Yaesu FTdx-5000MP (USED) in-store collection only.
SKU Part Number: U17899
Special Price £2,350.00 £2,350.00 Regular Price £2,399.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in fair condition, only some scratches on the top and side of the case, including the manual, microphone, AC cable and SM-5000. No box, in-store collection only.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.03-60 MHz
Tuning steps: 1 / 5 / 10 / 100 Hz
Frequency stability: ±0.05 ppm (OCXO) @ -10 to +60°C (14 to 140°F), after 1 minute warmup
Mode: AM / FM / SSB / CW / RTTY / Packet
Channels / memory management: 99 regular with alpha tags
5 QMB
9 scan edge pairs (PMS)
Non-volatile EEPROM storage
Repeater shift / offset: 10 m: 0-1 MHz in 10 KHz steps
6 m: 0-4 MHz in 10 KHz steps
Power supply: Mains: 90-264 VAC (3-pin IEC C14 connector)
Current drain / power consumption: RX: 70-80 VA
TX: Max 720 VA
Antenna impedance / connector: HF: 50 ohm / SO-239 (16.7-150 ohm with ATU on)
6 m: 50 ohm / SO-239 (25-100 ohm with ATU on)
Dimensions (W*H*D): 462*135*389 mm (18.19*5.32*15.31")
Weight: 21 Kg (46.3 lb), +2.5 Kg (5.51 lb) for the SM-5000
Other features: CTCSS/PL. Two 32-bit floating point IF-DSP. CAT control. Twin RX.
   
   
RECEIVER SECTION
Receiver system: VFO A: Double conversion superheterodyne
1st IF: 9 MHz
2nd IF: 30 KHz (24 KHz for AM/FM)
VFO B: Triple conversion superheterodyne
1st IF: 40.455 MHz
2nd IF: 455 KHz
3rd IF: 30 KHz (24 KHz for AM/FM)
Sensitivity: AM (6 KHz BW, 10 dB S/N)
0.5-1.8 MHz: 6 uV
1.8-30 MHz: 2 uV
50-54 MHz: 1 uV
FM (16 KHz BW, 12 dB SINAD)
28-30 MHz: 0.5 uV
50-54 MHz: 0.35 uV
SSB/CW (2.4 KHz BW, 10 dB S/N)
0.5-1.8 MHz: 2 uV
1.8-30 MHz: 0.2 uV
50-54 MHz: 0.125 uV
Selectivity: AM:
6 KHz (-6 dB)
15 KHz (-60 dB)
FM:
12 KHz (-6 dB)
30 KHz (-60 dB)
SSB:
2.4 KHz (-6 dB)
3.6 KHz (-60 dB)
CW:
500 Hz (-6 dB)
750 Hz (-60 dB)
Image rejection: 70 dB (HF)
60 dB (6 m)
AF output power / speaker: 2.5 W at 10% distortion / 4 ohm
External speaker connector: 3.5 mm, 4-8 ohm
   
   
TRANSMITTER SECTION
RF output power:
  HF 6 m
AM: 5-50 W 5-50 W
FM: 10-200 W 10-200 W
SSB (PEP): 10-200 W 10-200 W
SSB (Class A): 10-75 W 10-75 W
CW: 10-200 W 10-200 W
Modulation system: AM: Low-level (Early stage)
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set): Normal: ±5 KHz
Narrow: ±2.5 KHz
Spurious emissions: Better than -60 dB
Microphone impedance / connector: 200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
Microphone input level: ? mV
   

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]