RX antenna switch for second antenna setup
SKU Part Number: Box5-SDR3-RX-0NLY-0-70
Receive Only Antenna TX/RX Switch For Loop on the Ground and Beverage Antenna etc On HF we often have a lot of noise when RXing on our best TX...
Read More
£177.95
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Receive Only Antenna TX/RX Switch

For Loop on the Ground and Beverage Antenna etc

On HF we often have a lot of noise when RXing on our best TX antenna. In order to improve their HF RX many stations choose to use one antenna to TX and another to RX. These are often a Loop on the Ground or a Beverage antenna system. The problem being that many radios only have a single SO239 connector. Obviously, you do not want to have to keep unplugging and changing antennas between TX and RX periods. This is where a Receive Only Antenna switch is needed.

This low insertion loss 100w switch changes between TX and RX antennas for you, ensuring that you do not damage your Radio by transmitting into the wrong antenna. 

The switching is controlled by the PTT or SEND from your radio to the PTT RCA on the back of your Receiver Only Antenna Switch. Once set up, you do not have to even think about it.

Often you will only want to use your Loop on the Ground or Beverage etc. on the Low Bands whilst still using your normal TX/RX antenna on the Higher Bands. No Problem. Just remove the PTT RCA that comes from your Radio from the back of your SDRSwitch and replace it with a shorted-out RCA Male connector.  This will put your Receive Only Antenna switch into the TX RF path.  Your TX antenna will become both your TX and RX antenna. As the evening rolls around and you want to go back to the Low Bands, then unplug your shorted-out RCA Male connector and plug your PTT from your radio back in.  It is that simple. 

Have an SDR you want to protect?

Another very good use for a Receive Only Antenna Switch is to protect a stand-alone SDR or secondary Receiver. Often, we may have 2 radios listening on HF at the same time. When you TX on your main radio, you do not want to cause damage to your secondary receiver.

 

By connecting a PTT cable from your radio to the back of your stand-alone Receive Only Antenna, you switch your antenna to your secondary receiver, which will be disconnected when you TX on your main transceiver.

Obviously some consideration will still have to be given to the location of the two different antennas. 

PDF Instructions

 

 

 

 

 

 

 

The Ideal Alternative to the Discontinued MFJ-1708

If you’ve been on the hunt for a solid replacement to the now-discontinued MFJ-1708, look no further. This RX antenna switch is the perfect alternative, offering the same functionality — and in many ways, improved performance — for those looking to use separate antennas for transmitting and receiving.

This SDR (Software Defined Radio) switch enables you to transmit (TX) using your main transmitting antenna while simultaneously receiving (RX) through a dedicated RX-only antenna. Ideal for reducing noise and improving receive performance, particularly in weak signal environments, this switch provides the flexibility serious radio operators demand.

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.