copper braid wires manufactured using 24 spools
  • UV-resistant white PVC outer jacket
  • 10.3mm overall cable diameter
  • 87% velocity factor
  • Screening efficiency greater than 105dB from 100 to 2000MHz
  • Maximum peak power 12,000W
Installation Note
Not Intended for Direct Burial

ULTRAFLEX 10/C Sahara uses a flexible white PVC outer jacket and is not intended for direct burial.

Manufacturer Documentation

ULTRAFLEX 10/C Sahara Datasheet

View ULTRAFLEX 10/C Sahara Datasheet
Product Information

ULTRAFLEX 10/C Sahara Technical Specifications

Specifications

General

Official Model ULTRAFLEX 10/C Sahara
Nominal Impedance 50 ohms ±3 at 200MHz
Overall Diameter 10.3mm ±0.15mm
Velocity Factor 87%
Capacitance 78pF/m ±2
Screening Efficiency Greater than 105dB, 100 to 2000MHz
Operating Temperature -40°C to +60°C
Net Weight 13kg per 100m
Maximum Peak Power 12,000W
Spark Test 8kV
Direct Burial No
Cable Design

Construction

Inner Conductor 7 x 1.0mm copper wires
Inner Conductor Diameter 2.9mm ±0.15mm
Dielectric Triple-layer physically foamed polyethylene
Dielectric Diameter 7.3mm ±0.05mm
First Screen 100% copper foil with applied PE layer
Reactive Braid 71% coverage, 144 copper wires, 24-spool construction
Outer Jacket UV-resistant white PVC
Inner Conductor Resistance 3.2 ohms/km
Outer Conductor Resistance 9.2 ohms/km
Flexibility

Minimum Bend Radius

Repeated Bending

80mm for up to 15 bends

Single Bend / Choke

40mm

Return Loss

Structural Return Loss

0.3 to 600MHz Greater than 30dB
600 to 1200MHz Greater than 25dB
1200 to 2000MHz Greater than 20dB
RF Loss

Attenuation at 20°C

Frequency Loss dB/100m
1.8MHz0.7dB
3.5MHz0.9dB
7MHz1.0dB
10MHz1.2dB
14MHz1.4dB
21MHz1.7dB
28MHz1.9dB
50MHz2.6dB
100MHz3.8dB
144MHz4.6dB
200MHz5.5dB
400MHz8.2dB
430MHz8.5dB
800MHz11.8dB
1000MHz13.3dB
1296MHz15.3dB
2400MHz21.7dB
3000MHz24.5dB
4000MHz29.0dB
5000MHz33.0dB
5800MHz34.9dB
6000MHz36.8dB
7000MHz40.6dB
8000MHz44.1dB
9000MHz48.1dB
10000MHz52.0dB
11000MHz55.8dB
12000MHz59.9dB
RF Power

Continuous Power Handling at 40°C

Frequency Maximum Continuous Power
1.8MHz6427W
3.5MHz5142W
7MHz4285W
10MHz3955W
14MHz3428W
21MHz2856W
28MHz2437W
50MHz1849W
100MHz1275W
144MHz1049W
200MHz883W
400MHz610W
430MHz587W
800MHz419W
1000MHz372W
1296MHz321W
2400MHz223W
3000MHz193W
4000MHz158W
5000MHz135W
6000MHz117W
7000MHz104W
8000MHz93W

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.