Yaesu FTX-1 Field (USED)
SKU Part Number: U21901
The product is in good condition, including the microphone, DC cable, manual and box. SPECIFICATIONS GENERAL Type: Amateur HF/VHF/UHF...
Read More
Special Price £949.95 Regular Price £1,449.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition, including the microphone, DC cable, manual and box.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF/UHF transceiver
Frequency range: TX: 10-160 m + WARC / 6 m / 2 m / 70 cm (Also 4 m for UK version)
RX: 0.03-174 / 400-470 MHz
Tuning steps: 1 / 5 / 10 / 20 Hz
Frequency stability: ±0.5 ppm @ -10 to +50°C (14 to 122°F) after 1 minute warmup
Mode: AM / FM / NFM / SSB / CW / DV (C4FM "Fusion")
Channels / memory management: 999 regular with alpha tags (12 characters)
10 QMB
5 PMG
MAG (Memory Auto Grouping)
Repeater shift / offset: Programmable
Power supply: 10.8 VDC (Battery pack) or 13.8 VDC ±15% external
Current drain / power consumption: RX: 600-900 mA
TX: Max 3 A @ 10 W output power
Max 21 A @ 100 W output power (With SPA-1 option)
Antenna impedance / connector: 50 ohm / Two BNC
Dimensions (W*H*D): 213*89*55 mm (8.4*3.5*2.2")
213*89*240 mm (8.4*3.5*9.4"), with SPA-1 option
Weight: 1.25 Kg (2.75 lb)
3.9 Kg (8.6 lb), with SPA-1 option
Other features: 4.3" color touch TFT with switchable display modes. 3DSS bandscope. Two independent receivers.
Two speakers. 32-bit IF DSP. Wires-X. USB ports for audio I/O and CAT operation. S-DX. AMS. APRS.
Micro SD card slot. Optional ATU that attaches to the back. Optional cooling fan for prolonged
transmissions like FT8 and similar. Optional 100 W dockable PA. Optional Bluetooth.
   
   
RECEIVER SECTION
Receiver system: Direct sampling superheterrodyne (Below 48 MHz)
Single conversion IF sampling (Above 48 MHz)
IF: 44.5-49.5 MHz (Main RX) - 41.3-44.3 MHz (Sub RX)
Sensitivity: AM (BW: 6 KHz / 10 dB S+N/N)
0.5-1.8 MHz: 7.9 uV
1.8-30 MHz: 2 uV
50-54 MHz: 1 uV
70-70.5 MHz: 2 uV
144-148 MHz: 1 uV
430-450 MHz: 1 uV
FM (BW: 12 KHz / 12 dB SINAD)
28-30 MHz: 0.25 uV
50-54 MHz: 0.2 uV
70-70.5 MHz: 0.25 uV
144-148 MHz: 0.125 uV
430-450 MHz: 0.125 uV
SSB/CW (BW: 2.4 KHz / 10 dB S+N/N)
1.8-30 MHz: 0.16 uV
50-54 MHz: 0.125 uV
70-70.5 MHz: 0.16 uV
144-148 MHz: 0.125 uV
430-450 MHz: 0.125 uV
Squelch sensitivity:  
Noise figure:  
Selectivity: AM (BW=6 KHz - Width: Center)
6 KHz (-6 dB)
15 KHz (-60 dB)
FM (BW=12 KHz - Width: Center)
12 KHz (-6 dB)
25 KHz (-60 dB)
SSB (BW=2.4 KHz - Width: Center)
2.4 KHz (-6 dB)
3.6 KHz (-60 dB)
CW (BW=0.5 KHz - Width: Center)
500 Hz (-6 dB)
750 Hz (-60 dB)
Image rejection: 70 dB or better (HF amateur bands)
60 dB or better (VHF / UHF amateur bands)
AF output power / speaker: 1.5 W at 10% distortion / 4 ohm (Without SPA-1 option)
External speaker connector: TS minijack (3.5 mm), 4-16 ohm
   
   
TRANSMITTER SECTION
RF output power:
  Battery @13.8V
AM: 0.5-1.5 W 0.5-2.5 W
FM: 0.5-6 W 0.5-10 W
SSB (PEP): 0.5-6 W 0.5-10 W
CW: 0.5-6 W 0.5-10 W
C4FM: 0.5-6 W 0.5-10 W
Modulation system: AM: Low-level (Early stage)
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set): FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions: HF: Better than -50 dB
6 m: Better than -63 dB
2 m/70 cm: Better than -60 dB
Microphone impedance / connector: 200-10000 ohm (600 ohm nominal) / 8-pin (Modular)
Microphone input level: ? mV

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]