Icom IC-7200 (USED)
SKU Part Number: U18069
£699.00 £699.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition including manual, DC cable, microphone and box.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.03-60 MHz
Tuning steps: 1 / 10 / 100 Hz, 1 / 5 / 9 / 10 KHz
Frequency stability: ±? ppm
Mode: AM / SSB / CW / RTTY
Channels / memory management: 199 regular
2 scan edges
Non-volatile EEPROM storage
Repeater shift / offset: None
Power supply: 13.8 VDC ±15%
Current drain / power consumption: RX: 1.3 to 2 A
TX: Max 22 A
Antenna impedance / connector: 50 ohm / SO-239
Dimensions (W*H*D): 241*84*281 mm (9.5*3.3*11.1")
Weight: 5.5 Kg (12.1 lb)
Other features: Water resistant. USB-connector. CI-V. 20 dB attenuator.
Voice synthesizer. Twin PBT. VOX. NB. 32-bit IF DSP.
   
   
RECEIVER SECTION
Receiver system: Triple conversion superheterodyne
1st IF: 64.455 MHz
2nd IF: 455 KHz
3rd IF: 15.625 KHz
Sensitivity: AM (preamp on, sharp filter, 10 dB S/N)
0.5-1.8 MHz: 13 uV
1.8-29.7 MHz: 2 uV
50-54 MHz: 1 uV
SSB/CW (preamp on, sharp filter, 10 dB S/N)
1.8-29.7 MHz: 0.16 uV
50-54 MHz: 0.13 uV
Selectivity: AM (6 KHz BW)
6 KHz (-6 dB)
15 KHz (-60 dB)
SSB (2.4 KHz BW)
2.4 KHz (-6 dB)
3.6 KHz (-60 dB)
CW (500 Hz BW)
500 Hz (-6 dB)
900 Hz (-60 dB)
RTTY (350 Hz BW)
360 Hz (-6 dB)
650 Hz (-60 dB)
Image rejection: 70 dB
AF output power / speaker: 2 W at 10% distortion / 8 ohm
External speaker connector: 3.5 mm (Mono), 8 ohm
   
   
TRANSMITTER SECTION
RF output power:
  Pwr
AM: 1-25 W
SSB (PEP): 2-100 W
CW/RTTY: 2-100 W
Modulation system: AM: Digital low power modulation
SSB: Digital PSN modulation
Max FM deviation (Factory set): No FM
Spurious emissions: HF: Better than -50 dB
6 m: Better than -63 dB
Microphone impedance / connector: 600 ohm / 8-pin (Metal locking ring connector)
Microphone input level: ? mV

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]