Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599Messi & Paoloni ULTRAFLEX 10C Competition /.400"
M&P's premium flexible 10.3mm coax, combining outstanding low-loss performance with exceptional flexibility, full-copper construction and excellent RF screening.
Choose your cable length and connector combination and let us build the lead for you.
Far lower loss than RG213. Dramatically lower loss than RG-8X.
ULTRAFLEX 10C Competition is designed for operators who want premium low-loss performance across HF, VHF and UHF without sacrificing the flexibility of a stranded centre conductor.
Messi & Paoloni ULTRAFLEX 10C Competition /.400" is a premium 10.3mm 50 ohm coaxial cable designed for demanding amateur radio, contest and communications installations where feed-line performance really matters.
M&P describes ULTRAFLEX 10C Competition as an evolution of its ULTRAFLEX 10 design and specifically highlights its far better performance than conventional RG213. It combines very low attenuation with an 87% velocity factor, full-copper construction and screening efficiency greater than 105dB.
Compared with RG-8 Mini / RG-8X, the difference is even more substantial. RG-8X is convenient and compact, but its attenuation rises quickly as frequency and cable length increase. ULTRAFLEX 10C Competition retains far more of the signal travelling between your radio and antenna.
M&P specifically highlights ULTRAFLEX 10C Competition as offering substantially better RF performance than conventional RG213.
Dramatically lower attenuation than typical RG-8X, especially on VHF, UHF and longer cable runs.
High-pressure triple-layer physically foamed polyethylene dielectric provides excellent RF efficiency.
Stranded copper centre conductor and reactive braid make it practical for tight routing and rotator antennas.
M&P's Performance-Focused Flexible 10.3mm Coax
ULTRAFLEX 10C Competition is aimed at installations where attenuation matters just as much as flexibility.
At 20°C, M&P specifies attenuation of only 1.4dB per 100m at 14MHz, 2.6dB at 50MHz, 4.6dB at 144MHz, 8.5dB at 430MHz and 15.3dB at 1296MHz.
Those figures make it particularly attractive for long feed lines and higher-frequency operation, where every additional dB of cable loss has a greater effect on both transmitted and received signals.
See the Difference Against RG213 and RG-8X
ULTRAFLEX 10C Competition is almost the same overall diameter as conventional RG213, but the modern dielectric and screening construction deliver substantially lower attenuation.
RG213/U and RG-8X figures are representative values and may vary between manufacturers and individual cable constructions.
If you are considering RG213, ULTRAFLEX 10C Competition gives you substantially lower loss from almost the same overall cable diameter.
If you are upgrading from RG-8X, the difference is considerably greater, making ULTRAFLEX 10C especially worthwhile on longer runs and at VHF or UHF.
High Performance Without Sacrificing Flexibility
Low-loss 10mm-class coax does not have to mean an awkward, rigid feed line.
ULTRAFLEX 10C Competition uses a 7 x 1.0mm stranded copper centre conductor with an overall diameter of approximately 2.9mm. M&P specifically highlights its exceptional flexibility for tight bends and antennas using rotators.
The recommended minimum bend radius is 80mm for repeated bending and only 40mm for a single bend or choke.
This makes it a strong choice for beam antennas, rotator loops and installations where a conventional low-loss cable might otherwise be difficult to route.
Reactive Copper Braid
The outer conductor uses a 144-wire copper reactive braid with approximately 71% coverage.
M&P manufactures this braid using a 24-spool machine rather than a conventional 16-spool process. The additional crossover points help the braid react to bending and twisting in a spring-like manner while maintaining excellent RF screening.
Beneath the braid is a 100% copper foil first screen with an applied polyethylene layer which helps prevent cracking during short-radius bends.
Greater Than 105dB Screening
M&P specifies screening efficiency greater than 105dB between 100MHz and 2000MHz.
The complete screening system is made from copper and is designed to provide excellent isolation from unwanted electromagnetic interference while also reducing unwanted RF radiation from the feed line.
The low-loss construction also provides substantial power-handling capability. At an ambient cable temperature of 40°C, M&P specifies continuous handling of approximately 3428W at 14MHz, 1849W at 50MHz, 1049W at 144MHz and 587W at 430MHz.
Maximum peak power is specified at 12,000W. Continuous ratings vary with operating frequency and temperature and should be used when planning demanding high-power installations.
Where ULTRAFLEX 10C Competition Works Best
An excellent all-round feed line where minimising RF loss is more important than simply choosing the cheapest cable.
Very low attenuation helps preserve both transmitted power and received signal over substantial cable runs.
Particularly attractive as operating frequency increases and the shortcomings of conventional coax become more significant.
Stranded construction and reactive braid provide the flexibility needed for beam antennas and rotator loops.
Low loss, excellent screening and substantial power handling suit demanding high-duty operating environments.
A straightforward performance upgrade where reducing feed-line attenuation is a priority.
M&P Cable Length Guidance
M&P provides the following transmitting guidance for this cable. These figures indicate lengths at which M&P rates performance as Excellent or Good and are not absolute operating limits.
Cable Construction
- 7 x 1.0mm stranded copper inner conductor
- 2.9mm overall inner conductor diameter
- Triple-layer high-pressure physically foamed polyethylene dielectric
- 100% copper foil first screen with applied PE layer
- 71% coverage reactive copper braid
- 144 copper braid wires manufactured using 24 spools
- UV-resistant black PVC outer jacket
- 10.3mm overall cable diameter
- 87% velocity factor
- Screening efficiency greater than 105dB from 100 to 2000MHz
- Maximum peak power 12,000W
ULTRAFLEX 10C Competition uses a flexible PVC outer jacket and is not intended for direct burial.
ULTRAFLEX 10C Competition Datasheet
View ULTRAFLEX 10C Competition DatasheetULTRAFLEX 10C Competition /.400" Technical Specifications
General
Construction
Minimum Bend Radius
80mm for up to 15 bends
40mm
Structural Return Loss
Attenuation at 20°C
Continuous Power Handling at 40°C
Delivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.















