Alinco DX-70 (Used)
SKU Part Number: U21289
Alinco DX-70 in good condition with DC cable and hand mic. No box. One of the clips to hold head is stuck open but head is still securely...
Read More
£399.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Alinco DX-70 in good condition with DC cable and hand mic. No box. One of the clips to hold head is stuck open but head is still securely attached.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 50-54 MHz
RX: 0.15-30 / 50-54 MHz
Tuning steps: 25 / 100 / 500 Hz, 1 / 2.5 / 5 / 9 / 10 / 12.5 KHz
Frequency stability: ±10 ppm @ -10 to +50° (14 to 122°F)
Mode: AM / FM / SSB / CW
Channels / memory management: 100 regular
Non-volatile EEPROM storage
Repeater shift / offset: Programmable
Power supply: 13.8 VDC ±15%
Current drain / power consumption: RX: Max 1 A
TX: Max 25 A
Antenna impedance / connector: 50 ohm / Two SO-239
Dimensions (W*H*D): 178*58*230 mm (7.01*2.28*9.06")
Weight: 2.7 Kg (5.95 lb)
Other features: CTCSS/PL encoder. NB. Attenuator. Detachable front panel. Full QSK.
   
   
RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 71.75 MHz
2nd IF: 455 KHz
Sensitivity: AM (10 dB S/N)
0.5-1.8 MHz: 10 uV
1.8-30 MHz: 2 uV
50-54 MHz: 2 uV
FM (12 dB SINAD)
28-30 MHz: 0.5 uV
50-54 MHz: 0.3 uV
SSB/CW (10 dB S/N)
0.5-1.8 MHz: 1 uV
1.8-30 MHz: 0.25 uV
50-54 MHz: 0.15 uV
Selectivity: SSB/AM narrow:
2.4 KHz (-6 dB)
4.5 KHz (-60 dB)
SSB narrow/CW standard:
1 KHz (-6 dB)
3 KHz (-60 dB)
CW narrow:
500 Hz (-6 dB)
3 KHz (-60 dB)
AM standard/FM:
9 KHz (-6 dB)
20 KHz (-50 dB)
Image rejection: Better than 70 dB
AF output power / speaker: 2 W at 10% distortion / 8 ohm
External speaker connector: 3.5 mm
   
   
TRANSMITTER SECTION
RF output power:
  High Low
AM: 40 W 4 W
FM: 100 W 10 W
SSB (PEP): 100 W 10 W
CW: 100 W 10 W
Modulation system: AM: Low power modulation
FM: Reactance modulation
SSB: Balanced modulation
Max FM deviation (Factory set): HF: ±2.5 KHz
6 m: ±5 KHz
Spurious emissions: Better than -50 dB
Microphone impedance / connector: 2 Kohm / 8-pin (Metal locking ring connector)

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]