Xiegu G90 (USED)
SKU Part Number: U21826
The product is in good condition, including DC cable, manual, microphone and box. SPECIFICATIONS GENERAL Type: Amateur HF...
Read More
£299.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition, including DC cable, manual, microphone and box.

SPECIFICATIONS

GENERAL
Type: Amateur HF transceiver
Frequency range: TX: 10-160 m
RX: 0.5-30 MHz
Tuning steps: Minimum 10 Hz
Frequency stability: ±1 ppm (After 60 minutes warmup)
Mode: AM / SSB / CW (FM with optional GSOC controller)
Channels / memory management: 63 regular
Repeater shift / offset: No dedicated. Use VFO A/B split instead.
Requires optional GSOC for FM/repeater use
Power supply: 9-15 VDC (2-pin connector)
Current drain / power consumption: RX: Max 650 mA (500 mA according to manual)
TX: Max 8 A
Antenna impedance / connector: 50 ohm / SO-239
Dimensions (W*H*D): 120*45*210 mm (4.72*1.77*8.27"), without handles
Weight: 1.63 Kg (3.59 lb), without handles
Other features: 24-bit SDR. 1.8" color TFT. Spectrum and waterfall display. Keyer.
CI-V CAT control. I/Q output. Detachable display head. CW decoder.
VOX. SWR plotter. Wide range ATU. Multi-function microphone.
   
   
RECEIVER SECTION
Receiver system: Down mix 24-bit SDR. Cirrus Logic CS4272 @ 48 KHz
Sensitivity: AM (10 dB S/N)
0.5-2 MHz: 10 uV
2-30 MHz: 2 uV
FM (12 dB SINAD), with optional GSOC controller
1.8-2 MHz: 0.35 uV
2-30 MHz: 0.25 uV
SSB/CW (10 dB S/N)
1.8-2 MHz: 0.35 uV
2-30 MHz: 0.25 uV
Selectivity: 50-5500 Hz adjustable
Image rejection: 70 dB
AF output power / speaker: 500 mW at 10% distortion / 8 ohm
External speaker connector: 3.5 mm, 4-16 ohm
   
   
TRANSMITTER SECTION
RF output power:
  Pwr
AM: 5 W (Carrier)
FM: 20 W (With GSOC option)
SSB (PEP): 20 W
CW: 20 W
Modulation system: Digitally generated
Max FM deviation (Factory set): ±? KHz (With GSOC option)
Spurious emissions: Better than -50 dB
Microphone impedance / connector: 200-10000 ohm (600 ohm nominal) / 8-pin (Modular)
Microphone input level: ? mV

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]