Icom IC-7100 (USED)
SKU Part Number: U18118
£899.00 £899.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition including manual, microphone, DC cable and box.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF/UHF transceiver
Frequency range: Europe
TX: 10-160 m + WARC / 6 m / 4 m / 2 m / 70 cm
RX: 0.03-200 / 400-470 MHz
USA
TX: 10-160 m + WARC / 6 m / 2 m / 70 cm
RX: 0.03-200 / 400-470 MHz
Tuning steps: Down to 1 Hz
Frequency stability: ±0.5 ppm @ 0-50°C (32-122°F), after 5 minutes warmup
Mode: TX: AM / FM / SSB / CW / RTTY / DV (D-Star)
RX: AM / FM / WFM / SSB / CW / RTTY / DV (D-Star)
Channels / memory management: 495 regular in 5 banks
3 scan edge pairs
4 call
Non-volatile EEPROM storage
Repeater shift / offset: ±0-9.999 MHz in 1 KHz steps
Power supply: 13.8 VDC ±15%
Current drain / power consumption: RX: 0.9 to 1.2 A
TX: Max 22 A
Antenna impedance / connector: 50 ohm / Two SO-239
Dimensions (W*H*D): RF unit: 167*58*225 mm (6.58*2.28*8.86")
Controller: 165*64*78 mm (6.5*2.52*3.07")
Weight: RF unit: 2.3 Kg (5.07 lb)
Controller: 500 g (1.1 lb)
Other features: CTCSS/PL and DTCS with tone scan. 1750 Hz tone call. CI-V. Voice recorder.
Dot-matrix touch-screen controller. IF-DSP. SD memory card slot. Keyer.
USB audio in/out. Remote control. SWR meter.
   
   
RECEIVER SECTION
Receiver system: Double conversion superheterodyne (WFM)
1st IF: 134.732 MHz
2nd IF: 10.7 MHz
Triple conversion superheterodyne (AM/FM/SSB/CW/RTTY)
1st IF: 124.487 MHz
2nd IF: 455 KHz
3rd IF: 36 KHz
Sensitivity: AM (10 dB S/N)
0.5-1.8 MHz: 13 uV
1.8-29.9 MHz: 2 uV
50-54/70 MHz: 1 uV
144/430 MHz: 1 uV
FM (12 dB SINAD)
28-29.9 MHz: 0.5 uV
50-54/70 MHz: 0.25 uV
144/430 MHz: 0.18 uV
WFM (12 dB SINAD)
76-108 MHz: 10 uV
SSB/CW/RTTY (10 dB S/N)
1.8-29.9 MHz: 0.15 uV
50-54 MHz: 0.12 uV
70 MHz: 0.15 uV (European version only)
144/430 MHz: 0.11 uV
DV (D-Star, 1% BER)
28-29.7 MHz: 1 uV
50-54/70 MHz: 0.63 uV
144/430 MHz: 0.35 uV
Selectivity: AM (BW=6 KHz, filter set to Sharp)
6 KHz (-6 dB)
10 KHz (-40 dB)
FM (BW=15 KHz, filter set to Sharp)
12 KHz (-6 dB)
22 KHz (-40 dB)
SSB (BW=2.4 KHz, filter set to Sharp)
2.4 KHz (-6 dB)
3.4 KHz (-40 dB)
CW (BW=500 Hz, filter set to Sharp)
500 Hz (-6 dB)
700 Hz (-40 dB)
RTTY (BW=500 Hz, filter set to Sharp)
500 Hz (-6 dB)
800 Hz (-40 dB)
Image rejection: HF/6 m: 70 dB
2 m/70 cm: 65 dB
AF output power / speaker: 2 W at 10% distortion / 8 ohm
External speaker connector: 3.5 mm, 8 ohm (2-conductor)
   
   
TRANSMITTER SECTION
RF output power:
  HF 6 m 4 m 2 m 70 cm
AM: 1-30 W 1-30 W 1-15 W -- --
FM/NFM: 2-100 W 2-100 W 2-50 W 2-50 W 3-35 W
SSB (PEP): 2-100 W 2-100 W 2-50 W 2-50 W 3-35 W
CW/RTTY: 2-100 W 2-100 W 2-50 W 2-50 W 3-35 W
DV: 2-100 W 2-100 W 2-50 W 2-50 W 3-35 W

NB! The 4 m band is only available for Europe
Modulation system: AM: Digital low power modulation
FM: Digital phase modulation
SSB: Digital PSN modulation
DV: GMSK digital phase modulation
Max FM deviation (Factory set): FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions: Better than -40 to -60 dB
Microphone impedance / connector: 600 ohm / 8-pin (Modular)
Microphone input level: ? mV
   

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]