main product photo
Yaesu FT-710 AESS HF/70MHZ/50MHz SDR Transceiver - £85 Cashback plus FREE Yaesu Hat
SKU Part Number: FT-710 AESS
Cashback Available on this item!  £985.00 - £85 cashback = £900.00    Purchase this unit at full price and you will receive...
Read More
Finance from £26.18 a month
£985.00 £820.83
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Product Accessories

Cashback Available on this item!

 £985.00 - £85 cashback = £900.00 

 

Purchase this unit at full price and you will receive CASHBACK from Yaesu!

After delivery, visit the following website: yaesucashback.co.uk. Yaesu will process the cashback and send the cashback amount back to your bank account. It's as easy as that!
 
Plus receive a FREE limited edition Yaesu hat!
 

Click below to view destination sheet to enable 4m:

Page 1

Sherwood Engineering Incorporated
4th Highest Performing Receiver    Receiver Test Data (sherweng.com)   [Updated 01 October 2022. Added Yaesu FT-710

 

Radio Features:

- HF/50MHz band 100W Compact SDR Transceiver

- SDR circuit configuration emphasizes Receiving Performance which is enabled by the same high-resolution A/D converter and FPGA used in YAESU high-end SDR transceivers.

- Powerful RF Front-End and Low Noise Oscillator System enable Phenomenal Multi-Signal Receiving Characteristics*

·RMDR:113dB+     ·BDR:127dB+

·3rd IMDR:102dB+   ·TX Phase Noise: -143dBc/Hz

*Multi-Signal Receiving Characteristic: 14MHz band/2kHz separation  *TX Phase Noise: 100W, CW mode

- Band-Pass-Filters dedicated for the amateur bands to eliminate out-of-band unwanted signals

- Built-in High-speed Automatic antenna tuner with 100 channel memory

- Effective QRM rejection afforded by Dual-core 32-bit high speed floating decimal point DSP

- AESS (Acoustic Enhanced Speaker System) with the supplied SP-40 speaker to create High-fidelity audio output

- High Resolution 4.3-inch TFT Color Touch Panel Display

- 3DSS, real-time 3-Dimensional Spectrum Stream presentation

- VMI (VFO Mode Indictor) shows the current operating mode (VFO-A, VFO-B, Memory Mode and Clarifier/Split operation) at a glance

- “PRESET” Mode functions most suitable for FT8 operation

- Equipped with the External Display terminal (DVI-D)

- Two (2) USB Ports (Type-A and Type-B)

- SD Memory Card Slot

- Support the FC-40 Auto Antenna Tuner

- Remote Operation with Network Remote Control System (Available in the near future)

 

Supplied Accessories:

External Speaker SP-40

Microphone SSM-75E

DC Power Cable w/Fuse Spare Fuse

Operating Manual

 

Specifications:

Frequency Ranges:  RX 30kHz - 75MHz (Operating)

1.8MHz - 29.699999MHz (Specified performance, Amateur bands only)

50MHz - 53.999999MHz  (Specified performance, Amateur bands only)

70MHz - 70.499999MHz  (Specified performance, UK Amateur bands only)

TX 1.8MHz band - 50MHz band  (Amateur bands only)

Modulation Type: A1A(CW), A3E(AM), J3E(LSB,USB), F3E(FM)

Frequency Stability: ±0.5ppm (after 1 minute @ +32°F to +122°F / 0°C to +50°C) 

Supply Voltage: DC 13.8V ±15%

RF Power Output: 5W - 100W  (5W - 25W : AM Carrier)

Dimensions (W x H x D): 9.4" x 3.1" 9.7" (239 x 80 x 247mm)

Weight (Approx.): 9.92 lbs (4.5kg)

Cashback Available on this item!

 £985.00 - £85 cashback = £900.00 

 

Purchase this unit at full price and you will receive CASHBACK from Yaesu!

After delivery, visit the following website: yaesucashback.co.uk. Yaesu will process the cashback and send the cashback amount back to your bank account. It's as easy as that!
 
Plus receive a FREE limited edition Yaesu hat!
 

Receive a FREE limited edition Yaesu hat!

 

Click below to view destination sheet to enable 4m:

Page 1

Sherwood Engineering Incorporated
4th Highest Performing Receiver    Receiver Test Data (sherweng.com)   [Updated 01 October 2022. Added Yaesu FT-710

Radio Features:

- HF/50MHz band 100W Compact SDR Transceiver

- SDR circuit configuration emphasizes Receiving Performance which is enabled by the same high-resolution A/D converter and FPGA used in YAESU high-end SDR transceivers.

- Powerful RF Front-End and Low Noise Oscillator System enable Phenomenal Multi-Signal Receiving Characteristics*

·RMDR:113dB+     ·BDR:127dB+

·3rd IMDR:102dB+   ·TX Phase Noise: -143dBc/Hz

*Multi-Signal Receiving Characteristic: 14MHz band/2kHz separation  *TX Phase Noise: 100W, CW mode

- Band-Pass-Filters dedicated for the amateur bands to eliminate out-of-band unwanted signals

- Built-in High-speed Automatic antenna tuner with 100 channel memory

- Effective QRM rejection afforded by Dual-core 32-bit high speed floating decimal point DSP

- AESS (Acoustic Enhanced Speaker System) with the supplied SP-40 speaker to create High-fidelity audio output

- High Resolution 4.3-inch TFT Color Touch Panel Display

- 3DSS, real-time 3-Dimensional Spectrum Stream presentation

- VMI (VFO Mode Indictor) shows the current operating mode (VFO-A, VFO-B, Memory Mode and Clarifier/Split operation) at a glance

- “PRESET” Mode functions most suitable for FT8 operation

- Equipped with the External Display terminal (DVI-D)

- Two (2) USB Ports (Type-A and Type-B)

- SD Memory Card Slot

- Support the FC-40 Auto Antenna Tuner

- Remote Operation with Network Remote Control System (Available in the near future)

 

Supplied Accessories:

External Speaker SP-40

Microphone SSM-75E

DC Power Cable w/Fuse Spare Fuse

Operating Manual

 

Specifications:

Frequency Ranges:  RX 30kHz - 75MHz (Operating)

1.8MHz - 29.699999MHz (Specified performance, Amateur bands only)

50MHz - 53.999999MHz  (Specified performance, Amateur bands only)

70MHz - 70.499999MHz  (Specified performance, UK Amateur bands only)

TX 1.8MHz band - 50MHz band  (Amateur bands only)

Modulation Type: A1A(CW), A3E(AM), J3E(LSB,USB), F3E(FM)

Frequency Stability: ±0.5ppm (after 1 minute @ +32°F to +122°F / 0°C to +50°C) 

Supply Voltage: DC 13.8V ±15%

RF Power Output: 5W - 100W  (5W - 25W : AM Carrier)

Dimensions (W x H x D): 9.4" x 3.1" 9.7" (239 x 80 x 247mm)

Weight (Approx.): 9.92 lbs (4.5kg)

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]