Messi & Paoloni ULTRAFLEX 7 Sahara White Coax
SKU Part Number: RG-MP-ULT7-SAHARA
White 7.3mm Coax That Outperforms RG213/U and RG8 Messi & Paoloni...
Read More
£2.20
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
White 7.3mm Coax That Outperforms RG213/U and RG8

Messi & Paoloni ULTRAFLEX 7 Sahara

All the low-loss performance and exceptional flexibility of ULTRAFLEX 7 with a UV-resistant white jacket designed to reduce solar heating in hot and exposed installations.

Try our Custom Coax Builder

Choose your cable length and connector combination and let us build the lead for you.

Ordering 100 metres or more? Save 10% on the cable.
7mm Size. 10mm-Class Performance.

Smaller than RG213. Lower loss than RG213. Far lower loss than RG-8X.

ULTRAFLEX 7 Sahara delivers the same outstanding RF performance as standard ULTRAFLEX 7, but with a white outer jacket developed for installations exposed to strong sunlight.

Messi & Paoloni ULTRAFLEX 7 Sahara is the white-jacket version of M&P's hugely popular ULTRAFLEX 7 low-loss coaxial cable.

Despite measuring only 7.3mm in diameter, M&P states that ULTRAFLEX 7 outclasses conventional RG213/U and RG8. It provides the practicality, flexibility and manageable size of a smaller cable with RF performance normally associated with much larger 10mm-class coax.

Compared with RG-8 Mini / RG-8X, the difference is even greater. ULTRAFLEX 7 Sahara has considerably lower attenuation, particularly as frequency and cable length increase, making it a major upgrade for longer HF runs and especially for VHF and UHF installations.

PERFORMANCE
Outperforms RG213/U

M&P explicitly rates ULTRAFLEX 7 above conventional RG213/U and RG8 despite its much smaller 7.3mm diameter.

UPGRADE
Major Upgrade from RG-8X

Considerably lower attenuation than typical RG-8X, especially on longer VHF and UHF feed lines.

SAHARA
White Sahara Jacket

White PVC helps reduce solar heating compared with black cable when installed in strong direct sunlight.

FLEXIBILITY
Exceptional Flexibility

19-strand copper centre conductor and reactive braid make it ideal for tight bends and rotator antennas.

Sahara White Jacket

Why a White Coaxial Cable?

The white Sahara jacket is more than an appearance change. M&P developed the Sahara range specifically for installations where coax is exposed to strong sunlight and high temperatures.

Coaxial cable attenuation increases as cable temperature rises. A black cable sitting in direct sunlight can become considerably hotter than the surrounding air, even while the operator and equipment remain in the shade.

By using a white UV-resistant PVC jacket, ULTRAFLEX 7 Sahara reflects more solar energy and can remain cooler than an equivalent black cable. This helps limit the temperature-related increase in attenuation and preserve more of the cable's RF performance in hot, sunny installations.

Useful in the UK Too

The white jacket is also an attractive option where the feed line runs along white walls, fascia boards, conservatories or other light-coloured surfaces and a black cable would be visually intrusive.

Cable Comparison

See the Difference Against RG213 and RG-8X

ULTRAFLEX 7 Sahara uses the same low-loss RF construction as standard ULTRAFLEX 7. Lower dB figures mean less signal is lost between your radio and antenna.

Frequency ULTRAFLEX 7 Sahara Typical RG213/U Typical RG-8X
50MHz 4.0dB / 100m Approx. 4.3dB / 100m Approx. 6.6dB / 100m
100MHz 5.8dB / 100m Approx. 6.2dB / 100m Approx. 9.8dB / 100m
400MHz 11.8dB / 100m Approx. 13.5dB / 100m Approx. 19.7dB / 100m

RG213/U and RG-8X figures are representative values and can vary between manufacturers and individual cable constructions.

The Practical Difference

If you are considering RG213 because you want low loss, ULTRAFLEX 7 Sahara gives you even better RF performance without having to install a bulky 10mm cable.

If you are considering RG-8X because you want something compact and flexible, ULTRAFLEX 7 Sahara gives you similarly convenient handling with dramatically better RF performance.

Flexible Construction

Designed for Tight Bends and Rotator Antennas

ULTRAFLEX 7 Sahara uses a 19-wire stranded copper centre conductor, giving it excellent flexibility compared with cables using a solid or less finely stranded conductor.

The cable is designed for tight routing and rotator-operated antennas, with a minimum recommended bend radius of approximately 68mm for repeated bending and only 34mm for a single bend or choke.

M&P Construction

M&P Reactive Copper Braid

Screening is provided by a 144-wire copper reactive braid with approximately 83% coverage, manufactured using a 24-spool braiding process rather than a conventional 16-spool machine.

The additional crossover points allow the braid to react to twisting and bending in a spring-like manner while maintaining excellent screening.

Beneath the braid is a 100% copper foil first screen with an applied polyethylene layer designed to prevent cracking during short-radius bends.

RF Isolation

A++ Screening

The combination of full copper foil and reactive copper braid gives ULTRAFLEX 7 Sahara a specified screening efficiency greater than 105dB between 100MHz and 2000MHz, qualifying for M&P's A++ screening classification.

