Flex 6400 (USED)
SKU Part Number: U21840
The product is in good condition, including DC cable, microphone and box. SPECIFICATIONS GENERAL Type: Amateur HF/VHF SDR...
Read More
£1,749.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition, including DC cable, microphone and box.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF SDR transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.03-54 MHz
Tuning steps: Down to 1 Hz
Frequency stability: ±? ppm
Mode: AM / Sync-AM / FM / SSB / CW / RTTY (DV option)
Channels / memory management: Depending on software
Repeater shift / offset: Depending on software
Power supply: 13.8 VDC ±15% (Anderson Powerpole connectors)
Current drain / power consumption: RX: Max 1.7 A
TX: Max 23 A
Antenna impedance / connector: 50 ohm / Two SO-239. One BNC (RX only). One BNC (Transverter)
Dimensions (W*H*D): 350*171*337 mm (14*6.74*13.25")
Weight: ? Kg (? lb)
Other features: Two USB2 ports. Two independent receivers. Two 7 MHz panafall displays.
LAN port. Full duplex operation. Full QSK. Integrated remote operation.
   
   
RECEIVER SECTION
Receiver system: Direct digital sampling
ADC sampling rate: 122.88 Msps
ADC resolution: 16 bit
Sensitivity:  
Selectivity:  
Image rejection:  
AF output power / speaker: No built-in amplifier or speaker
External speaker connector: No
   
   
TRANSMITTER SECTION
RF output power: 1-100 W (AM: 1-25 W)
Modulation system: Digital low power at carrier frequency
Max FM deviation (Factory set): FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions: Better than -? dB
Microphone impedance / connector: 600 ohm (Nominal) / ?-pin (3.5 mm)
Microphone input level: ? mV

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]