Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599
The WaveNode WN-2.UHF is a VHF/UHF RF sensor for use with compatible WaveNode monitoring systems and the Sierra Radio Systems SIR-335 Two Port RF Watt Meter Control Module.
Covering 120-470MHz with a maximum power rating of 300W, this sensor is ideal for VHF and UHF stations where forward power, reflected power, and SWR monitoring are required. It is the sensible sensor choice for 2m, 70cm, and other compatible VHF/UHF installations using the Sierra SIR-335 watt meter control module.
The WN-2.UHF is fitted with 2 x N female connectors, making it well suited to VHF and UHF installations where N type connectors are preferred for lower loss and better higher-frequency performance.
Key Features
- VHF/UHF RF power sensor
- Suitable for use with the Sierra Radio Systems SIR-335 watt meter control module
- Covers 120-470MHz
- Maximum power rating of 300W
- 50 ohm impedance
- 2 x N female connectors
- Suitable for 2m, 70cm, and other compatible VHF/UHF station monitoring
- Allows forward power, reflected power, and SWR monitoring when used with compatible control hardware
- Good choice for VHF/UHF fixed-station, repeater, and remote monitoring installations
- Passive RF sensor with no separate power supply required
Typical Uses
- VHF/UHF station power monitoring
- 2m and 70cm power monitoring
- Remote station RF monitoring
- Repeater site RF power monitoring
- Use with the Sierra SIR-335 watt meter control module
- Monitoring transmitter output power
- Monitoring antenna system performance
- Forward and reflected power measurement
- SWR monitoring in station automation systems
System Notes
The WN-2.UHF is an RF sensor and must be connected to compatible monitoring hardware to display or process power readings.
When used with the SIR-335 Two Port RF Watt Meter Control Module, the sensor provides the RF measurement point while the SIR-335 integrates the readings into the Sierra Station Controller system.
For HF high-power installations, consider the WN-2.HF sensor instead. For low-power HF or QRP installations, consider the WN-2.QRP sensor.
Specifications
| Specification | Details |
|---|---|
| Brand | WaveNode |
| Model | WN-2.UHF |
| Product type | UHF RF power sensor |
| Sensor type | UHF-1 style sensor |
| Frequency range | 120-470MHz |
| Maximum power | 300W |
| Impedance | 50 ohms |
| Connector type | 2 x N female |
| Weight | Approx. 200g |
| Power requirement | No separate PSU required for the sensor itself |
| Typical compatible module | Sierra Radio Systems SIR-335 |
Important Note
This listing is for the WaveNode WN-2.UHF UHF Sensor only.
Sierra SIR-335 watt meter control module, WaveNode meter, coaxial cables, radios, antennas, repeaters, and other accessories are not included unless stated otherwise.
This sensor does not provide a display or monitoring interface by itself. It must be used with compatible WaveNode or Sierra monitoring hardware.
Please ensure the selected sensor is suitable for your frequency range, connector type, and maximum station power before installation.
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]