Proven Design
Proven ULTRAFLEX 7 Performance

The ULTRAFLEX 7 design was selected as the official coaxial cable for the World Radiosport Team Championship in both 2018 and 2022, where reliable RF performance, flexibility and practical field deployment are all important.

Applications

Where ULTRAFLEX 7 Sahara Works Best

SUNLIGHT
Sunny Outdoor Installations

White jacket helps minimise solar heating where a feed line is exposed to strong direct sunlight.

RG213
Replacing RG213

Ideal when you want RG213-class or better performance without its larger diameter, additional weight and reduced flexibility.

RG-8X
Upgrading RG-8X

A substantial performance upgrade for RG-8X installations, particularly on VHF, UHF and longer cable runs.

MOVEMENT
Rotator Antennas

Exceptional flexibility makes the cable particularly suitable for beams and rotator loops.

Selecting Cable Length

M&P Cable Length Guidance

M&P provides the following transmitting guidance for ULTRAFLEX 7 Sahara. These are recommendations for choosing an appropriate cable size rather than absolute cable limits.

Frequency Excellent Good M&P Guidance
14MHz Up to 60m Up to 100m Choose larger coax above 100m
28MHz Up to 50m Up to 75m Choose larger coax above 75m
50MHz Up to 35m Up to 50m Choose larger coax above 50m
144MHz Up to 15m Up to 25m Choose 10.3mm coax for longer runs
430MHz Up to 10m Up to 15m Choose larger coax above 15m
1296MHz - Up to 5m Choose larger coax above 5m
2400MHz - Up to 3m Choose larger coax above 3m
Cable Design

Cable Construction

  • 19 x 0.38mm stranded copper inner conductor
  • 1.9mm overall inner conductor diameter
  • Triple-layer physically foamed polyethylene dielectric
  • 100% copper foil first screen with applied PE layer
  • 83% coverage reactive copper braid
  • 144 copper braid wires manufactured using 24 spools
  • UV-resistant white PVC outer jacket
  • 7.3mm overall cable diameter
  • 83% velocity factor
  • A++ screening efficiency greater than 105dB from 100 to 2000MHz
Installation Note
Not Suitable for Direct Burial

ULTRAFLEX 7 Sahara uses a flexible white PVC outer jacket and is not suitable for direct burial. For underground installations, use an M&P cable specifically designed for direct burial.

Manufacturer Documentation

ULTRAFLEX 7 Sahara Datasheet

View ULTRAFLEX 7 Sahara Datasheet
Product Information

ULTRAFLEX 7 Sahara Technical Specifications

Specifications

General

Official Model ULTRAFLEX 7 Sahara
Nominal Impedance 50 ohms ±3 at 200MHz
Overall Diameter 7.3mm ±0.15mm
Velocity Factor 83%
Capacitance 75pF/m ±2
Screening Efficiency Greater than 105dB, 100 to 2000MHz
Screening Class A++
Temperature Range -40°C to +60°C
Net Weight 6.9kg per 100m
Maximum Peak Power 8000W
Spark Test 4kV
Direct Burial No
Cable Design

Construction

Inner Conductor 19 x 0.38mm copper wires
Inner Conductor Diameter 1.9mm ±0.15mm
Dielectric Triple-layer physically foamed polyethylene
Dielectric Diameter 5mm ±0.05mm
First Screen 100% copper foil with applied PE layer
Reactive Braid 83% coverage, 144 copper wires, 24-spool construction
Outer Jacket UV-resistant white PVC
Inner Conductor Resistance 7.3 ohms/km
Outer Conductor Resistance 9.8 ohms/km
Flexibility

Minimum Bend Radius

Repeated Bending

68mm for up to 15 bends

Single Bend / Choke

34mm

Return Loss

Structural Return Loss

0.3 to 600MHz Greater than 28dB
600 to 1200MHz Greater than 22dB
1200 to 2000MHz Greater than 18dB
RF Loss

Attenuation at 20°C

Frequency Loss dB/100m
1.8MHz1.1dB
3.5MHz1.3dB
7MHz1.7dB
10MHz1.9dB
14MHz2.2dB
21MHz2.6dB
28MHz3.0dB
50MHz4.0dB
100MHz5.8dB
144MHz6.9dB
200MHz8.2dB
400MHz11.8dB
430MHz12.3dB
800MHz17.1dB
1000MHz19.3dB
1296MHz22.3dB
2400MHz32.3dB
3000MHz36.2dB
4000MHz42.6dB
5000MHz49.3dB
6000MHz55.3dB
7000MHz61.6dB
8000MHz68.4dB
RF Power

Continuous Power Handling at 40°C

Frequency Maximum Continuous Power
1.8MHz4572W
3.5MHz3393W
7MHz2714W
10MHz2286W
14MHz1974W
21MHz1670W
28MHz1448W
50MHz1086W
100MHz749W
144MHz629W
200MHz530W
400MHz368W
430MHz353W
800MHz254W
1000MHz225W
1296MHz195W
2400MHz134W
3000MHz120W
4000MHz102W
5000MHz88W
6000MHz79W
7000MHz71W
8000MHz63W

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]