Icom IC-7760 60th Anniversary Signature Edition (Used)
SKU Part Number: U22134
Icom IC-7760 60th Anniversary Signature Edition in excellent condition with original inner & outer box, manual, hand mic, head to RF deck...
Read More
£4,499.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Icom IC-7760 60th Anniversary Signature Edition in excellent condition with original inner & outer box, manual, hand mic, head to RF deck connection cable, AC kettle lead, PSU for RC-7760 Head, and stand with special edition plaque.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 6 m (Also 60 m for USA and 136 KHz for Europe)
RX: 0.03-60 MHz
Tuning steps: Down to 1 Hz
Frequency stability: Less than ±0.5 ppm @ 0 to 50°C (32 to 122°F)
Mode: AM / FM / SSB / CW / RTTY / PSK31 and 63
Channels / memory management: 99 regular
2 scan edges
Repeater shift / offset:  
Power supply: RF deck
Mains: 90-264 VAC (3-pin IEC C14 connector)
Control head
15 VDC (Male barrel jack, center positive)
Current drain / power consumption: RX: 150 VA
TX: Max 800 VA
Antenna impedance / connector: 16.7-150 ohm (ATU range) / Four SO-239 + two BNC (RX in/out)
Dimensions (W*H*D): Control head:340*118*104 mm (13.4*4.6*4.1")
RF deck:425*149*442 mm (16.7*5.9*17.4")
Weight: Control head:2.3 Kg (5.1 lb)
RF deck:15.8 Kg (34.8 lb)
Other features: Separate control head and RF deck. Remote control via LAN. Two touch
displays; one 7" main and one 2.4" sub. Dual identical independent
receivers and two speakers. Dual spectrum/waterfall display. Audio
scope display. Two DSP (One in the RF deck and one in the controller).

Digital preselector. A total of 15 separate bandpass filters. I/Q output.
The transmitter employs digital pre-distortion technology for a clean
output signal. Built-in auto-ATU. RTTY/PSK encoder/decoder. SD card slot.
DVI-D jack for external display.

Main/Sub band tracking function for diversity reception. VOX. Transverter
jack. Microphone equalizer. CTCSS/PL. Screen saver. USB port for RC-28,
keyboard, mouse and flash drive connection. Electronic keyer.
   
   
RECEIVER SECTION
Receiver system: Direct sampling superheterodyne
IF: 12 KHz
Sensitivity:

HF: Preamp 1 ON. 50 MHz: Preamp 2 ON.

AM (10 dB S/N. Soft filter)
0.5-1.8 MHz: 6.3 uV
1.8-30 MHz: 2 uV
6 m: 1 uV
FM (12 dB SINAD. Soft filter)
1.8-30 MHz: 0.5 uV
6 m: 0.32 uV
SSB/CW (10 dB S/N. Soft filter)
135 KHz: 1.41 uV
1.8-30 MHz: 0.16 uV
6 m: 0.13 uV
Selectivity: AM (Filter: Sharp, BW: 6 KHz)
6 KHz (-6 dB)
15 KHz (-60 dB)
FM (Filter: Sharp, BW: 15 KHz)
12 KHz (-6 dB)
20 KHz (-60 dB)
SSB (Filter: Sharp, BW: 2.4 KHz)
2.4 KHz (-6 dB)
3.6 KHz (-60 dB)
CW (Filter: Sharp, BW: 500 Hz)
500 Hz (-6 dB)
700 Hz (-60 dB)
RTTY (Filter: Sharp, BW: 500 Hz)
500 Hz (-6 dB)
700 Hz (-60 dB)
Image rejection: HF: 70 dB
6 m: 70 dB
AF output power / speaker: 2 W at 10% distortion / 8 ohm
External speaker connector: Two TS minijacks (3.5 mm)
   
   
TRANSMITTER SECTION
RF output power:
AM: 0.25-25 W
FM: 1-200 W
SSB (PEP): 1-200 W
CW: 1-200 W
RTTY/PSK: 1-200 W

100% duty cycle!
Modulation system: AM: Digital low power modulation
FM: Digital reactance modulation
SSB: Digital PSN modulation
Max FM deviation (Factory set): ±? KHz
Spurious emissions: HF: Better than -50 dB
6 m: Better than -66 dB
Microphone impedance / connector: 600 ohm / 8-pin (Male locking ring jack)

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]