YAESU FT-920 160-6M Multimode 100w Transceiver
SKU Part Number: U16946
£649.00 £649.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

YAESU FT-920 100Watt HF transceiver in good condition, Includes manual, microphone and DC power cable. No Box. Collect in store.

 

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 50-54 MHz
RX: 0.1-30 / 48-56 MHz
Tuning steps: 1 / 10 / 100 Hz, 1 KHz
Frequency stability: ±10 ppm (No temperature reference)
±2 ppm with optional TCXO-7
Mode: AM / SSB / CW / "Data" (FM option)
Channels / memory management: 99 regular
5 QMB
10 split
11 call
1 PMS
RAM storage with lithium battery backup (CR2032)
Repeater shift / offset: ±0-5 MHz
Power supply: 13.8 VDC ±10% (6-pin Molex connector)
Current drain / power consumption: RX: Max 2.2 A
TX: Max 22 A
Antenna impedance / connector: 50 ohm / Two SO-239 + one RCA/Phono for RX only
(HF: 16.7-150 ohm with the auto-AT)
(6 m: 25-100 ohm with the auto-AT)
Dimensions (W*H*D): 410*135*316 mm (16.14*5.32*12.44")
Weight: 11.5 Kg (25.35 lb)
Other features: CTCSS/PL. RS232C. Voice recorder. Dimmer. DSP. Dual watch.
   
   
RECEIVER SECTION
Receiver system: Double conversion superheterodyne (AM/SSB/CW/FSK/AFSK)
1st IF: 68.985 MHz
2nd IF: 8.215 MHz
Triple conversion superheterodyne (FM)
1st IF: 68.985 MHz
2nd IF: 8.215 MHz
3rd IF: 455 KHz
Sensitivity: AM (6 KHz, 10 dB S/N)
0.15-0.25 MHz: 40 uV
0.25-0.5 MHz: 32 uV
0.5-1.8 MHz: 16 uV
1.8-24.5 MHz: 2 uV
24.5-54 MHz: 1.3 uV
FM (12 dB SINAD)
1.8-24.5 MHz: 0.5 uV
24.5-54 MHz: 0.25 uV
SSB/CW/"Data" (2.4 KHz, 10 dB S/N)
0.15-0.25 MHz: 5 uV
0.25-0.5 MHz: 4 uV
0.5-1.8 MHz: 2 uV
1.8-24.5 MHz: 0.2 uV
24.5-54 MHz: 0.13 uV
Selectivity: AM (With optional YF-116A AM filter)
6 KHz (-6 dB)
14 KHz (-60 dB)
FM (With optional FM-1 FM unit)
12 KHz (-6 dB)
25 KHz (-60 dB)
SSB/CW/"Data"
2.4 KHz (-6 dB)
5 KHz (-60 dB)
CW (With optional YF-116C CW narrow filter)
500 Hz (-6 dB)
1.8 KHz (-60 dB)
Image rejection: HF: 70 dB
6 m: 50 dB
AF output power / speaker: 1.5 W at 10% distortion / 4 ohm
External speaker connector: 3.5 mm, 4-8 ohm
   
   
TRANSMITTER SECTION
RF output power:
  Max pwr
AM: 25 W
SSB (PEP): 100 W
CW: 100 W
Modulation system: AM: Low-level, early stage (with optional YF-116A AM filter)
FM: Variable reactance PM
SSB: Balanced, filtered carrier
FSK: AF shifted keying (170, 425 and 850 Hz)
Max FM deviation (Factory set): Wide: ±5 KHz
Narrow: ±2.5 KHz
Spurious emissions: HF: Better than -50 dB
6 m: Better than -60 dB
Microphone impedance / connector: 500-600 ohm / 8-pin (Metal locking ring connector)

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]